solid 1710n, all lights printer locked, cannot reset

Similar Questions

• mechanism error print cartridge cannot move. C3180 all in one

  It will not be printed.  I got this error

  mechanism error print cartridge cannot move.  Turn the printer off.  Free cradle of cartridge.  I checked the cradle.  He moves very well.  The only way I can get the red light to go on top of the computer is to disconnect the two cords for 30 seconds and reconnect.

  I've uninstalled and reinstalled the software from the disc that came with it.

  In desperation, I tried anything that might help - checked for paper jams, changed two inks, processed on.  Restarted the computer.   A prayed and begged for it to print.  Nothing has worked.  My computer was purchased in 2007.   Maybe it of just old and has mechanical problems.  I don't have the time to go printer hunting this weekend and want to print something today.

  If anyone has any suggestions I would be very happy.

  Thank you.

  Reset the printer - turn off, remove power from the back of the printer (not the wall), wait 5 minutes, plug back in and turn on.

  Indeed, it may be stuck and dead, but it's really the only thing you can do to get it back.

• Photosmart 6510 "Printer Error" and all lights flash

  I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.

  When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.

  Symptoms:

  1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."

  2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"

  printer does not print

  3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer

  4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.

  Have you tried the following.

  1. hard reset (more than once - fired power and USB)

  2. uninstalled and reinstalled software and drivers

  For any help or suggestion will be appreciated.

  Possible solution

  I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.

  Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.

  Hope this helps someont with this problem.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Suddenly, all the printer drivers on Windows update are not digitally signed? So, how to re - install my 3 printers?

  Suddenly none of the printer Co. provides always the downloaded drivers more! And they all quit working, pilots didn't is more accepted, after problems with the Windows updates in general, seem to be fixed now.

  And I finally see HP instructions for a workaround 4 pages long, in Device Manager. But no driver is never accepted to be unsigned digitally suddenly...

  All the printer drivers on Windows update are digitally unsigned? So, how can I install my 3 printers? They are too recent to have discs and HP and Lexmark refer to Device Manager find but none will install because they are not digitally signed. I have W7, W10 and a XP computer for when I have a really frustrated with Windows. Like now.

  How can I reset W7pro and W10pro to accept these drivers yet once, to accept unsigned drivers? What is going on!!!

  Thank you

  I fixed most of my problems of

  -Restore W7 to the 07/01/16 mode without failure and update of the manual setting W.

  -Go back to Firefox 32, with no updates

  -find something new called firewall W features advanced security and made some slash and burn allowing in there

  That's all the misfortunes of weird denied permissions disappeared. I guess I'll stay frozen in time until I get a real solution to all this new protocol permissions I lock the...

  Thanks to you all. I can finally sleep a bit now!

• Cannot reset Apple ID same security issues with the link for valid reset. Help?

  So, I'm trying to reset my security questions, because I forgot the answers. I followed all the procedures to do, but it won't work.

  I clicked on the link for reset enter my Apple ID account page, then get the message: 'Reset Instructions sent. An email with the instructions was sent to @emailaddress. Follow the instructions in the email to reset your security questions. » - OK

  I opened the email: "Dear ME, recently made you a request to reset your Apple ID security questions and answers. To complete the process, click on the link below. Reset now >"I click on the link, it opens a new window with a login screen. - OK

  On the login screen, I entered my account information, email, and password in the fields and click the button to continue. Instead of connect, I get the message pop-under from the password field as follows: - FAIL

  I try again and again, but it never works. Whenever I get my password and trying to proceed, the loading spinner runs for a bit, then I get this message "to reset your security questions, sign in to your account and start again." I have never spent this page and in a region where I am able to actually reset my security questions. I tried with all browsers, Firefox, Chrome, Safari... nothing works. Now, I have tried 3 times reset by e-mail. It will not work. What is going on? Is the site broken?

  To make things worse, I don't have an option to call for framing according to the Apple website. The only option I get is to contact my operator. What the * is my carrier will repair my Apple ID? It's very frustrating say the least. Someone please help!

  You cannot reset the Security Questions If you forgot the. You can only reset them if you know them (which means that you also know your password).

  You can contact the Apple Support here to have a reset link you sent once they verify your identity:

  ACCOUNT SECURITY SUPPORT

  Good luck

  GB

• Cannot reset Firefox.

  When I start Firefox, it happens with Yahoo, NOT with the default Firefox. If I try to reset Firefox, I get the response "well, it's embarrassing" and cannot reset. I went to the deleted control panel Firefox and downloaded and re-installed FIrefox from the site of the Mozilla Foundation, and the problem still persists. I can't get rid of Yahoo.

