Specifications of the network

Similar Questions

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• Technical specifications of the Satellite U400D

  Hello
  i've got new satellite U400D-204.
  I need to install Windows XP on it (please, not flamewar, why not use Vista or 7, or Linux), Toshiba does not support XP drivers.

  Can someone show me the technical specifications of U400D? I mean, what kind of wireless card is there, chipset, its subsystem etc... So I have to dig and hope - download the drivers from the Web sites of suppliers.

  Thank you very much, Marek

  Post edited by: bone_1

  Hello

  You can easily find the specifications of the material.
  Install the tool free for example Everest Home Edition. It scans your hardware components and provides many details
  Check it!

  However, I was able to find information about parts of the material:
  Graphics ATI Radeon (TM) HD 3200
  Atheros 802.11 wireless network card g
  Chip Conexant Sound
  Marvell LAN chip

  You can use the Conexant audio chip and the webcam software that has been published for different Toshiba notebooks, just to test it...

• Satellite A-C55-1N1 - upgrade of the network cards

  I have a Toshiba Satellite C55-A-1N1 running Windows 8.1 and want to update the NETWORK Ethernet card both cards Wi - Fi, with the upgrade of the most important Ethernet card.

  Current card Ethernet installed (by Device Manager) is Qualcomm Atheros AR8172/8176/8178 PCE - E Controller Fast Ethernet (NDIS 6 h 30). I would like to move to GigaBit Ethernet.

  I don't want to disassemble the laptop to determine the size of the current map before obtaining beforehand a replacement (to avoid repeated disassembly). Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if indeed this is possible?

  Map current WiFi installed (by Device Manager) is Qualcomm's Atheros AR956x wireless network adapter. I would like to be able to also connect at 5 GHz...

  As with the Ethernet card, I would get a compatible card before dismantling and would ask the same questions. I also understand that I would need 2 or 3 internal antennas to reach faster speeds of the WiFi. Can someone advise please on existing maps, maps of appropriate replacement and on the issue of the antennas.

  Thanks in advance for any help and advice.

  Due to specific design material update on laptops is very limited and supported. Support is upgrade RAM or HARD disk. It's nothing more than that.
  You can find a list of compatible RAM memory modules to upgrade. HDD or SSD upgrade is not problematic and, on most portable models, it can be done by the owner of the laptop.

  All the other hardware upgrades are not supported. I do not understand that you want to use the material with the best specification but that should help you with this?
  > Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if this is indeed possible?
  These info, you can get the laptop to the manufacturer or an authorized only, partner, but they will tell you the same thing I have already written.

  My advice to you: do not disassemble the laptop on your own. In a first time the valid warranty and secondly, you can damage something.

  At the end one, may be stupid, the question: what is the problem actually? Is your machine so slow or what? I mean in particular the LAN connection. It must be OK.

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• I can't connect a Flir camera to the network

  I have problems connecting to a security camera FLIR FX at the network.

  For your specific problem of FLIR FX, FLIR FX support should give you the best information on how to operate with your systemof their product .

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• A neighbor's wireless network is more powerful than mine, so my MacBookPro selects every time.  How can I eliminate the network of neighbour from the airport to the research?

  Wireless network from a neighbor is always "found" by my Airport first, then my MacBook links to it.  But I want to find my own network, of course.  Question: How can I remove this neighbor of the network function research network?  Is it still possible?  In other words, I want my laptop to ignore this network around when I wake up from my laptop.

  On your Mac laptop...

  Open the preferences system (gear on the dock icon)

  Open network

  Click WiFi on the left panel to select

  Click Advanced in the bottom right of the window

  Here you can see the list of networks that 'remembers' your laptop and connect to the network at the top of the list first.  If you want the laptop to connect to a specific network, click the network name to highlight, and then drag it to the top of the list.

  Now, click to highlight a network that you do not want your laptop to 'remember', then click on the - (less) button at the bottom of the list to remove the network. Do the same for other networks that you no longer need.

  Click OK at the bottom right of the window

  Click on apply in the next window that appears

  Close the windows and then restart your Mac.

• How to distinguish between couples that comes from my TX CAN oppose and frames which comes from the network?

  HY,

  I have an object can pass data to the specific id.

  I expect to get frame from the network with IDs and similar data.

  How will I know that the data came from the network?

  (If I listen to the data of the CAN Interface, I can't distinguish the data that I convey and between data from the Internet)

  Thanks in advance,

  Aviad

  Since you are using NI-CAN, series 1, which does not support no matter what Self-reception, I assume you are using two ports CAN... make your normal transmission and the other to listen to the frames of the CAN bus?

  If this is the case, the only option I see for you would be to compare the charge received with the load transmitted to detect the images you send. This will only work if you send and receive different payloads, but it's probably something that's generally true. If it is false, then you really have no good option with the 1 series (or even series 2) and NI-CAN.

  We have a different product, OR-XNET, which provides a forum for independent reception (such as series 2 NI-CAN), but when you receive the framework that it contains a flag that indicates if it was received from the network or received through self-reception. It's of course far easier (and probably only guaranteed) way to achieve your goal.

