Stage of CS5 symbol Flash stuck in the upper left

Similar Questions

• My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse.

  My iMac cursor is stuck in the upper left corner of the login screen and I can't move it and now I can't use my iMac. What can I do? My iMac is a 27-inch 2014 release (one thin without retina display) and uses the keyboard and wireless mouse. It runs OSX Mountain Lion (not sure which version) and is a model 27 inches.

  have you tried to change the batteries in the mouse?

• Black screen with flashing '_' in the upper left corner.

  Im running Vista 64-bit Home Premium and recently ran chckdisk because the computer found some "bad sectors" and prompted me to run. After reboot, the computer loads the image in which I can press "delete" to enter the bios (which I do), then press "tab" to go to the post OFFICE (which has no effect and always load the black screen with a '_' blinking at the top left. If I do nothing, the black screen with the '_' blinking always appears after the image. I can't start in safe mode or access the "Advanced Boot Options". The only thing I can do after the black screen is press "ctrl alt del" in which the same process begins.

  I bought my computer from online retailer so it did not come with any CD to restore/recover...

  Hello

  1. did you of recent changes to the system?

  Check her unplug all devices external (except keyboard and mouse) and if you are able to boot.

  If this isn't the case, I suggest you contact the manufacturer or retailer for a Windows Vista Installation DVD.

  Once you have the DVD you can try to perform the Startup Repair.

  Method 1: Run a startup repair.

  (a) Insert the disc.

  (b) restart your computer using the power button on the computer.

  (c) If you are prompted, press any key to start Windows from the installation disc.

  (d) If your computer is not configured to boot from a CD/DVD, check the documentation that came with your computer. You may need to change your computer's BIOS settings.

  (e) choose your language settings, and then click Next.

  (f) If you are using the Windows installation disc, click Startup Repair. (g) click ok when you are prompted.   Follow the steps in the link to perform a startup repair. http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope his helps.

• I have the virus of file recovery, now I have a black screen with cursor blinking in the upper left corner.

  I have a Pavilion Notebook and recently caught the virus from file recovery.  I bought and ran the disc of Trend Micro Titanium Maximum Security.  Now, I get a black screen with a flashing cursor in the upper left corner of the screen.  All tests ran for memory, hard disk, etc. are OK.  Now I have a recovery disk, but have not backed up my files.  Any suggestions?

  Download your backed up files, then you can boot from your recovery disks to reinstall Windows.Several options to do so.

  Remove the hard drive and attach it to one > USB adapter . Plug it into another computer via usb port and copy files off the power.

  You can use > Ubuntu Live CD to boot from and backup files.

  OR ->Kaspersky CD has the ability to back up files.

• TX2-1020us digitizer cursor gets stuck 1cmx1cm of the upper left corner

  I have a tx2-1020us

  Sometimes, the stylus cursor takes over and gets stuck about 1cmx1cm from the upper left corner of the screen if the screen is 90 degrees or to move away it from the keyboard when you use it as a laptop. If less than 90 degrees, when this happens, it's somewhat usable but the slider still jumps at the skylight at random.

  I've known as a locking of the keyboard once but removing the power and the battery it is resolved.

  To troubleshoot, I ran the HP and N-trig utilities and they found no problem so even the question that happens. I downloaded the latest drivers from this site and install, I searched on Google and Asus seems to have a similar problem but I don't know if this applies. Sometimes, when I reboot it goes far, other times it is not. Deactivation of the first N-Trig driver stop the question but then of course, do not work the key features.

  I installed the software (for most, MS Office, Corel PSP and NeatWorks) and installed a scanner NeatWorks and GPS MS on it since I bought it last Friday (not connected when it is the case).

  Has anyone else seen this, they are of a resolution, I would stay before 15 days runs out?

  Problem solved!
  
  Turns, I have a desk lamp fluorescent light about 15 cm from the laptop.
  
  When the lamp is on and the laptop is plugged in, it does the cursor thing erased. Unplug the laptop or move the lamp 25cm and everything works perfectly. Go figure.

• T61 symbol of padlock in the top left corner? No access to anything.

  Well if I had a fan error I took the laptop part to clean the fan it worked "I think" a lock now appears in the upper left corner with another symbol next to it that looks like a computer but its so small I can't tell if it is there anyway to work around this problem if not so it is not my job is at stake and with this economy , according to me, I could just jump off a bridge after talking with my psychiatrist of course I changed my mine... Any ideas email me as soon as POSSIBLE! I have no time to watse. So let me tell you what I tried I tried the ESC key after the start to different choice of start and and I also tried F8 I tried F12... idk why and I tried the "Fn" key with the symbol of locking on my keybooard to see what who would do that I don't know what else to do with just another hard drive " , 2 (2 GB, 1 GB) of ram and the tools to disassemble the laptop. I would be so happy to know that I won't have to spend money on this machine cuz I'm in the negetives here, barely alive... help me or im outta the image for good, to be honest this laptop is my life and it has everything I need on it to succeed in the near future as well as many costly programs that could make or break me. Jeez im desperate that right now this is, I googled until I was going to pick up this desktop computer to this library and smash it and walk out like nothing happened even.