  As a side note, Chrome works OK. When I start Chrome, I automatically open four tabs. From time to time, opens Chrome a fourth tab... and it's Yahoo. I can go into the settings and delete the fourth tab and everything is OK for a while, but eventually the fifth tab opens again, and I again to remove. Don't know if these are related issues, but I don't believe in coincidence.

  I use WebRoot security and have scanned my PC and deleted all the threats. As WebRoot is, my PC is clean.

  You can check the suspicious extensions or recently installed unknowns.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I have a HP Deskjet D4160 printer. The reset button will Flash. Diagnosis HP said there was a "breakdown of pen", but he didn't give any directions on how to fix it.

  Original title: breakdown of pen deskjest d4160

  I have a HP Deskjet D4160 printer. The reset button will Flash.  When I ran the HP diagnostic he said there was a 'pen failure' that had to be fixed, but he didn't give any directions on how to fix it.

  Hi Fred Cornell,.

  ·         You have any problems with the performance of the printer?

  ·         What operating system is installed on your computer?

  ·         The printer works well before?

  You can check the link mentioned on official website of HP that describes the problem for the specific printer model you are using.

  Flashing lights in the HP Deskjet D4160 printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00635074&cc=us&DLC=en&LC=en&product=501857#n129

  Alternatively, you can contact HP support for help on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

  Let us know the results.

• two locks of laptop see the light as lock sign1 and lock signed and fully offshore

  Hello

  I have HP 6730 laptop computer b today, when I start it show me

  two locks light as ld (lock sign1) and (lock signed) and turns it off completely

  lock sign1 means a pic of lock with number 1

  average of locking signed a lock with a text pic

  It's not start all these two locks photo blick 2 times, then turns off completely another conduit of speakers and! and illustrated also box.

  No display at all.

  Please help what is this error?

  Thank you

  Those are the LEDs for shift caps lock and number lock. The fact that your computer does not come on and the lights flash means that the laptop trying to communicate an error code. See LED display empty Error Codes for more information.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• 5640 envy: Envy 5640-can we print but cannot scan

  Hello

  I can print but cannot scan. I restarted it printer and pc, plug in the printer and the computer, the HP scan doctor and did the updates. Scanning HP doctor break WIA Scan this part and not finished troubleshooting.

  How can I solve this? Thank you.

  Hello

  Thank you for using the forum.  You will need to install the full features printing software to scan.

  You have downloaded and installed the software features FULL?

  Here "link for your convenience;

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5640-e-all-in-one-printer-series/6583033/model/6583034#Z7_3054ICK0K8UDA0AQC11TA930C7

  Please select the correct operating system and download the FULL features software.

  We recommend that you uninstall the current software before you reinstall the downloaded software.

  You can try using the Auto Connect Wireless HP if your want a wireless connection of your computer to your printer.

  You will need restore your network wireless to factory default using the Auto Connect Wireless HP.

  There are the following videos very useful for wireless setup.

  Restore the printer network settings

  https://goo.GL/9fyrGS

  Setting up the printer using HP Auto Connect Wireless wireless

  https://goo.GL/oBY6AJ

  Let us know how it turns out.

  Thank you.

• HP8500 A909A, the installation program recognizes printer, but cannot connect

  HP8500 A909A, the installation program recognizes printer, but cannot connect

  Ok.

  It is installed by USB on the other printer?

  Did you share the printer?

  have you set up a virtual usb port?

  Have you tried to use the diagnosis of HP printer installation utility to help Setup and configuration of your printer?

  It would have been simpler to use the LAN connector so the other PC online would not be a condition for its availability.

  (1) connect the printer with the LAN connector to your network switch or router and turn it on.

  (2) make sure that the IP address of the printer is your network subnet via the embedded Web server or printer print Panel menu.

  (3) set it up as a network on all PCs compuuter to make it available for use

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• WAP121 cannot reset to factory default settings

  Hi I reset my WAP121 with the reset button with a paper clip bent to more than 10 sconds. All lights will be turned off and then I release the button when the power led lights up. It's OK. But now I can relogon to my WAP121.

  I use the following user name and password.

  Username: cisco

  Password: cisco

  What's wrong?

  Model No.: WAP121

  Firmware version: 1.0.0.3

  PIP VID: WAP121-E-K9-V1

  Serial number: SER1601059L

  Best regards Andre

  Hello Andrew,.

  Normally in the Support Center when we try to put something else to plant, we will hold the reset for 30-35 seconds.

  Hope that helps.

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.