• HP Pavilion dv6910us can't find the network device driver

  My computer laptop specifications:

  Product name: dv6910us

  Product number: FE653UA #ABA

  My problem:

  Windows 7 32 bit does not have the network adapter network driver.

  I tried to connect online network Port RJ45, flickered light in this RJ45 port, it is good work.

  --------------

  Could find you out for me, the network on the laptop HP Pavilion dv6910us driver? You can find the network driver to aid for all Version of Vista or Win 7 operating system 32 and 64-bit.

  Thanks for the help!

  Huy, LD

  Hello:

  This driver should install the wired ethernet adapter.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2093&Product=3740556&sw_lang=

• Programmatic checking for the presence of sbRIO in the network

  Hello

  I am looking for guidance (example code maybe?) to perform the following tasks programmatically:

  -check the presence of sbRIO target in the network

  -If so, connect with target & deploy the shared library Variable hosted in my Windows PC

  -If not, delete connection errors and make sure that SVs are not deployed (or cancel the deployment if necessary)

  The application must be able to continue with operation "No. HW" If sbRIO is not detected. My fight is how to check the presence of RT HW in the network and how cancel the deployment of the SVs and so no error is reported and the app can proceed free of charge with the simulation code.

  Thank you!

  Jorge

  Hello jorgeinSD,

  I would recommend that you take a look at the range of available in the Palette of LabVIEW Real-time System Configuration. Specifically the Find.VI looks like it is exactly what you want to use to detect the sbRIO is available on the network. This VI is can be found at the following location

  Real-time > utility RT > System Configuration > Find.VI (systems)

  This VI will return a list of all systems on the network. From there, you also use other utilities available in the palette of the Configuration of the system.

  See you soon,.

  Joel

• Host on the network is busy

  I have a whole new Photosmart D110. Wireless seems to install properly, printer is visible on the network, install from the disk of the factory driver. I'm on a MacBook OSX 10.5.8

  I can see the printer through the web, and utlity HP pages toner levels, etc. But I cannot print a page and can not print a test page. I get the error 'HP7433EE' host network is busy. retries in xx seconds...

  I printed files from using e-mail to web functionality but can't make it work wireless. What can I do?

  I just had this same problem. Actually I had mine hooked rugs for a coupla' years, then he started does not print and display this message in the queue.

  Here is how I fixed it:

  -I took the suggestion to go to Sys Pref pref. / printer, right click on the printer and select "reset the printing system.  He will wipe away all of your printers, you'll then need to reinstall.

  -My printer is connected to my wireless network and has a static IP address. As part of the "Add a printer" dialog, I select 'IP' and 'Protocol', I chose "HP Jetdirect taken."  And then I made sure to select the specific HP driver for my model, instead of using the generic driver.

  Before, when I had wiped my printers, I chose 'PPI' under the 'Protocol '.  I don't know what caused this to panic all of a sudden, but that's what fixed it for me.  Good luck!

  Juliana

• Why convert? What is the advantage? Why convert it before you send the data over the network?

  Hello everyone.

  I have a question quite simple and intuitive. Yet Google does not seam to get the answer.

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  I've been curious about this for a while and have yet to find an answer. Any help is appreciated.

  Thank you
  Taylor S. Amarel

  tsa256 wrote:

  Basically, I'm curious why should we catalogued something? It seems to me that it's just a little like a "band-aid" for editing data in conversion to a new data type, when it is not properly declared with an appropriate data type. What would be the advantage of this?

  It really depends on the specific situations.

  For example, some functions explicitly require certain types of data as inputs if they are not polymorphic.

  This means that if you do not convert the data yourself and you will see a red dot forced LabVIEW will do it for you.

  As to why the data was not the correct data type in the first place, it is sometimes inevitable.

  A few examples

  -What happens if you just read a text file as a long string.

  If there is digital data in this file, you need to analyze, and then convert it to a usable type (int, sgl, dbl, etc.)

  -you are given a 3rd part VI, dll, etc. that returns a numeric value as a double, but you need the value to I8.

  You cannot change the output of the function given to you, so what you can do to remedy this situation is cataloged data.

  tsa256 wrote:

  Furthermore, I see a lot of data type casting to U8 programs before sending it over the network. Various reviews say it's for speed, but I can't understand how it improves speed. The same amount of data is still sent, just in a different type of data. This is overcoming a limitation of the network. The network somehow send smaller data types faster?

  Somehow, this is my first response, but in a more general sense.

  Many functions down to the level of the OS run in binary.

  If your data are not already in binary, the sending computer must convert it to binary, and then send it, have the receiving computer convert in return.

  Two conversions on each side of the transmission add unnecessary delays.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• Make the computer Visible on the network

  I have several computers connected to my router.  Some wireless, some by ethernet.  One of the computers is an old WinXP machine, the others are all either Vista or Win7. (BTW the XP computer connects with ethernet

  1. The XP computer can "see" all the others available in network connection
  2. All new Vista & Win7 machines can 'see' each other
  3. None of the latest you can 'see' the XP computer as available for a connection

  I guess I have to change something in the XP computer to make it visible to others.

  Any suggestions?

  gsnu201101

  Hello

  It see all availble devices that are configured for Sharew on the network.

  -----------------

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET