Computers on the ghost network

Similar Questions

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• One of the computers on the local network Windows XP cannot access a http site.

  I ping to the alpha-numeric address (on this computer) and ping uses a private IP address: 198.168.88.68 (all packages are lost).

  All computers on the LAN access correctly.

  When I ping at the same alphanumeric address on other computers

  They ping 204.38.19.76 and I successfully received all return packages.

  I connect using my Internet provider ADSL router. I know it does NAT and all my LAN computers get their IP addresses dynamically.

  I thought it was a problem of Internet Explorer, but after I discovered the computer resolves the ip address for the external address as a private IP address. I force the PC to get another IP address and also I had used: ipconfig/release, ipconfig / renew. And even by configuring it with a static ip address does not work.

  Hello

  I can solve it only in this way https://www.region9.telcel.com/smartdistribuidores/

  This is a secure (via https) site. seems to be a subdomain of http://www.telcel.com.

  Maybe this can help, http://support.microsoft.com/kb/813444

  Otherwise, you should try to talk to http://www.telcel.com support

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WRT110-cant connect 2 computers to the wireless network at the same time

  I recently got this modem-

  It works very well with a computer, but if you are trying to connect to the network wirelessly with a second computer the connection is lost for both computers.

  A computer is a macbook pro installed osx 10.5.7 is either a computer dell laptop on vista

  First of all, you should get your router updated firmware...

  Download 2.77 MB firmware...

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• CAN´t find other computers on the home network Windows.

  I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"?  Thanks in advance.  / Thomas

  Hello
   
  To home network computers running different versions of Windows, we need to make sure that what follows.
  a. ensure that all computers are in the same workgroup.
  (b) the value of the private network location type.
  c. open ports in your firewall to allow file and printer sharing.
  d. turn on additional file and printer sharing options.
  e. consider using password protected sharing.
  5 using the network card.
   
  The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
   
  To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
   
  For more information on the "networking running different versions of Windows' computers, visit the following link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Does not display the computers on the home network.

  Original title: where's the rest of my network?

  All of a sudden, two other computers on my home network are invisible.  I ran the troubleshooter in Windows 7 and it says that Windows Firewall blocks other machines on the network, but it cannot solve the problem anyone knows how to solve this?  Thank you.

  Salvation Watha,

  Please contact Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  Follow these methods to solve the problem:

  Method 1:

  First of all, I suggest you to refer to the article and see if it helps:

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  Method 2:

  Check the link and see if it helps:

  Identify and resolve home network problems

  http://Windows.Microsoft.com/en-us/Windows7/identify-and-resolve-home-network-problems

  Method 3:

  I suggest you temporarily disable the Windows Firewall and check if it helps:

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• Premium 8600 Pro Office jet: Officejet pro 8600 not found by computers on the wireless network

  Hi all!

  I had this problem and goes out at least once a year...

  When I go to print on any computer through wireless connections, computers can't find the printer.  The printer is turned on and connected to the network, and network results show that everything is fine.  I did everything, including restarting the printer, by restarting the computer tries to print the form and reinstall the printer, and I get the message "Printer" not logged on computers.  Each moon blue, if I leave it long enough, he will find somehow the printer and printing, but as I said it's extremely rare.

  Logistics-wise, I am using Comcast for cable internet, and are all Apple products.  The modem is a Motorola and the router is a Linksys.  The router is less than 25 feet from the printer, and there is a clear shot-not walls or to block the signal

  Thanks to all of y ' alls for help!

  Hey @jgossc,

  Welcome to the Forum from HP Support.

  I see that you experience the Mac-to-printer communication problems. I want to help you with this. I have some suggestions that might help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer using HP Easy Start.

  If you find the connection of the printer is more coherent then fine. If this is not the case, click here for detailed instructions on how to address the issue. In particular, it may be useful to clarify the matter once and for all from affecting a static IP address. Please let me know the result of your troubleshooting by responding to this post.

  If I helped you to solve the problem and that you liked this post, feel free to express your thanks by clicking the "Thumbs Up" icon below by clicking on "accept as Solution" (this will help others find the solution).

  Thank you for being a part of the community of HP.

  Have a great day!

• tabs of the device shows no no tabs of desktop computers in the same network

  Hallo,
  I have two PCs on my home network that running Firefox desktop connected to the same sync account. My work PC and an Android phone are connected to the same sync account.
  When I open "synchronize tabs" is show me only the tabs from the firefox Home Office which was last synchronized.
  All Firefoxes have different sycn name.

