Socket

I notice that it looks like an iPod connection. It adapts to the docking station - but it does not work in a docking station and I tried 4 or 5 in the comet.

What is my rocket a problem - or is it simply not constructed to connect to a docking station.

Thank you

While making the "rocket" resembles a connector ipod, it is wired differently. Connection of a rocket to ipod accessories via the socket will not work and could damage the "rocket". There are a small number of docking stations that are made for the "rocket". Those that could be used.

Tags: SanDisk Sansa

Similar Questions

  • Protocol of socket error .dmg

    Hello

    I m getting an error after installing a .dmg file.

    'bad protocol socket.

    I tried with the steam file, a download of safari and firefox and other files and all the same.

    What can be the problem?

    If one do to a comand + R and reinstall the os x that I lose my files in my mac?

    10.11.5 OSX

    See this link... https://origin-discussions-us.Apple.com/message/30241578#30241578

    Basically, you have to reinstall OSX Recovery Mode.

    Simply choose reinstall and you won't lose anything. You should have a back right up.

  • I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

    Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

  • Slow, Satellite Pro M70: xferrecv_recvMain2(): error socket() 3135, 10106

    Hello world

    Since yesterday, I have problems with my laptop.
    He needs minutes after minutes to start and then I get no connection to my WLan system. When starting, I get after a while the message "xferrecv_recvMain2(): error socket() 3135, 10106.»

    Right now I can t use the laptop, because she needs a lot of time to react after you start a program etc.

    What is a defect on the chips of RAM?

    I use the factory ones, not additional ones.

    Thank you very much for your support.

    Best regards
    Patrick

    You can test the memory with Memtest www.memtest.org. Its a floppy disk or a bootable CD.

    The HARD drive could be faulty, check using the advanced options of Hitachi DFT test (find it in Google).

  • Tecra 8100 TV problems? What Socket? cable?

    OK so I have a Tecra 8100 laptop

    > running everything well... except that I can not get the TV out socket work...
    > Ive got windows XP on it...

    first thing I want to know about the housing - it is a Jack of 3.5 mm (NOT of RCA or S-vide0)

    > so I finally managed to get a Jack 3.5 mm cable video, audio...
    > which connected to the TV... nothing

    I have the cable entry?

    in display properties, I installed the drivers of duo, and there are a few additional options...

    > what confused me, it's that there are 2 monitors there... but is it because of the VGA?
    > I tried pressing FN + F5... but not had any luck

    Is there something simple that im missing like a cable?
    > or a piece of software...

    Hello

    As much as I know on the right side you will find a video taken of output. To use this video on the service, you will need to use a RCA video connector.
    Please also check the settings in the BIOS. Here, you set the type of TV signal and select television as an output device.

    To connect the TV, please follow these steps:
    1 turn off the computer
    2. use the composite video cable to connect the TV to the video output port
    3 turn on the TV
    4. turn on the laptop

    I hope this helps.

  • 17 '' HP Pavilion: upgrade HP Pavilion - Socket FCBGA1170 - 4 core CPU N3700 @ 1.60 GHz

    I have a 17 "HP Pavilion notebook with an Intel Pentium CPU N3700 @ 1.60 GHz on a Socket BGA1170, with 4 cores and Max TDP of 6W with 8 GB of RAM with Windows 10.

    I find this combination very slow and walked if I could switch the CPU to a faster? I look forward to your recommendations

    Another consideration is the upgrade of the standard SATA 1 TB HD HTS541010A9E680 to a 1 TB SSD. Or would it be too expensive.

    Thanking you in advance for your answers.

    Fred

    +++ fK

    We do not have your exact model, but on most of the Trail Bay models I've seen (series N processors Pentium and Celeron) the processor is soldered to the motherboard and there is no distinct ability to change the processor. FCBGA1170 means that it is a Ball Grid Array which means welded on. 1 TB SSD are about $300-380.

  • How to open sockets?

    I used the front sockets on older Unix, but now calls are slightly different and I wonder:

    Can anyone show me a simple C code for opening a socket (for the portion & client)?

