standby, hibernation mode.

Similar Questions

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• locks up PC / gets stuck in standby/hibernation mode

  I clubhouse of compaq with preinstalled windows vista that I bought the pc in September 2008 when I fist got the pc he would be stuck in standby/hibernation mode when I pressed on the moon shaped button or when I let it just fall asleep on his own. I went back to the futureshop in my period of 2 weeks buyers and they interlaced monitor as would the tower should green light that he was always on but monitor would remain off until I unplugged the pc from the wall (button / stop does not work)

  now almost 2 years later July 2010 I have problems with Explorer does not or anything like that to with the internet, even my network sharing Center wouldn't load so I took it with future shop service plan and they found some viruses but removal did not work, so they have restored and now I have new sleep problems and they advised me that it can't be fixed. I have disabled the sleep on the keyboard button, but left the pilot light. the technicians reported that they turned off and now it will not (duh!) they told me that I just have to live without it no idea what can help?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite M115-S1061 - how to activate the standby/Hibernation mode

  I recently got a laptop from my father and the settings are a bit strange.

  My modes standby and Hibernate are also well off and due to the lack of a cooling device, it constantly turns off when I leave.

  So whenever I leave, I have to shut down my computer, then restart again and his old fact.
  I need to find a way to get my laptop to activate the standby or hibernation mode so I can't go through this process each time.
  Its a Toshiba Satellite M115-S1061.

  Also, I checked the options of standby power, and they say the same things as well.

  Thanks in advance for the help!
  -trueway44

  Hello

  The history is confusing for me.
  Just a few questions to the beginning:
  What operating system do you use?
  You use Toshiba power saver or power Windows options?

  If you know that this laptop turns off when you leave why do the restart if you know it goes off even when?

  You let your laptop with no activity, or you leave while an application is running?
  Maybe is related to overheating decommissioning.

• Auto erasing in pro SSD comes from standby/hibernation mod.

  Hallo! Help me)

  I'm on macbook pro 13 "2011 i5. So I bought ssd to upgrade my mac. These are the 128 GB plextor m6pro. I cloned all the disk system ssd. Also I bought optibay, I broke my hard drive cable, so now the whole system works on optibay and ssd (without hard drive).

  I have a serious problem. When I close the macbook and then open after a few minutes my system begins to work is not properly so I click on system reboot and Flash then folder with the question. I like this for 4 times, other times just system opens when I opened my macbook. Then I go to the internet-> disk utility boot and see this ssd is completely erased, no partition! I don't really know what to do.

  It seems that he connects with optibay because it uses cd, mode standby/hibernation and sessions.

  Please help me! =)

  I forgot to add, all the time, I used trimforce enabled, unless it's necessary information. Hope someone could help me.

• Satellite M30X-111 wake up from standby/hibernation mode

  People, like many of you, I had the questionable connection DC problem and I solved this at the time of re - solder the wandering joint on the connector for the motherboard.

  Everything was fine with the laptop until yesterday when I tried to get the machine to wake from standby / hibernation if it is when you close the screen) and now all that happens is that the blue light around the power button lights up, the CPU fan runs for about 5 seconds, the HARD drive light flashes once Maybe two times and the DVD briefly climb towers.

  Also nothing happens... the screen is blank and the laptop is actually not from the occasional maelstrom of the fan.

  Is it in any case to perform a reset of some sort to get it to snap it on hibernation? I have read up on this subject on various forums and have tried to start without memory, without the HARD drive and the DVD drive and still no life.

  Any input is appreciated that I need this laptop to spring into life again.

  Thanks in advance

  Ground

  Hello

  to wake up the machine, simply remove the battery and the AC and leave the machine for a few hours. After that, it should work again.
  By the way: sometimes it s a good idea to do a biosupdate, because maybe the problem comes from the bios.

  Please give some comments about your success... :)

  Welcome them

• Lose Internet connection after sleep/standby/hibernation Mode

  I recently bought a new HP Pavilion Elite e9105z CTO Office and migrated from Win XP to Vista Home Premium x 64, with a NVIDIA nForce 10/100 Mbps Ethernet Controller.  Whenever I come off standby or standby mode, I lose my Internet connection and have to restart my system or run Windows Network Diagnostics to repair the network adapter settings.

  I tried several remedies available on Internet; but unfortunately, nothing has resulted in a permanent solution.  I contacted my service provider ISP (Mediacom) wonder if it was / is a problem with the firmware used to my cable modem SBV5220 support (for example, incompatibility with Vista) and they said there is no.  So far, I have:

  1. Reinstalled NIC driver.
  2. Power options controlled and reset with USB CDC.
  3. Apply the update for Windows Vista (default gateway setting is lost) for x 64 systems (KB933872) - response that update does not apply to the system.
  4. Reset the IP configuration via the Cmd line.
  5. Tab power, unchecked the box that shuts down the adapter then power save comes into play.

  Access the computer several times a day and having to reset Internet connections became extremely aggravating.  I hope there is a solution.  Thanks in advance for your help.

  Back from a 3 week stay, during which my office has been extinguished, my local internet connection would come is no longer active when he came out of hibernation.  The without line worked, but the local connection would not work unless physically, I unplugged the cable from the router (Netgear) and reinserted it.

  After several days of frustration, I went into the Manager of devices, unchecked ethernet optional adapter "allow the computer to turn off this device."
  This seems to have cleared up the problem, at least until now...