  Just to let you know, there is no way to remove a password from the bios, the motherboard would need to be replaced if you do not have the password.

  Discussions on hacking or other methods of bypassing this security feature are not allowed in the forum.

• Help with rotation symbol and address at the top left

  I want to be able to turn a symbol on the center of my choice (or even the center of the image/symbol), but retain the upper left corner as 0,0. Is this possible? It seems that I may have only one or the other.

  My project is an image (inside a MovieClip symbol) which moves and rotates according to the direction of travel. Only problem, it's funny. And then when I Center/adjust the rotation of the image inside the symbol, its origin is no longer in the same place, and I have to give additional numbers to compensate for. I guess the reticle is (0,0) as well as the central point or rotation. I'm fine with this being (0,0), but how can I move the rotation/pivot also point? I tried to use the free transform tool to move the white dot in the Center, but little success.

  Any tips? Thank you!

  AFAIK, you must choose one or the other.  If centered rotation is important, then Center your 0,0 and use the compensation values if you need to locate the top-left corner moving ever.

  I don't know if the loading of the moiveclip in an empty movieclip can offer a solution that you want to or not.  You can rotate the movieclip centered inside and use the movieclip containing the x / values there.  It might be interesting to play with and see what happens.

• I installed firefox 16 and when it happens my whole screen turns a reddish color and nothing appears that firefox symbol in the upper left corner.

  I have always used firefox. Two days ago, when I opened it, my screen becomes reddish and the firefox emblem is in the upper left corner and nothing else is on the screen--no text, no command, nothing. I uninstalled and installed again, same thing. Help!

  Thanks for the suggestions, but on the contrary, I restored my system to 2 days when everything worked correctly. It's all working now. The only great thing that has happened in these two days was a Java Update installation. I wonder if this has a conflict with Firefox. I have not applied this update of Java at that time.

• SQL DEVELOPER DATA MODELER tables seem to be read-only and make it a symbol of the string in the upper left corner

  I have a lot of tables in my data model.  I have three relational models defined in this file.  In one of the models, all tables seem to be read-only.  They all have a string in the upper left corner of the box.

  I use version control, so that are not archived or something like that.

  How to unlock these items?  Why they seem to be locked?

  Thank you

  Must not have been involuntary - you should have physically moved and dropped the tables/entities from one model to the other.

  If you want to copy them and be able to change in the future, use instead of copy / paste.

• OFF Auto placing the image in the upper left corner of the scene

  Can someone help, I'm a logo on the stage using a load button, the command is
  
  I managed to call in an image in the folder of the image using a button, but it is placed in the upper left corner.
  
  1 button using:
  on (release) {}
  loadMovie ("images\\logo1.jpg", 1);
  unloadMovieNum (2)
  }
  
  I want to make sure that when I press the button using the ACE over the image is at the center of the screen
  the stage size is 800 x 600
  
  ANY IDEAS GUYS

  Flash will put any new content loaded in the upper left corner, the point (0,0), if you do not give a location. The simplest solution is to use a movieClip.

  1. create a new movieClip in the library. Don't give him any content.
  2. drag an instance of this empty movieClip on the stage at the location where you want the content loaded to show.
  3. This movieClip instance name empty.
  ("4 load in new content to this clip: clipName.loadMovie("images\\logo1.jpg ");
  5 adjust the position of the empty clip on the stage as needed.

• After FlashPlayer 11.04, a site with videos, like YOUTUBE opens a separate process and videos appear in the upper left corner and cannot be moved.

  After update to a version after FlashPlayer 11.02 when you open a window with flash videos on, next to the Firefox process in the taskbar appears a new process with the Flash Player icon and the video window is placed in the upper left corner and cannot be moved. If there is more a video on this page when you click on that Flash Player icon, you can see a list of all the videos.

  Using Flash Player 11.02 this problem does not occur and I used this solution for quite awhile, but now, if I use this version, I get a black window with an error message on security reasons, but if I click on it it plays without any problems. Although in a few Web sites that require Flash, he says he needs at least version 10, but I 11.02 but does not recognize it and ask to be upgraded.

  It's very weird because that doesn't happen in my laptop, I have a desktop computer with the exact same windows and version Firefx and this happens. I already tried uninstalling Firefox completely and even remove all plugins and extensions, and the problem persists.

  Uninstall Flash player also solves this, but then I wonder to upgrade the Flash player. This problem occurs in Chrome or IExplorer 10:

  http://Tinypic.com/view.php?pic=15pn2ab & s = 4

  http://Tinypic.com/view.php?pic=24v2u4l & s = 4

  Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox are most likely caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• Need help! Does not start. Only get '_' in the upper left corner.

  Hi, have the following computer:

  HP-Pavilion model: KZ849AV-ABA s3500Z

  Running: win 8.1 (32B) 2G ram

  Have not had any problems I know, so far.

  Run norton regularly, no problem.

  Stop the machine to get out.  Returned, tuned back on and now will not start.

  It lights up, passes in front of the screen for "F9" "F11", etc.

