SOBER SRM

Similar Questions

• Terminal srm command no longer works

  Since Apple has removed the installation Secure Empty Trash, I have used to safely remove files via the Terminal using the m srm or the srm - rf commands.

  I just upgraded to El Capitan for OS X Sierra, and this command seems to no longer exist?

  Anyone know what happened?

  I have not yet updated, but you can install it using the Homebrew (http://brew.sh/).

  %> brew install srm

• read the serial port management using the SRM Protocol

  Hello

  I have a gas analyzer that communicates with the PC via the serial port.

  This is the "Industrial VarioPlus SRM".

  I have attached a PDF file that describes the communication protocol.

  I'm trying to decode the data that are sent from the parser, but I can't do it.

  I have attached the vi in which I made some effort.

  Any help is appreciated, at least for a single value in the data stream.

  Thank you.

  
  

• Testing failover with VMware vCenter / SRM and SQL on protected volume.

  OK, MRS. works well in test mode, although we would like to test a failover / then backspace over the weekend...

  We run SQL 2012 on a virtual machine as well as vCenter/SRM on another virtual machine, both on the protected volumes.

  If the failover stops all VM, makes a new replication then turns on the virtual machine on the DR site, it would fail because we had SQL and SRM on a protected volume?  I can understand moving protected site vCenter / SRM VM to another volume, but SQL Server is also used for other data bases we want protected.  My guess is that MRS is not smart enough to not stop SQL server last.  What should do?  What is everybody doing?

  Thanks in advance.

  You need a RS and SRMDB on both sites. The SRM on the site of DR will manage the entire process and not the vcenter/srm on the production site.

  BTW. a Microsoft SQL Server 2008 Express (R2 SP1) - 64-bit is supportet to SRMDB. Check partnerweb.vmware.com/.../interop_matrix.php

  Kind regards

  Joerg

• HASP SRM (H0033) runtime environment. Windows recognizes the dongle. How can I fix it?

  When you try to open a design that requires a dongle (Pfaff 4 d) I get the error message HASP SRM run-time environment (H0033).

  The laptop recognize the dongle.  I'm using a MacPro running Windows 7 to 8 of Parallels. I checked (best I can) firewalls and virus protection is disabled.  Thanks for any help.

  Hey nanny.

  Thanks for posting your question on the Forums of community of Microsoft.
  Description of the question, we understand that you get the error when the dongle connection.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. the question does when you plug the dongle on another computer?
  2. don't you make changes to the computer before the show?
  
  First follow these steps to make sure that the HASP License Manager Service is started:

  a. click the Start button.

  b. right-click on computer.

  c. click on manage.

  d. in computer management go to Services and Applications

  e. open Services.

  f. Locate the Hasp License Manager and double-click it to open it.

  g. click on the Start button if the service status is stopped.

  If the service status is started, or does not start, you need to know what security software / firewall you have installed on your computer.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• What is Oracle SRM and why is it used?

  Hello

  What is Oracle SRM and why is it used?

  Thank you

  POOJA

  Hi Pooja,

  SRM is used to combine social networks for businesses that use them for advertising.

  SRM Oracle documents are available on:-https://docs.oracle.com/cloud/social/index.htm

  Kind regards

  eDynamic Experts Eloqua

• After restoring the system, I get the error message "Hasp SRM run-time environment (H0033)" during the installation of the software that I downloaded.

  Original title: software download

  I did a restore on my laptop and had to re - install software.   He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it.   I already ran a "solution" to the problem and it did not help.   This software has no problems prior to the restoration.

  Hello

  This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.

  1. what security software is installed on your computer?

  2 What problem confined to a specific software or with any other software?

  3. are you referring to the resolution of problems by running to solve the problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.

  a. press Windows + R keys, type Services.msc and press enter.

  b. Locate the Hasp License Managerservice.

  c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.

  d. If the Start button is gray, then click the Start button to start the service.

  e. click on apply then Ok to save the changes.

  Method 2:

  If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.

  Note: Antivirus/firewall software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please reply with the status of the issue so that we can better help you.

• Permissions on SRM

  Hello

  A new user was added and received the permissions on the vcenter server, then as an ADMINISTRATOR of SRM. But with this permission, he couldn't run recovery plans or create protection groups. What should I do to give all permissions of srm.

  What is the level of permissions granted to the user in vCenter.

  Also, make sure that it is a Director SRM for both Sites.

  It's the SRM administration guide

  "SRM determines if the operation is allowed when protection is configured, rather than when the operation is complete. After that MRS. verifies that the appropriate permissions are assigned on vSphere resources, future actions are carried out on behalf of users by MRS using the vSphere administrator context. For configuration operations, the user's permissions are validated when operation is requested. Other operations require two phases of validation. When configuring, SRM 1 check that the configuration of the user's system has the required permissions to complete the configuration of the vCenter object. For example, a user must have permission to protect a virtual machine and use the resources on a vCenter Server secondary that would use the recovered virtual machine. 2 the user running Setup must have permissions for the task. For example, a user must have permissions to run a recovery plan. The task is then executed in the administrative context. "

• Cannot export the history report to SRM 5.8.1

  Hello

  Basically, I have my main recovery plan, and I have done testing/cleaning/migration/re-protects all ok, but I want to export history reports.

