SP2 update problem

Similar Questions

• SP2 update problems. Blocked.

  Hello

  I am running Vista Ultimate SP1 and I need to upgrade to SP2. Here's the situation:

  • The update fails at the last minute (3/3 100%, decides so he cannot continue and returned.)
  • I don't know how to get a code error or log on the process.
  • I * fact * resize the partition and add a Win 7 to the PC. I use MS Boot Manager to decide which one to use. I use (obviously) especially 7 but I have software that only runs on Vista, so I need to use Vista.
  • This is a machine of dev there VS2008 and a number of tools on this subject.
  • I ran the "KB947821.
  • I disabled all the services package.
  • I have installed all the other important updates.

  I understand that it is now a product of low level, but I really want to get this to work without wiping the drive (as I have a few software locked node that will be difficult to reinstall.)

  Any suggestions?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista SP2 update causing CompactFlash new hardware detection repeated even after installation of the driver

  I have a footstool of m8100n HP Pavilion Windows Vista Home Premium.  Since the Vista SP2 which was installed yesterday through the update of Windows, my PC guard detection of new hardware when I registered.  The application popup never ask again once, ask later, or update/search recommended for software to install what is recommended.  After selecting the option recommended and install the software that it finds, I get a popup about CompactFlash is now detected and ready to use material.  After this exercise, looks all right.  However, every time I connect as administrator or standard user on my Windows Vista computer passes through the detection of the same material and the update.  He should not have to repeat this after installation and update of itself for the new hardware.  What is the cause and Microsoft is aware of this problem?

  I worked with HP on the problem.  It wasn't a problem of driver from the manufacturer because it had no software update HP.  The integrated CompactFlash drive location doesn't have a drive letter assigned.  Do not understand why that would be a problem because on the removable media drive letters are assigned dynamically when you insert a card or a player.  Records didn't have drive letters when running on SP1 and it wasn't and issues then.  This seems to have become a requirement for SP2.

  The fix was to go in Windows disk management and pre assign drive letters to the disks 1 to 4 that are for CompactFlash removable media, MS/MS-Pro, SD/MMC and SM/xD-Picture on my HP m8100n PC.  Once this has been done and that Windows detects new hardware because of the SP2 update drivers, it installs successfully and is no longer repeat the detection/installation process.

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Home Premium SP2 installation problems

  SP2 says its installed but Windows Update shows it as an available update. When I view the system information, it still shows only installed SP1. I tried the standalone install and I got error 0 X 80070564 connection failed. SP2 shows as has been properly installed on Windows updates the history but it shows also the lack of installation after 2-3 hours to install, restart, then back to sp1. I stop all AV, Spyware, adware, Windows Defender by other items on the SP2 installation problems. I also ran system preparation and the System File Checker. I am running Vista Home Premium 32 bit on computer laptop HP DV5 Dual Core. I have not found anything on the failure error connection displayed in the standalone sp2 update.

  Hello vinniegolf, welcome.

  I would recommend trying to create a new user account with administrative privlages and you try to upgrade to SP2 from here. This will tell us if it has something to do with the internal components of your user account.
  You can create an account via START > Control Panel > users
  Let us know what happens
  
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Vista Home Basic - 0xc0190005/12223/56066 SP2 update error code

  I have a Dell Inspiron 1545 under Vista Home when I get this message above. I have tried to reinstall office but impossible--tried all the options proposed - including the restoration and all reinstall them by disk Dell. Whenever he gets insofar as the error code and stops.

  How can I fix it?

  Hi MarkBrock,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Vista-Home-Basic-SP2-update-fails-error-code/48081348-0c94-473f-BAC9-f1e0f41a664b

  I hope this helps!

• Satellite C855 - 2M 1 - AMD graphics driver automatically update problems

  I have a Satellite C855 - 2M 1 and installed windows 8.1.

  I installed the first upgrade of the video driver from Windows update (WDDM 1.2 02/11/2013 9.12.8.0)
  and it works well.

