Software HP does not detect my printer, but I can access it directly by ip address

Similar Questions

• Windows xp64 does not detect the printer hp laserjet p1102

  Hello

  Windows XP Professional X 64 Edition Version 2003 is installed on my server.  It does not detect the printer HP Laser Jet P1102, it needs of Virtual Port USB 001.  When I connect my printer, Windows does not detect the printer.  I lost the CD for the printer.  When I try to install the printer with drivers downloaded HP, it gets sleep showing message "Connect your USB cable" when it is already connected.

  Also when I try to connect to the printer on my workstation, Windows XP Professional 32-bit Edition, it must be connected, but off, the sharing is lost with other workstations, even if I set the static IP for all.

  Hello

  I suggest you post your query in the TechNet forum. Please post your question in the link for assistance below: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

• 4380 all-in-one printer does not detect the print cartridge

  My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

  I'm sorry you have a problem with your ink not detected.

  The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

  For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

• CA410 all-in-one will not be installed... does not detect the printer

  Help... cannot install printer s/w

  I have a PC running W7 64 bit

  Printer is all-in-one CA410B... It was installed and running, a couple of days he threw error "missing components" and would not printing software launch.

  Tried to re - install... failed

  Most recent downloaded software file... Tried to re - install... failed

  Removed all... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install "as Administrator"... failed

  Each time, it happens to the screen to plug the USB cord... I do it... get the "Boing" sound so I know PC has detected the USB device... and I see "Installing message device driver"... but the HP software does not see that... and stop right there.

  See the attached screenshot

  If I check the box to continue without attach printer full installation does not occur.

  In Device Manager, it says "Photosmart Prem c410" if I removethese it will not install

  I guess that W7 is detect the printer and with the help of a driver that is installed, rather than seeing the HP software that? the clues how to get around this, I want to get the complete package installed it again.

  

  Try using the brush included in the CD or download.
  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/VQW7M
  11 start the download to reinstall the printer
  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/VQW7M
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4uninstall.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/VQW7M
  16. run the download to reinstall the printer

• Windows 7 does not detect my printer, even if I can enter an IP address and access

  I just bought a HP Windows 7 64 bit Home Premium laptop computer for my wife a week ago. I made the easy transfer of his old laptop XP and reinstall the printer driver for our network Canon MX860 printer. It is networked via an ActionTec wireless router. The MX860 is configured for a connection cable and a cable cat 5 to the router has. Printing worked for a few days and then stopped. I uninstalled the driver and redownloaded the driver from Canon site for 64-bit Windows 7. Then, I tried several ways to get the printer working:

  1. on a wireless connection to the router, I used the Canon Installer, I get an error saying that no printer was found and I had to cancel the installation. (On the laptop, I am able to connect to other computers on the network and surf the net. I can enter the IP address of the printer (192.168.1.4) and pull upwards to a Web page showing he has an active status. I also have other laptops Windows XP that connect this way and have no problems.

  2. also wireless, I went to the printers and devices in Windows 7 and has chosen to add a printer and then chose the network option, he looked for a minute or two and then he said No printers found.

  3 and 4 - I tried 1 and 2 with the laptop connected to the router via a cat 5 cable.

  5. I tried to configure the printer via USB and works. Then I tried to change the port of the printer with a network port, and in the process GET a message that says the printer can not be detected.

  When I click the network button on the Start Menu, it then shows the printer. If I double click on the printer, it gives a message saying that the WSD driver is installed successfully, then the load the HTML of printers page, and once again, it shows the device according to availability. But I am not able to print.

  Therefore part of Windows 7 detect my printer and allows me to access it via HTTP and the other part of Windows 7 says that it can't find it.

  Is there hope for me? My wife wants to print and I feel like a jerk, because I spent the hours and have nothing to show for it. I bought the computer at Costco a few days ago and I guess that one option would be to return. I know that the printer works on a laptop with XP and Vista. I'd be better off getting another machine or even another machine with a different OS?

  Hello Walter B
  Please write to the Microsoft Forums.

  To help you better, please answer this question:

  1. have you installed the drivers of network printer canon MX860 series MP Driver 1.02 for the network worm?
  2. is network discovery is enabled?

  Try the following steps:
  (A) to install the drivers for network printer canon MX860 series MP Driver Ver 1.02 for the network, you can check this link.
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&ModelId=18121

  B. to enable network discovery:
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  C. I suggest to disable all security software and firewall on the computer and check if it helps.

  (D) I also suggest you to find and add the printer manually:
  If Windows can't detect a printer that you want to use, follow these steps to find and add the printer manually:
  1. open Printers by clicking the Start button, clicking Control Panel, hardware and sound and then click Printers.
  2. click on add a printer.
  3. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  4. on the page choose a network printer, click the printer that I want isn't listed.
  5. on her search for a printer by name or TCP/IP address page, choose how to find the printer you want to use, based on the type or location of the printer, and then click Next.
  6. follow the steps in the wizard and then click Finish.

