some clients of VM randomly showing that power off after restarting the agent of mgnt

Similar Questions

• My computer is stuck on the 3/3 update, and even if I force power off and restart, that just guard on that happening. What can I do?

  I run windows vista on my pc, and every time that I turn it on, it just sits on the 3/3 update and will not progress. Even when I force my PC to power off and restart it, it continues to be. The first time he tried this update, I have dropped about 3 hours and returned to the configuration to update: stage 3 of 3-0% screen. Since it always happens. My pc is unusable because of this. What can I do?

  .. .my computer came pre-installed with vista, so I do not have a disk

  Not that I recommend a repair install, but the manufacturer was required to provide a way to reinstall Windows. If the computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to reinstall Vista.

  Assuming that Vista SP2 is not installed, I recommend you open a free support incident, NIC. See the link in my previous answer. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  I used the 30 day trial on the (CC) photoshop and now I bought the app 1 month only downlowd the monkeys of lightroom and to show that I need to buy the CC, what to do?

  Disconnection of the step is mentioned in the link below:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Even after disconnection and signing in if you are still having the same issue, let us know if you use Windows or Mac computer?

  We will have to check once a Hosts file.

• Support the contact - person I'm trying to communicate with a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page to contact technical support is a labyrinth and continues to loop back to the sa

  I am trying to contact a person that I paid for my subscription to the CC and it is to show that I have not bought the product.  The page contact technical support is a labyrinth and continues to loop back to the same place without giving me any contact information! Help, please!

  Move the debate towards Adobe Creative cloud

  We have checked your account details, we see active participation of Photography Photoshop program.  Please make sure that you are connected with correct Adobe Id to Adobe.com to get it. You can check:Adobe Store | Order FAQ and your online payment

  To install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html, you can also Learn how to enable or disable Adobe applications from here.

  Kindly let us know in case you have further questions on your membership.

  I hope this helps.

• Photoshop and Lightroom shows that 'Try it' after I subscribe to Plan photography

  Photoshop and Lightroom shows that 'Try it' after I subscribe to Plan photography

  Go to Adobe Creative Cloud

  Hi Joey,

  Please check the help below document:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sheena

• I bought the student pack and my account shows that I still have on the free trial version

  Today I start paying the student creative cloud pack, when I try to update the new version, shows that I still have on the free trial version

  Log, activation, or connection errors. CS5.5 and later versions

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:

  The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  I have an AMD A10 processor

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• I receive my messages, it shows that there are 6 in the Inbox, but when I click to them, nothing appears. whenever I click, nothing is available to read.

  I hit get new mail from pop.gmail. It shows that there are new messages. but when I try to open the Inbox, nothing appears. So frustrating.

  Please make sure that your settings are correct Mozillazine: use Gmail with Thunderbird

  You can also try to click with the right button on the folder of emails and click Properties > General information > 'repair file '.

• I can't connect you on some client computers on a domain environment unless I have remove the network cable.

  I have almost five machines on my LAN that cannot log on to the domain, unless I have remove the network cable and then it connects.
  Please advise?

  On the domain controller or problems by communicating with the domain controller, when you remove the network cable, you connect with that caching of credentials.  Also look at the DNS settings on the RODC, the RODC DNS should point to itself, make sure that the machines are all on the same subnet.

  John

• HP Pavilion G6 - 2148TX Power Up after replacing the fan problem

  Hello

  After replacing the fan, I have a power issue with the laptop. Basically, the laptop will only fuel on the power cable disconnected to the motherboard. It is by mistake only after the fan has been replaced and everything got back together, I noticed that the battery was not charging.

  I then opened the machine and reconnected the power cable to the motherboard and nothing - no power.

  When connecting to the source of power with the battery in place, adjacent to the power supply lights in WHITE then remains ORANGE and will not. Seeing no other, no fan noise, nothing.

  If I remove the battery, the adjacent to the power supply led in WHITE and white rest however not feed either. Same agin, no LED, no fan noise, nothing.

  Now, I opened the machine upward and disconnected the power from the motherboard. Put it all back together and that the laptop starts as usual with the battery and it works very well. (Well until the battery runs in any case)

  I'm looking for some advice on what the issue could be given my conclusions.

  Thanks in advance.

  Well, I've now solved the problem. I bought the DC power cable that connects the motherboard to the socket on the laptop. $15 on eBay.

  Connecting the supply cable to the Jack of the laptop, the 'white' and is LED stayed on. The battery was not installed at the time. With a deep breath, I pressed the power button expecting anything to happen, but when he lit a big smile appeared on my face.

  The laptop booted up normally.

  I then install the battery and the battery indicator showed it to load. Everything is good and a son of 18 very happy. The fault was as expected according to my previous email. I hope this helps someone in the future, shame on HP response was off the mark in light of the original explanation and clarification post. But appreciated nonetheless.

• power off after freezing of the screen

  any help is appreciated greatly. while cleaning my closet dell b110, the screen froze, cursor movement lie, mousee light went out, ctrl alt esc, nothing helped, could turn off, so I killed the power. end waited 15 min, then powerded. things seemed ok loadup, but noticed the programs does not normally. I restored back to two days, but still not right. any suggestions?

  Content from another thread related to this topic:

  relitive to my question posted a few minutes ago, when I ran my cclearner, he won at 23% on cookies or the trash. really need help ;>)

  I can't understand how a clean boot will help you, but don't give the idea of 'expert' Microsoft Support engineer a shot if that's your desire.

  If that you have on your system without stop stop OK, sometimes this can cause corruption in the filesystem NT (NTFS).

  If it was me, I could run a check disk with error correction and see what it finds / corrections.  If there is nothing to do, then you have another problem, but I would start with this first.

  Click Start, run and enter in the box:

  Chkdsk /r

  Click OK and answer in the affirmative to the question about running chkdsk at the next system startup, and then restart the system and chkdsk runs.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  When chkdsk runs automatically restart, the results appear in the case where the watcher Application
  Newspaper.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Description:
  Checking file system on C:
  The type of the file system is NTFS.

  A disk check has been programmed.
  Windows will now check the disk.

  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  25151976 KB in 78653 files.
  48256 KB in 10264 index.
  0 KB in bad sectors.
  237080 KB in use by the system.
  65536 KB occupied by the log file.
  13632736 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  3408184 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  I prefer to run chkdsk /r from the XP Recovery Console so you can see what he does.

  You have a genuine XP bootable installation CD or you want to know how to make a bootable CD of XP (no XP media required) Recovery Console to run chkdsk /r from there?

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.