  Lately on windows update has been released a new driver (Advanced Micro Devices, Inc. - Graphics)
  Adapter WDDM1.3 - AMD Radeon HD 7500/7600 Series)
  I tried to update the driver but when windows restarts it does not load the driver and restore the old.

  I tried to manually uninstall the driver and updated, but it fails.

  Any help on this would be much appreciated.

  Thank you
  Andy.

  Hello
  To be honest I m not very well why the autopilot GPU update could not complete successfully, but I guess that the update is not out for the AMD Radeon HD7610M, which is built into the laptop.

  I also read a discussion on this issue in the Microsoft forum, and it seems that there are other people having exactly the same problem with this update.

  [Advanced Micro Devices, Inc. - Graphics Adapter WDDM1.3 - AMD Radeon HD 7500/7600 series update problem | http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/problem-with-graphics-driver-update/a7a6da38-6575-405b-86c2-71a620be06b7]

  The question is therefore probably related to wrong or incompatible driver GPU

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Security update problem - trying to update from McAfee!

  try to install McAfee 2011 3 users Total Protection with installation CD.  After spending the last 4 hours online with them, they claim I have windows update problem - shows up in the history as: for.NETon of a security update windows XP, windows Server 2003, windows vista, windows 7, vista windows 2008... KB2160841.  Finally, they said that the problem of 'failure' to be fixed through windows before my McAfee can be updated? !!! Help!  already four hours online trying to fix! :(

  See Andre.Ziegler response to a previous post, involving the KB:

  Error: WindowsUpdate_00000002 when installing .NET Framework 4 (KB2160841)

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/07e67bc5-1841-4972-Bac4-7a1d81dba8e7

• Windows vista SP2 update failed twice

  error code 800F0816 - when the vista sp2 update is completed and the facilities, it goes in a restart, windows does not load and I get the error code after crossing the repair mode

  The error is related with component maintenance (EC).
  According to this list of common CBS errors:

  800F0816 - express package was not completely downloaded. The status of the operation was recorded while the package is downloaded. An express package is a package that you are installing by using Windows Update. With these packages, only the files needed for that specific computer are downloaded and installed (unlike when all is downloaded to a computer).
  There is no action required on your part, wait for the express package is downloaded.

  Alternatively, you can:

  (1) post this question on the forum Vista and Windows Server 2008 Service Pack 2 .
  2) Contact Ms. for * support for free * to get SP2 installed.
  (3) to download the full package standalone SP2, Save and then read this prior to installation:
  Learn how to install Windows Vista Service Pack 2 (SP2)

  All the foregoing does not mention it, suggests strongly that you be completely and totally turn off the installed
  Suite antivirus/security surveillance system or even uninstall it before you attempt the installation of SP2.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Update problems - how to prevent an update available

  title of the debtor: update problems

  On XP, I recently uninstalled .net because it was originally a slow race. The result is a much faster computer but update Downloader insists to send me, updated net what failure then to install. How can I stop sending me these updates?

  Hi, Alan.

  You can check the box indicating do not show this message and click Ok.

  http://www.YouTube.com/watch?v=TNPNOm_4RKs

  Word of warning however.  NetFramework is an application that depend on many other applications.  You may want to rethink and reinstall NetFramework.

  How to repair an installation existing.NET Framework

  You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged.

  http://support.Microsoft.com/kb/306160

  How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000 (NetFramework cleaning tool includes)

  http://support.Microsoft.com/kb/824643

• Update problem - cannot install KB982168 & KB2539631

  original title: update problem

  I keep having problems with update KB 982168 and KB2539631

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Note: KB982168 is an optional update, not security. Feel free to hide it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• Vista update problem, whenever I search updates, it tells me that I need those I supposedly already downloaded

  I recently had to reformat and now I try to do all my windows updates. But whenever I have to search for updates it tell me that I need those I supposedly already downloaded. I don't understand what is happening at all.

  http://PostImage.org/image/a5ivkjhmt/

  Try: troubleshoot common installation in Windows Update problems