    I would like to start here:

    https://developer.Apple.com/library/Mac/documentation/NetworkingInternet/concept ual/NetworkingTopics/Articles/UsingSocketsandSocketStreams.html

  • HP Envy Phoenix 810-460: HP Envy Phoenix 810-460 K5G86AA MSI Kaili2 MS - 7826 V2 Intel Socket 1150 Broadwell upgrade

    My father bought this computer in August of last year just before that the 1150 of Socket Intel chips Broadwell (5775 i7 and i5 5675 C).  This HP computer contains a Z97 chipset which should have support for both of these chips with a BIOS update.  However, I have not seen any this BIOS update released from HP the HP PC Hardware Diagnostics UEFI which I can't not running on his computer.  It will be prudent to drop the chip in one of these processors without a BIOS update and properly executed?  Thank you.

    Greetings,

    I don't think that the Broadwell chip will work on this PC BIOS from HP support.

    There is a BIOS Update HP under Win 8.1 (sp71809.exe). There is no documentation HP included that this update of the BIOS also supports Broadwell.

    See you soon!

  • Satellite L30: It is possible made evolution of microphone to a line-in socket

    Is their anyway to change the mic to a line plug into the socket
    I presume that the L30 doesn't have a line in socket

    Thanks for the tips

    Unfortunately, I put t think something like that is possible.
    Is that the laptop does not support Line-in input.

    But maybe you'll be able to buy a PCMCIA sound card that supports this interface.

  • Qosmio F20-130 - damaged USB socket

    OK, I don't want just a response 'Please take it to a reputable Toshiba dealer!

    I just tried to put a USB device into my USB port the closest, and he seems to have completely pushed into the workings of the plug! I have not forced or something!

    Are part of the motherboard USB Sockets? If Yes, what is the cost to retail for a new Board of Directors? Can you recommend someone near St Albans? I don't want to be without this laptop for awhile but have free a few weeks at the end of January.

    Concerning

    Keith

    Hello

    I won't you please take it to a reputable Toshiba dealer"but ask someone to Toshiba service provider in your country for advice
    As Reaver mentioned ports are part of the motherboard, but you don t you need to replace the whole motherboard. The technician with experience can fix these ports

    On this page you will find the database with the service provider in the world:
    http://EU.computers.Toshiba-Europe.com/-> support-> support & downloads-> from the home page find an authorized service provider

  • More than 2 Sockets of RAM Qosmio X 770 - 107 or another?

    Hey guys,.

    I found two entries in tools Systeminformation, and I can't believe if its right.

    [4 Slots of Ram | http://imageshack.us/photo/my-images/804/ram4.jpg/]

    If there are really 4 Ram slots, has perhaps its best to run Notepad with 16 GB of RAM... (4 x 4 GB - 8 GB possible Modules not supported).

    Here, someone who can check if it has really 4 Sockets in RAM in the laptop?

    I used to make the visible slots on the programs:

    EVEREST Corporate Edition
    CPU - Z 64

    Hi nvomlehn

    The Qosmio X 770 motherboard supports two memory locations.
    The information that will certainly not my CPU - Z.

    Welcome them

  • Satellite L300 - T2FTP Windows sockets of initialization failed

    After login, I get the following message:

    T2FTP Windows sockets of initialization failed

    At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.

    Before that I did NOT add a new hardware device.

    Click the button start only generates a message: Windows Explorer does not react.
    It is impossible to call any other routine.

    Unfortunately I can not find my recovery CDROM.

    Are there opportunities to save my system?

    Toshiba Satellite L300 model PSLB8E
    Windows VISTA-32 bit

    Hello

    I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.

  • Satellite L30: CFSServ "Windows Socket error.

    Hello

    Every time I try to go on internet, this warning sign appears (a yellow triangle with an exclamation mark inside) saying CFSServ "Windows socket error.
    It allows me to go on my internet (what is broadband) gave me solutions such as put the Windows XP CD in the CD drive and repair of each file, but the thing is, I never gave me a cd of Windows XP in the first place! As soon as I opened the box and set up the laptop, there is no CD of windows xp.
    (I'm typing this from my desktop computer) I wish that all solutions on how to get rid of this problem.

    Thanks to all who help.

    Post edited by: ringmaster164

    First you get a Toshiba Recovery CD and not an original Windows OS CD.
    In this case, if you want you can retrieve the whole OS. All Toshiba drivers are preinstalled on the image.

    Now to the error:
    cfsserv.exe is a process belonging to Toshiba ConfigFree utility and search wireless devices.
    However, malware often use the names of valid program to try to hide themselves. So, please run a full scan with Ad-Aware in making sure you have the latest definitions file.

    If it doesn t work I recommend the ConfigFree tool for some audit settings.

  • Pavilion Elite 300Z: identification of card mother sata socket

    My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?

    The plugs are numbered from 1 to 6.  The boot order will follow in succession.

    I found a reference.  Can you check the color and number?

    Dark blue - disc 1

    White - disc 2

    Light blue - Disc 3

    Yellow - disc 4

    Red - disc 5

    Black - disc 6

  • Star Wars 15-an002ns: SSD installation socket m2

    Hello

    Recently I bought HP Star Wars Special Edition laptop for laptop - 15-an002n, which comes with 1 TB of HDD. I think it is too slow for the overall power of the rest of the components, and I intend to install a SSD for the OS. Consulted the manual, I see that the laptop has a blank m2 socket and some versions include an SSD there:

    M.2 SATA-3 (NGFF):
    ● SSD 256 GB, 2280, M.2, SATA-3, TLC

    I installed some other SATA III SSD, but never a type m2. My questions are:

    1 are there compatible with lower capacity models? I want to just install the OS here, so it would be enough with M.2 128 GB SSD.

    2 how the BIOS will recognize the new drive as primary drive? I need to change the settings?

    3. I alter anything else in the computer. This update will void the warranty?

    4 is recommended for installed the OS from scratch in the new drive or could I use disk clone software? In this case, which?

    Thanks in advance.

    Currently, there is a problem with end users not being able to get this empty housing to recognize a M.2 WSSD drive added after delivery to the details of the laptop. Technically, the trying to jeopardize the warranty but who never stops the hard core of the valuation. So for the time being, until HP provides an answer as to what is happening with m2 slots, I do not recommend that you do the upgrade. If you want to go faster, I recommend that you install a SATA 2.5 inch SSD in place and place of the mechanical hard drive. Even that, however, will show warranty issues.

  • Is the CPU socket socket 478 and 479 on Satellite 1110

    Does anyone know if the celeron processor in a 478 socket or 479?

    Thank you very much

    Everything I found on the CPU are these information:
    The Intel Celeron processor
    -Speed: 1.8 GHz
    The processor bus speed: 400 MHz
    Integrated memory cache L1: 12KB
    Memory integrated L2 cache: 256 KB

    In addition the 1110 series computer is equipped with a controller of Intel 845MZ system; Intel ICH3-m for PCI to LPC Bridge, PCI IDE controller and the logic of power management;
    NS87591 for keyboard/controller, battery unit and RTC management; OZ6933 for
    PCMCIA Card Bus controller; ATiM6-C for VGA controller; ALC202 for AC97
    CODEC; FDC47N227 for super i/o controller.

    For me, everything looks like a CPU with a socket 478

Maybe you are looking for

  • Airport extreme - 6753 error

    I had this airport extreme for several years and could access the utility via my PC without ever a problem. I had updated a port forwarding for a security system, and then set a NAT address when he created the error. Now I can't access the utility wi

  • Using two channels of both HAVE ANSI C

    Someone at - it an example in ANSI C to 2 different transducers at the same time data collection? The examples I've seen are for one HAVE only. I need to collect data in the form of two distinct components. AI0 data should not be discarded with AI1 d

  • Remove Windows 10 W510 without recovery disk

    I made the mistake of 10 windows installation without creating recovery media. I am desperate to return to windows 8.1, but how can I, please can you help me?  God I wish that companies have given discs like the old days. Help, please

  • HP Compaq Presario V5000 Intel 945GM motherboard computer laptop - 430198-001What processors can be used

    HP Compaq Presario V5000 Intel 945 GM laptop motherboard - 430198-001, which processors support this mother borard, it says in the spec supports dual core processors, it is unclear at what speed or spec that it comes with a celaron, 1.4 ghz processor

  • To uninstall the digitalpersona finger printing software

    I installed the DIGITALPERSONA personal finger print software on my labtop Windows 7 Professional. It is inconsistent and does not. There is no uninstall utility, how can I uninstall this software correctly? Brandon