no boot device message

Similar Questions

• NB200-10Z does not start - slect boot device message

  Hello, sorry for my English, I'm Italian and I have him translated by the translator.
  I am writing because I have a big problem.

  My toshiba NB200-10Z has this break: I turn it on and I get the "Toshiba innovation leader" screen and bottom left shows «crazy (F2) Setup, press (F12) to the boot device selection menu...»

  No matter what button I press him, and still nothing happens. I tried to replace diskbench hard ram, but nothing does not change.
  I don't know what to do.

  I am very worried. Can you help me?

  Thank you to tell me everything

  Dino, Rimini Italy

  Usually, the message appears because the laptop could not boot boot device...
  In most cases the disk HARD is not found in BIOS due to the fault and therefore the laptop not found system.

  Question: are you able to access the BIOS F2 key?
  If so, the HARD drive is listed in the BIOS?

  You can boot from another bootable media such as disk or a USB key?

• No boot device message on my laptop satellite

  I get the message "no boot device - please reboot"; What does that mean? The laptop is only a year and primer not. I also tried a bootable DVD, and it does not start either!

  Help, please.

  To be honest I don't understand the situation.
  What model of laptop do you have?
  What operating system do you use?
  What do you do exactly?
  > The laptop is only a year and primer not
  What do you mean with primer not?

  Please provide some additional info and explain the situation with more useful details.

• No boot device message on my Satellite P850 - 30 p

  my laptop model is: SATELLITE P850 - 30 p

  When I turn on my laptop, it displays the text something very similar as following:

  "Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8101E/8102E PCI - E Ethernet Controller v.105 (071227)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM
  No boot device - insert boot disk and press any key ".

  I read that I should try to get into the bios, however, I can't get into the bios. I tried del, esc, f2, f12 (key by default to get into the bios for my laptop) I also tried Fn f2, f12 Fn. None works.

  I have tried syndicated harddrive th and th repeat same tests as indicated above, can always not in the bios.

  I have also tried to take out the battery and press the Start button for 30 seconds and replace the battery. still no luck.

  I also tried to plug in my external hard drive via the port usb but stillthE same messages.

  Could someone please help?

  The F2 key is good!
  You have to press F2 to turn on/off the device!

  As mentioned by BobRock; Press several times on the line!

  In some cases, you will need to press the INS, then F2 to access the BIOS. This is required for some units when supervisor password has been set.

  By the way: PXE - E61: Media test failure, check cable message appears because the laptop has attempted to boot from LAN. This usually happens in the case where the HARD disk cannot be found. Mainly because of HARD drive hardware problem

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• The screen message: not found boot device

  I get the following message on my HP Pavilion dv5-1200: "not found boot device. Please install an operating system on your hard drive. Hard drive (3FO) '. Can anyone advise, please.

  I give it a go without having too much hope that it will work. Once again thanks a lot or your valuable support.
  Rabia

• Satellite C660: message: reboots and select good boot device

  Hello

  I dropped the laptop today literally a few inches from the ground, it slipped from my hand as I was placing it on the ground. He fell flat.

  Now I see the message "reboot and select proper boot device."

  I tried a few different options that I read, and I see the HARD drive in the BIOS F2 thing or whatever it is called. If it is recognized, but I can't seem to move in the message. Any suggestions?

  Thanks in advance.

  PS I will need clear instructions, I'm not stupid, but I need to explain. I don't understand some of the pieces.

  Thank you

  Hello

  I think that your HARD drive is bad.
  I think that you have not checked it correctly in the BIOS.

  Please go to BIOS once more, by pressing F2.
  Now on the first page, you will see date, time, details of CD/DVD drive and you should also see the details of the disk (size, name)
  You see that?

  Otherwise, the HARD disk is not initialized by the BIOS and this means that, because of the fall, the HARD disk has been damaged.

• no boot device found message after that finishing recovery disks and restart...

  I recently bought a new Wester Digital hard drive my laptop HP provided with is death/failed, but now I have no found boot device / error message even after complete installation floppies and disk 4 is ejected.  He did the whole insert the disc 1, 2, 3 and 4, and he went to 100%, then said to remove recovery media and press on continue, so that he can restart and complete the process, but it just reboots the computer, gets the no boot message device and stays there.  There's too much during the night and still the same message.  After disc 4 finished what she also said not to touch anything or do something, so I did everything, he said to do.  The hard drive is new, as I said, and is the same 500 GB which was the one I replaced.  The recovery disc were not created by me, they came with my laptop when I bought from futureshop in late October 2010.  It is out of warranty too, that's why I'm looking for a solution...

  Any help would be welcome...

  I did something else I looked and everything got up and running, so it's all good now.

• White screen then the message ' selected boot device has failed.

  After a normal shutdown last night, that my cell phone went straight to a white screen on back when I turned on.

  I tried to plug and unplug, take out the battery and connecting it to a TV with a HDMI which did not pick up anything.

  After turning off the power on and off several times, there is now a white dash in the upper left.

  I let him down for about 20 minutes before a message saying "the selected boot device is a, press ENTER to continue" that turns off the computer.

  I had the computer 4 days if shouldn't them be anything malfunction already.

  Any help would be appreciated!

  GabbyBlag

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on startup problems and wanted to help.

  You should not have problems with a PC this new.
  
  My suggestion is that you contact the HP customer support to see about maintenance and options at your disposal under warranty replacement.  If HP is unable to repair it, then you should be able to insist on a replacement - no charge!
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• When I re-startup I get a message "no available boot device - HDD internal.

  Original title: start the problem.

  Recently, my computer hangs in.  Sometimes, when I re-startup I get a message "no available boot device - HDD internal. Can someone tell me what this means? (Doesn't look good!)

  This probably (should) means that your hard drive is dying

  Try this if you can initialize

• I get the message "No. Boot Device Detected" in Vista

  I changed the battery in Dell Dimension e521 my mother.  Then when booting I get the message "No boot device found". I can continue and boot from the CD.  I tried to Dothe StartRepair bt he indicated there is no problems.  How can I fant6mes the startup problem?

  Hello

  Installation/configuration (BIOS/CMOS) often F2 as you boot then watch the screen - make sure that the hard drive is set
  first of all in the boot order.

  Check with Support from Dell, their online documentation, diagnosis and ask in their forums on any
  known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.