Split: Error Code 800704242 - smiling Beav

Similar Questions

• Error code 800704242

  Hello

  Any progress with update error 80070424? I got it for a few weeks now with exactly the same mistakes as shown on this forum, i.e. sfc/scannow 'Protection resources Windows could not start repair service' running from a high command - same prompt repair of console Vista, etc. coming with the error.

  I have tried all the following suggested solutions under the direction of Microsoft EMEA Consumer Technical Support:
   
  1. stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
  a. click on start / all programs/accessories. Right-click "Command Prompt" and select "run as Administrator". Click on 'Continue' in the UAC prompt.
  b. at the command prompt, type the following commands and press ENTER after each command:

  net stop wuauserv
  net stop bits

  2. rename the folder "Catroot2. To do this, follow these steps:

  Type the following commands and press ENTER after each command.

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
   
  3 Rename the folder "C:\Windows\SoftwareDistribution":

  Type the following command and press ENTER.

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  4. save the files used by Windows Update and Microsoft Update. To do this, follow these steps:

  a. at the command prompt, type the following commands, press ENTER after each command and then click OK every time that you receive a verification message:
   
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wucltux.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuwebv.dll
   
  5. start the Service the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:

  a. at the command prompt, type the following commands and press ENTER after each command:
   
  net start bits
  net start wuauserv
  net start Eventlog
  output

  Unfortunately, this failed and resulted in the following Microsoft email:

  Reference number of the dispute: 1085420191

   

  Hello Andrew,

   

  Thank you for your response.

   

  Given that we have done some troubleshooting steps and it still doesn't work do not the updates manually, there could be some files of the System corrupt operations that might be preventing us to launch the updates.

   

   

  Your best option for this particular question here would be to contact the main helpless Microsoft: 0870 6010 100 (opening hours: Monday - Friday 08:00 - 18:00)

  and ask for the support of Windows Vista, and I'm sure they would be in a much better position to help you with your problem.

   

  I apologize for not being able to help you with this issue, because it is out of my 'Expertise'.

   

  I'm sure you understand that it is a question out of my range of support.

   

  I closed this matter for the moment as unresolved.

   

  Kind regards

  Rosemary.

  Support Services Microsoft technical

  Unfortunately, support for Windows Vista won't help me because I have an OS preinstalled (by HP that have also drawn a white) and since I don't have the Vista install I can not do a repair installation DVD. I've only had this PC for about four months, my first with Vista Home Premium 64-bit and ended about all my stuff on it from loading. The last thing I want to do is a complete system restore!

  Can anyone help please?

  Kind regards

  Andrew

  Have Andrew you tried to reinstall the Windows Update Agent?
  Try:

  <><><><><><><><><><><><><><>

  Repair / update Windows Update agent:

  1. determine if you are running a 64-bit or 32-bit system:

  Click Start-> right click computer-> select Properties

  In the window system, under System Type: it will show you the operating system 32-bit or 64-bit.

  2. download the appropriate version of Windows Update Agent:

  Windows Vista (32-bit)

  http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x86.exe

  Windows Vista (64-bit)

  http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x64.exe

  Make sure that you save the file on your desktop.

  Right click on the file of the Windows Update Agent and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue. In the installation window, click, read the license terms, select I agree and click Next, the successful installation click Finish.

  ---------------------------------------------

  If you receive a message WUA already installed, then perform these steps to force the WUA installation:

  Click Start-> click on all programs-> on accessories-> click Run, type the following in the open air filed:

  %UserProfile%\Desktop\windowsupdateagent30-x86.exe /wuforce

  Click OK. If you are prompted for an administrator password or a confirmation, type your password or click on continue. In the installation window, click, read the license terms, select I agree and click Next, the successful installation click Finish.

  ---------------------------------------------

  Test Windows Update (click Start-> all programs click-> click on Windows Update).

  <><><><><><><><><><><><><><>

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Outlook Express 550 5.0.0 error code.

  Outlook Express, when I send the attachment voluminous few people I get the error code 550 5.0.0. Quota exceeded when writing, cannot create output only to a person, the rest of them get OK. What's this problem on my end, or on the other side?
  Do you have any suggestions how to fix this would be appreciated!
  George

  If you get a message from the demon, then its likely to their end.  You can do a CTRL-F3 on the message of demon and see if it contains more information in terms of what generated server.  You can always try to split apart the message and see if she gets then.

  see you soon,

  Steve

• I have an error code Stop 0 x 00000050 on a blue screen when I turn on my pc and there is nothing I can do.

  Hi I was using my computer and I went to a Web site. It is then loaded something that resembled the command prompt. It came then with a blue screen. I had these before, but after restarting my laptop everything worked normally again. When I turned it back on, he asked what I want to do e.g. start in safe mode. I tried all the and he arrives with windows at the loading screen for a split second and then returns to the blue screen. Everything I try just brings back me to the blue screen. I still have the disks that came with my laptop I f it's any help. Its xp edition and home.

  aaron1122,
  Well, it sounds as if you might have picked up a virus (possibly).  I hope you have your data backed up.  If you see a real error code then after return what it is.  I'll try to get back to you if possible (it seems all MVPS and people intelligent people are hanging out in Win7 and Vista forums-XP is kind of old).  But hey there are some of go us around. :)   If you do not see the error msg, then on the boot selection screen select the option for 'Stop on error' (I can't think the real verbage but it's something like that).  Then you can get an error code.  If you get any errors, make sure that you have tried the steps in this thread: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e
  Then if you can boot into safe mode with command prompt and run "sfc/scannow" you will need the XP disc for this.

  If all else fails or you just want to get on the fast track, you can use your recovery disk and do a factory restore.  (Most of the time) will delete everything on your PC and update you 1.  If you go this route, make sure to get antivirus and backup of your data in the future.

  Hope this helps. QQ learn manage!

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• I received a 800F0922 error code when I try to install Windows Update.

  No help for me looking for error 800F0922

  Split from: http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_update/i-receive-an-error-code-800f0922-when-i-try-to/1398e178-c421-40e5-ad03-e890cdf2cdf9

  Hi Glenn,.

  Reset the Windows Update components, restart the computer and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 &amp; 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.

• Transcend Jet 360 Lite SD care &amp; "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Error code: sec_error_ocsp_unauthorized_request

  I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

  An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

  I tried to clear all - cache, cookies, history, blah blah blah

  I am so bored of you people cost me more time.

  It's fine in IE and Chrome.

  If I didn't need Firebug, I would switch to Chrome right now.

  edited because of the language according to the rules-forum-guidelines

  You're right, it is not sensible.

  Never made an exception for the site.

  FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

  Thank you for the help, sorry for the earlier rant.

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support