Portege R500 - Vista does not SP1 using windows update

Similar Questions

• Portege R500 - Touchpad does not scroll after Windows 7 upgrade

  Hello!! Happy new year!!

  I got a great Christmas present, an upgrade to windows 7, so I upgraded the operating system of my Portege R500 of Bussiness from Vista to Windows 7 Home Premium. Up here, the performance of the laptop has improved BUT the touchpad is not working properly and with correctly I mean that scrolling is not working more. I checked toshiba Web page downloads and there is no driver for the touchpad for windows 7. Is that what I can do to back the scroll function to work or is it just a matter of patience

  Thanks in advance for the help
  See you soon

  If you are certain that there is no driver Toshiba and is your Synaptics touchpad then try their drivers for Windows 7 [http://www.synaptics.com/support/drivers/]

• Windows Vista does not start after Windows update

  I am running windows vista on a PC laptop toshiba l300.  He did an automatic update of windows and this morning when I turn it on it will not load.  It comes with a screen saying download of updates please do not turn off your computer.  then, he turns his car on and keeps recycling through the same thing.

  I tried loading in safe mode, but it does the same thing in that. I also tried selecting the option, the last load charge effective network via the F8 key but again that has not worked.    I have not all disks with the laptop, so I don't have a vista disc.

  I'm not very computer and have done everything I can think off.

  can someone point me in the right directioin.

  I working on my main pc at this time and did the updates of windows to be sure it's XP

  Janhsmn,

  If you do not want to install updates on your computer, you can select the "Hide" option and it will ignore them in the future and continue with other updates. Do not forget that the reason why the updates could be the cause of this problem would be because as a conflict with a third-party software. And most likely will not affect both your systems in the same way unless you have the same third party software installed on all your machines.

  To hide the update in Windows Vista, please follow the steps below.
  1. click on 'start '.
  2. Type "Windows Update" and press on "Enter"(on the keyboard) ".
  3. Select "Search for updates"
  4. Select "View available updates"
  5 right-click the update that is causing the problem and select "hide update"

  Please let us know if you need more help.

  Thank you, Carlos
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege R500 - Touchpad does not work on Windows 7

  I installed Windows 7 Ultimate, but cannot get the touchpad to work.

  Any suggestions for a fix?

  Post edited by: adeery

  Hello

  Have you tested an external mouse on the laptop? It work?
  The touchpad is listed in Device Manager?

  Normally, you can enable or disable the touchpad through FN + F9. Did you check that?
  You may need to install the package of value added for this.

• The cutting tool does not work after windows updates.

  I read answers to similar questions about the failure of the cutting tool.  I use the tool cutting regularly and I think it's a fantastic tool in Windows. I have Vista Ultimate and all my windows updates have managed: none were not installed correctly, and I did not install new programs or hardware.  It seems that Microsoft knows the snipping tool does not - why can't they simply provide an update patch to correct the problem, rather than make us do all the work.  I don't have to go through hoops of restorations etc to get something it seems work was broken by updates.  I'm about to go to a Mac.

  It worked for me! Thank you!

• Portege M800 - Touchpad does not properly on Windows 7

  Hello

  In windows 7 the touchad does not work properly, which means I can't scroll pages by dragging my finger on the edges of the touchpad. It worked perfectly witn Vista and now it isn't. I have the 64 bit version.

  I tried new drivers, but there aren't any. How should I solve this?

  Thank you

  Hey Buddy,

  You have the most recent driver for the touchpad? Usually the Vista drivers also work on Windows 7.
  Check this box!

  In addition, the exact model number would be interesting.

• Halo 2 for Windows Vista does not work on windows 7 32-bit computer

  Recently I have windows 7 installed on my computer and I installed Halo 2 for Windows Vista on this subject. I start the game, but before that I get a lot, it stops and I get a box that says Halo 2 has stopped playing for some reason any. He is looking for a solution and comes up saying that it does not find a waiting for Microsoft to find a. It happens the same thing every time.

  It seems that everything I needed an update. I went and did the updates and then began the game as administrator and it works fine now. I appreciate the help, though, and I don't know that your tips will help someone else as well. Thank you.  PS My game doesn't have the compatibility mode on it. Everything else is good. What is happening with this?