  Please visit this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Windows Vista does not detect the printer

  had the printer works fine until Windows vista did an update. Now hp poster printer not detected

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• DVD autorun.exe opens main html.menu very well, but when click on hyperlink in the menu it opens the new tab, but does not play a video, but the video html works directely

  Autorun.exe DVD opens with main menu.html. then when I click 1. HTML which is ment to start (from the main menu.html) only to open a white page only and plays not the file using src = flvplayer.swf player flash video. (it works on all other browsers) fine. Installed the flash plugin but still does not not in Fire fox. But when I navigate to the root of the cd and click 1. HTML it opens and plays very well, but do does not form the main menu.html. any help would be grat

  Thank you

  In your main.html:

  • What is the URL in the address bar?
  • What is the URL of the link?

• Keyboard does not not on the desktop, but I can access the BIOS

  I have a desktop Compaq Presario SR1220NX w / XP SP3. Using the keyboard I can access the BIOS (F1), but it stops working when I get on the desktop. I tried 2 P/S, USB, wireless keyboards (they are all worked on other computers) and they do not work once I get on the desktop. When I press a key on the keyboard they make a thud. I have the latest version of the BIOS.

  I have reset the BIOS to its default settings, but it does not solve the problem.

  Any suggestions on how to solve this problem would be appreciated.

  Can you start in SafeMode (f8) on the blue HP screen?  If you can, then you might try to return to a well known system restore point.

• Webcam does not work on Skype, but I can get a preview in the video settings

  My webcam is not working for Skype calls, but I can get a preview on the Skype video settings and it also works on the various programs and services that use the webcam. This problem occurred recently when Skype has updated to the new layout

  Hello

  Sorry for wasting time, but the problem was that were far too many people in the Group call and that smaller groups make the video work

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

  need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

  Hello

  Which SSD drive you have exactly?
  I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

  So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

  By the way: have you tried to load the default settings in the BIOS?

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Satellite P10 304 BIOS does not detect HARD and CDROM drive

  My HDD p10-304 has recently failed.
  I bought a new 60 GB western digital 2.5 drive "and installed today.

  At startup, the BIOS does not detect the drive, but also, it does not detect the CD-ROM drive.
  This makes me think that maybe it's not the player after all, maybe the onboard IDE / motherboard.

  I'm kinda stuck, so it's a new drive should work fine, and I have no way to test the motherboard.

  The only difference is that the insulation on the original drive sleeve should be reduced by half.
  The bit important (low, where the circuits would otherwise affect metal) is always there, it is the
  Few albums I had to remove but that should be no problem.

  Someone at - it suggestions?

  Thank you, Stu.

  Hello

  What happens if the HARD drive is not connected to the motherboard? The BIOS recognize the CD/DVD drive correctly?

  You bought the HARD drive compatible? To my knowledge the Mobile supports a HARD drive with interface IDE (ATA-5) increased.

  But as you said possibly the motherboard failures and he would be advised to contact the technician during a particular test

• MAX does not detect the module

  I am part of a team of the FRC and putting in place a Board very easy test to use to test the components.

  I try to use a cDAQ-9171 therefor, with the modules normal FRC - 9201 analog, 9403 for digital and 9472 solenoid.

  When I connect the cDAQ to the computer, MAX detects it and displays it in the tree view on the left. However, when I insert a module (9403), it does not detect it.

  I can do a device simulated, and a simulated inside that module and which works very well. But of course that accomplishes nothing.

  Any ideas? I tried Googling this problem, but I guess that my research skills need work because I found nothing.

  Hi NeatNit

  You're right, DSM is irrelevant in this case.

  I forgot to ask - it's just 9403 module which is not detected or none of them are actually?

  Kind regards

• XP MOVIE MAKER DOES NOT DETECT NOT CAMERA

  I CAN'T DOWNLOAD VIDEOS FROM A CANON FS 200 CAMERA IN MOVIE MAKER. WHAT I GET IS A BOX SAYING THAT IT DOES NOT DETECT A DEVICE. HOW CAN I DO THIS

  No guarantee... but the following link might be worth the drive:

  Use. MOD with Windows Movie Maker files
  http://www.YouTube.com/watch?v=m31Ji4U5jWI&feature=related

  FWIW... you can download SDCopy from the following site:
  http://duckhouse.weebly.com/sdcopyexe-download-page.html
  (no installation required, just unzip the file and run it)
  by opening the folder and clicking on the left... sdcopy.exe)

  Another link that can be worth a visit:

  How to edit JVC. MOD files in a few easy steps
  http://www.YouTube.com/watch?v=ZY-cKaCEUJ4

  A search on YouTube can turn more useful tutorial videos.

  Good luck...