  What's not?

  THX

  Stefan

  problem solved you must reset "services.sync.client.GUID" about: config
  details, see here: https://bugzilla.mozilla.org/show_bug.cgi?id=1234181

• Slower than other computers on the wireless network

  Hello
  I get a download speed that is slower than the other two laptops using my wireless network. I have 20 MB broadband and get ~ 3Mbps when I test the speed. Usual maximum download speed is 12-15 Mbps for other laptops. Download speed (~ 1 MB/s) and service effiency (92%) are the same I have connect directly or connect wirelessly.
  I plugged directly on the wide-band receiver and speed was ~ 12 Mbit/s, then there is a problem with the wireless connection.
  I ran diagnostics using Intel PROSet and there seems not to be problems. I can't understand why the download speed is stuck around 3 Mbps. Any ideas?

  DELL Inspiron 1520
  Intel Wireless WiFi Link 4965AGN (802.11 g)
  NETGEAR 54Mbps WGR614 v7

  
  

• Printer does not work with computers on the wireless network

  Yesterday I went to the HP site and downloaded the rcommended drivers associated with my Win 7 computer and printer Officejet 7310.  Since then, I can't print at all.  My other laptop connected to the network (Win Vista) will not be printed or the other.  My computer says that my printer is offline.  How can I get these devices to talk to another new

  Two printers working now!  Thanks for the help

• To access the files from the computers on the same network.

  We recently bought two Macs and an airport Time Capsule as we were told that it would allow us to access the files from one computer to another. Run us a business out of our home and require both Mac to be able to access the files from each other or have at least a common location to save etc. Both Mac is put back up automatically and lift you under the "Shared" section of the Finder. The airport shows also here as well. I don't understand how to get this to work so that I can share files easily. Any help would be appreciated.

  Open the system preferences sharing pane, start sharing files if necessary, and then use the connection to the server command in the Finder menu go.

  (142670)

• network printer shows off line but printsf by other computers on the network

  my brother mfc-7840w printer displayed offliine when I try to print from a computer on a network, but works fine on other computers on the same network. I remove and reinstalled printer. Works for a short time but when computer turned off and rebooted the printer go offline. a stop printer, etc.

  Hello

  Follow the steps in the link below and check if it solves the problem.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/network-printer-goes-offline-on-Windows-7/df4321de-EE25-423F-b1c9-d38957d50131

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Network map displays all computers in the company, but I can't access it.

  I just do a fresh install of Win7 Pro 64 bit on my computer here at the office.  When I'm in the file browser, I should be able to click on network and see all the computers in the corporate network.

  I used to be able to.  Now I have not.  I have the location set for work and I belong to the same workgroup as the rest.  I all file sharing and discovery enabled under Advanced setting options.  When I click on "View full map" from the network and sharing Center, I can see all the computers and get information when I hover. What did I miss?

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. is your computer connected to a domain network?
  2. what operating system is installed on other computers on the network? Is - Windows 7 or a previous version of Windows?

  Thank you for details on the question and your efforts to resolve.

  This problem may occur either if your computer is not connected to a network or network discovery is disabled.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Why can I not see other computers on my network?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-see-other-computers-on-my-network

  See also:
  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite 650 d - WiFi drags on the home network

  I have a Satellite 650 d Windows 7 64-bit on a home network - there are two other (non-Toshiba) computers on the home network as well (both run W7 - 64-bit, 32-bit)

  Last week, when I turn on the Toshiba WiFi, it will drag down the overall speed the network about 10 MB less than 2 MB on download - and 2 MB less than 0.2 MB download. When I turn off the WiFi on the Toshiba, the network takes right to the top.

  I wonder if anyone has experienced this problem - and if so, what are some of the problems potential I should look for to try to solve it?

  I already tried updating drivers wireless on Toshiba site - with no difficulty on this end... so looking for other opportunities to meditate

  Hi crazyhorse_1,

  What laptop Satellite you have exactly? Is it Satellite C650D, L650D or what exactly?

  As you can see here in the forum issues wireless are hundreds of discussions on the problems of WIFI and I believe that you can find an answer in the other threads. I did a search of the forum and found some interesting discussions like these ones:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=61331
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60290

  If you have any other questions, just post again ;)