  Thank you all. Bubba

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• Acer Aspire 5720Z with Windows Vista does not start in Windows

  Hi, I had an Acer Aspire 5720Z who begins to give me the infamous error at startup, which brings you to the display of the Startup Repair tool.  When it ends, a pop-up window message saying "Startup can not repair this computer automatically" happens.  I tried all the options in the Windows Vista environment, but at the end he continues to display the same message and startup windows repair cycles over and over again.  And I'm unable to restore, because there is no restore point created.  However, I could get details of the problem and we hope that this information, someone here can direct me to what I do, since all the data of the disk are there, it's just that here I have a kind of corruption of the file to be replaced.  Here is the analytical error:

  Signature of the problem

  Problem event name: Startup Repair V2

  Prob. GIS. 01: Autofailover

  Prob. GIS. 02: 6.0.6000.16386.6.0.6001.18000

  Prob. GIS. 03:6

  Prob. GIS. 04:1048592

  Prob. GIS. 05: Corruptfile

  Prob. GIS. 06: Corruptfile

  Prob. TR. 07: 3221226017

  Prob. GIS. 08:3

  Prob. GIS. 09: WrpRepair

  Prob. GIS. 10:10

  OS version: 6.0.6000.2.0.0.256.1

  Locale ID: 1033

  Hope someone out there can guide to say which file I need to replace in order to restore this laptop.  I hate having to reformat for this little problem, since all the files are there.

  Thanks for your help and assistance.

  luiso16

  I thought someone here would have developed an idea for you on this error to fix it now.

  You can try this:

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Speco DVR8TL250 does not connect using Windows 7.

  I have a Speco DVR8TL250 that I can access it remotely using Windows XP and Windows Vista computers. I'm unable to access the recorder using Windows 7.

  Any help would be greatly appreciated.

  Hi dbad_dgood,

  Welcome to the Microsoft Answers Forum!

  ·         Please provide us with the exact error message or the error code that you receive when you try to connect the 8TL250 DVR?

  ·         The device is getting detected in Device Manager?

  To check if the device is detected in Device Manager, do the following:

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  According to my research, the device is not compatible with Windows 7. You can check out the link below and check if the device is compatible with the version of the operating system installed on your computer: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  You try to install the drivers in compatibility mode. Steps to follow:

  i. right click on the driver

  II. click Properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  If the problem persists, you should contact the manufacturer of the driver, because there is no upgrade or patch for Windows 7.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why not Winemaker Extraordinaire who worked on Vista, does not work on Windows 7?

  The game installs, but when I click on play, I get messages from the incompatibility. The game is supposed to play in windows 7.

  Remove cutscenes to content in the active folder, but do not delete the folder and it will work fine this error is caused by versions more recent flash does not work with some of the old games :)

• Creative cloud installer does not work - using windows 8

  Installer of creative cloud keeps ending abruptly without error message. I use Windows 8. It's a new PC and I just installed about 8 other apps. It's just what's wrong. Please hep.

  Hello Yvette,.

  Please refer to the threads below where similar problem was addressed:

  Re: Install Creative Cloud Desktop Windows Explorer crashes and hangs

  Installation of Adobe Creative Cloud crashes at launch

  Kind regards

  Sheena

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Laptop HP - 15-r213ns: hotkeys (keys of wifi sound, brightness), does not work after windows update

  Hello

  I have a HP laptop - 15-r213ns (ENERGY STAR) with windows 8.1

  Last night, after an update of windows, the shortcut of the brightness (F2 and F3) volume (F7 and F8), wifi (F12) and keys all others have stopped working.  I can always change the brightness and volume using windows, but I can't do more using the keys.

  The function keys are working, as refresh F5 or F3 Browse. I noticed that before I had to press the FN key for this and now she does without the FN + Fx, so I guess that the update of windows must have changed something here.

  They used to work fine before the update. I reinstalled the display drivers (NVIDIA G-FORCE 820 - M) and looked for new drivers or update drivers using HP Support Assistant, but everything is up-to-date.

  I was looking for hot key factors in the page of HP drivers for my product but could not find any keyboard, drivers or software related shortcut keys.

  any suggestions?

  Thanks in advance,

  Marco

  Hi, Marco:

  The system of the event utility is supposed to get the Fn keys to work.

  Details:

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  You can find this file in the Software - Solutions section of the driver for your model page.