  Then crashes on startup with a single "_" in the upper left corner.

  No beeps or error messages.

  Have you tried several attempts to diff power off, unplug, etc..  Same results.

  Have tried to interrupt the boot to make "diags", see the boot menu.  Everything seems fine, from what I can tell.

  Don't know what else to do.

  As mentioned, saw no problem before that to my knowledge.

  It helps the tight connections and no keyboard activity.

  Possible victory 8.1 automatic update when the last stop arrived.

  Recovery disks, I did several months ago when I upgraded to OS to win 8.1

  But I don't want to go down that path and reload everything.

  Any ideas how to check the boot sectors, chkdsk, etc.. ???

  Thanks in advance,

  Hi guys, thanks for all your comments.

  I managed to understand.

  I used the 'flash' player who made victory - 8.1 you create during the installation of win - 8.1 fresh.

  It's like a recovery disk.

  I started off of him and was able to use Diagnostics out of it to check the hard drive.

  He said it was to fix hard drive errors, then restarted.  Got the same new cursor. Then run this process again.

  Got mesg diff on the correction of hard disk errors, please wait.

  It restarted again and is came fine.

  Several reboots confirm the problem disappeared.

  I think that probably the hard drive boot sector becomes corrupted.

  I'll keep and eye to it and document, we had this problem with the machine.

  Will chose to replace the hard drive or buy a new machine.  Which ever option the woman wants to take (his machine).

  Thanks for your comments.

  PS You forgot to mention that I disassembled the machine and cleaned carefully.  Back together and restart with the same problem.  Then I did the above stuff.

• extra frame created in the upper left corner of the scene when exporting .mov only when the 3D rotation tool

  Hi, I really need help because my deadline is imminent, and I looked all over for an answer but have found nothing... I use Flash Professional CS6 on a Mac and have not had any problems to export before .mov until I tried to use the 3D animation tool. A copy of the first image in the upper left corner of the scene - but it shows not in the timeline panel, or when you test the movie. It appears in the preview by choosing export options and stays there during export. I did about 5 different tests and they all have the same problem - it will only go away if I do not use the 3d rotation tool. Problem is that I really want to use this tool to get the effect I want!

  Thank you very much in advance!

  I could easily create the same problem, even in the current version of Animate. The only solution I could understand was to put a keyframe of Tween non - 3D before where the 3D Tween starts. Just frame 1 look exactly as it does now, only to do tweening 3D pieces start from frame 2. It then exports frameless glitch.

• Get the upper left corner of a cell in the grid (math problem)

  I'm doing a map editor for a tile based game. The Publisher made a grid:

  private function drawGrid (): void {}
  var grid: Sprite = new Sprite();

  var tileSize:uint = 50;
  
  for (var i: int = 0; i < line; i ++)
  {
  grid.graphics.lineStyle (1, 0 x 000000, 0.3);
  grid.graphics.moveTo (0, i * tileSize);
  grid.graphics.lineTo (700, i * tileSize);
  }
  for (var j: int = 0; j < column; j ++)
  {
  grid.graphics.lineStyle (1, 0 x 000000, 0.3);
  grid.graphics.moveTo (j * tileSize, 0);
  grid.graphics.lineTo (j * tileSize, 400);
  }
  stage.addChild (grid);
  }

  And when the user clicks anywhere on the screen a movieclip is added to the stage. The movieclip (exported for actionscript as the tile) should appear in the upper left of the grid cell.

  private void placeTile(mouseX:int,_mouseY:int,_frame:uint):void {}
  var: tile = new Tile();
  tile.gotoAndStop (frame);
  Tile.x = PROBLEM HERE
  Tile.y = PROBLEM HERE
  stage.addChild (tile);
  }

  How can I do? I came with an idea, but it did not work because I have a math problem.  Assume that the user's mouse is in the mouseX = 456:

  I could remove hundreds and use the 56 quotient and check if it is greater than 50. If it is greater than 50, I would put it at x = 500, if not I would put it at x = 450. How can I remove hundreds? You have a better idea?

  Post edited by: wilsonsilva7, because subconsciously, I pressed ctrl + s (for save) and the message has been posted

  You must use the mod (%) operator to remove hundreds serving: 456% 100 = 56, but that does not seem the best way.

  If your tiles are 50 x 50, I think that just using Math.floor(mouseX / 50) * 50 is your best bet:

  Math.Floor(456 / 50) = 9

  9 * 50 = 450 = the left edge of the tile that you clicked on in.

• Well confused. I use click on Favorites in the upper left corner of the screen. I can still but I can't access the properties of the bookmark

  I used to just right click on a bookmark of Bookmark menu in the upper left corner of the screen. Now when I right click on Favorites, I can't get any of the choice to highlight, they are subject, and nothing happens. But if I add bookmarks little star at the high right to help customize I can access an area of the one bookmark away. Seems that just suddenly happened. I like to use the left side of the screen, but cannot access the properties there. Any difficulty?

  Devil well, now, all is well, seems to set just after a reboot. So solved my problem all by my lonesome. Please disregard.