  I choose the type of report I want (html/doc, etc.), I click on generate report. It generates very well. But when I click on download... I get nothing. I click on it and click on it and nothing happens?

  I tried chrome and firefox, I restarted the service of srm on the two sites, the WebClient service on both sites. I had another user tries and no joy, I simply can't the report to export.

  But any other plan, plans I have no interest in. Any fine export?

  I have connected a deal with VMware support, but I'm curious to know if anyone has come across this problem?

  See you soon

  Might be a bug known - the Recovery Plan has a special character in the name, such as / or %?

• SRM reporting

  Is anyway to report on SRM settings - such as IP address, the data store recovery record, etc.?

  Not in vROps but you could possibly use PowerCLI to export this information if necessary.

• Vcenter merging with SRM

  Hello

  Currently, I have two datacenter (DR/DR) running vcenter separated with MRS.

  We have plans to consolidate the two datacenter and use a unique vcenter instead of two. and is no longer intend to use RS.

  Someone can guide us. Any documentation or reference is very much appreciated.

  Thank you

  Not sure on the documentation for this scenario, but what you can do is failover machines virtual site vCenter that you no longer want to use and after the failover, just decommission the SRM.

  About uninstall RS, see the documentation: Uninstall Site Recovery Manager

• U2, SRM and SRA vCenter 6.0 compatibility

  Hi all

  We currently have vCenter 5.5 Update 2 with SRM 5.8.1 and SRA for EMC VNX (EMC VNX SRA with MirrorView Enabler for 5.0.39 VNX) and want to upgrade to vCenter 6.0 Update 2.

  In the table below (from VMware interoperability matrices):

  VMware Site Recovery Manager	6.1	6.0	5.8.1
  VMware vCenter Server 6.0 U2	THERE
  VMware vCenter Server 6.0 U1	THERE	THERE
  VMware vCenter Server 6.0		THERE
  VMware vCenter Server 5.5 U2			THERE

  I see that vCenter 6.0 U2 only supports 6.1 SRM.

  I looked here:

  Download VMware Site Recovery Manager for disaster recovery and planned migration

  For the SRA that I need (EMC VNX SRA with MirrorView Enabler for VNX) and couldn't find it there.

  This is a chart of the VMware Compatibility Guide:

  Name of the partner	Name SRA	Version SRA	SRM version (s)
  EMC	EMC VNX SRA with MirrorView Enabler for VNX	5.0.2 / 5.0.39.139	5.8 SRM | SRM 5.1 Update3 | SRM 5.5 Update1. SRM 5.5 | SRM 5.1 UPDATE 2 | SRM 5.1 Update1 | SRM 5.1
  EMC	EMC VNX SRA with MirrorView Enabler for VNX	5.0.2.77/5.0.39.149	SRM 6.0 | 5.8 SRM | SRM 5.5 Update1. SRM 5.5

  According to this, there is no SRA for MRS 6.1.

  My questions are:

  1 MRS. 6.0 works with vCenter 6.0 U2 (I know that it is not taken in charge with respect to the interoperability of VMware)?

  2. for employees of VMware - do you know if there is an adapter (for EMC VNX) to version 6.1?

  Bottom line: I am looking for EMC VNX SRA with MirrorView Enabler for VNX SRM 6.1 (which is the only currently taken SRM supported by vCenter 6.0 Update 2).

  
  

  Thank you!
  

  Hello Daniel

  Your questions:

  1 MRS. 6.0 should work with vCenter 6.0U2, but as you mentioned, it is not supported by VMware.

  2. as far as I know, such a DSM is underway. I suggest you speak with your EMC representative to confirm that and give you an ETA.

  Best regards

  Stefan

• support of the SRA in the Air of SRM

  Is Air SRM (part of vcloud Air) supports the SRA (array-based replication now)?

  vCloud Air DR only supports replication of vSphere. SRM Air has not been published yet, when / if it is released it only supports VR as well.

• Upgrade SRM

  Hi people, we running vSphere/SRM 5.5.x and planning upgrade infra to 6.0 with the latest update. As MRS. isn't live upgrade to 6.1 5.x. We intend to upgrade vCenter 5.x to 6.0 Update 2 (not supported by MRS 5.x or 6.0) then do immediately after upgrade of MRS. 5.5 to 6.0 and 6.1.

  I just wanted to clarify if the same thing will work as vCenter upgrade to 6.0 Update 2 is not supported by MRS 5.5 or 6.0. Or there are two phase upgrade from vCenter (5.5 to 6.0 and then 6.0 Update 2)?

  Thank you!

  Hari.

  Unfortunately this will not work. For SRM install 6.0 successfully, it must have a version compatible to save with vCenter.

  For properly updated need you to upgrade VC 6.0 GA or U1, then MRS. 6.0, then VC 6.0U2 and SRM to 6.1

  The alternative is to simply upgrade VC 6.0 U2 and then perform a new installation of MIS 6.1. It's perhaps easier according to the amount of data SRM would need to be reconfigured.

• Mappings of data store for replication Multi VM in SRM 6.1

  In an earlier version of MRS. datastore mapping was necessary if someone wants to replicate several virtual machines of VR. But how to do this in 6.1 SRM?

  VR is a replication solution that does not require "datastore mapping" just VM source and target data store.  Just several virtual machines with RV replication requires selecting the same target for all that are selected at the same time data store. This does not change 6.1 RVing and SRM has no impact on this.