• Stuck in standby/hibernation mode

  After a long weekend, our computer will boot back upward.  I tried the power proposed, off, remove the battery and drain the power from the computer after having disconnected everything.  Even when the computer reboots, the only thing that happens is the fans kick on, the mouse lights up but not else.   I tried another monitor to make sure it wasn't a problem there.  The lights on the keyboard light up ever.  I can get a model # but I think that it is not a question of model, but something I can't understand.  Any suggestion would be appreciated before that I have to take it to the store.

  Inspiron 570

  He's back on now...  But thanks for the reply.

  Left it unplugged for 48 hours, has changed the small battery inside and cleaned the dust out of it.  It came immediately after the battery change.  Not sure if it was the question or not, but it works like new now.  Just to note, it has not started to work again until the battery has been replaced.

• How to disable the standby/Hibernation on series Satellite Pro U mode

  Hello
  I have on my Satellite Pro U installed Windows Vista professional series.

  During the defragmentationprocess my machine automatically goes to sleep.
  Does anyone know how to disable temporarily on hold, the defragmentation process can be completed successfully.

  Published by: Admin on December 1st, 2007 08:13

  Hello

  to disable the standby/Hibernation mode on your system, you should just go to "Control Panel" and open 'powersaver' to change settings powersaver.

  The Powersaver contains profiles where powersaving all associates are defined parameters. You can change this profile and disable the sleep/hibernation mode to perform your defragmentation.

  It would help if you post what system you have...

  Greetings

• Running back from standby/hibernation program

  Hey there,
  I want to launch a program every time I come back/sign my computer after the standby/hibernation mode. I only found a possibility to play sounds of a logon each time that this happens, but I can't run programs like that. Is it possible to do it on Vista?

  PS: If it isn't, can you send this request apparently simple functionality to the Windows 7 development team?

  While the mark's instructions look as if they will work, there is a more elegant way to achieve, using Vista built in Task Scheduler.

  To create a task that runs whenever you unlock your profile:
  1 open the Task Scheduler [start > Panel > system and Maintenance > administrative tools > Task Scheduler (or just type "Task Scheduler" in the box start search)]. You will need an administrator account/password for access to this.
  2. Select "Create a task" to create a new task.
  3. a panel with several tabs will open.
  4. fill the 'Général' tab to meet your needs.
  5. go to the "Triggers" tab and choose "new". Another panel will open. At the top of this Panel, you will see a (see below). Open it and choose ' to unlock the workstation. Then choose if you want this task to run just for your profile or for everyone. Click on 'ok '. (You can find it useful to use the option "Delay task" to delay the task for 15-30 seconds to give your office a chance to load before the program runs.)
   
  6. go to the Actions tab, select 'New', choose 'Run program' and locate the program you want to run.
  7. Select the tabs 'Conditions' & 'Settings', respectively and change various settings according to your needs. (Make sure that the "Run on AC Only" option is disabled if you are using a laptop and want the task to run when it is unplugged).
  8. click OK to save your new task.
  Now, whenever you unlock your profile after the standby or Hibernate mode, your program runs.
  If you follow these instructions, but choose "connection to" rather than "To unlock the workstation", your task will run whenever you connect (unlock and logon are not the same thing as the computer is concerned, so keep that in mind).
  This may not work if your profile is not protected by a password, but all mine, so I couldn't test it in this situation.
  I hope this will satisfy your needs.
  Best wishes
  BookwormDragon

• I can't use Hibernation mode/mode standby on my Satellite

  I can't use the Hibernation mode and also in standby mode! After that passage to these forms of my laptop shows a blue screen with the message «Preparing for the Hibernation/standby mode...» "and... There is nothing after this message just as the comp is hanging. Please advise me someone what can I do with this.

  Why you n t see more details? ?:|
  I put t understand users who post something but without any information on the laptop, which the OS has been pre-installed, manually or the recovery CD, what was done on the laptop, (X) - etc.

  Sorry for this comment but I hope you understand my point of view.
  However, using the OS from Toshiba Recovery CD?

  Usually if the Toshiba Power saver was installed on the laptop then this utility controls the Hibernate mode and the day before.
  But as I mentioned above, the OS from the restore CD should work. If you installed it manually if something is missing.

• HP Pavilion dv6 - 2151cl goes into Hibernation Mode after several hours in Standby Mode

  Hello

  Generally, I leave my laptop plugged in and Standby Mode when I don't use it.  I noticed, after several hours (12?), that the power led has stopped flashing.  When I press the power button, it starts as if awakening from Hibernation Mode.  I am using the recommended HP Power Plan but can't find any option to explain what is happening.  Is there a way to avoid change of Mode of Hibernation of Standby Mode?

  TIA

  Hey noahrhys,

  Don't worry - this is normal default behaivor to save energy. It is fully configurable! You can adjust it never Hibernate mode or hibernate after a longer time - whoever you want - all while keeping the mode 'sleep'.

  Here is how to adjust this setting (assuming you are running Windows Vista or 7):

  1. Near the clock on the bottom right, right click on the battery icon.
  2. Click on "Power Options" and a new window will open.
  3. Next to the selected power management, click on "change plan settings".
  4. In this new screen, click "change power avancΘs."
  5. Look around until you find the category of 'Sleep' and expand by clicking on the + next to him.
  6. Find the "Hibernate after" category and expand it by clicking on the + sign next to it.
  7. Adapt these 2 values (on battery and sector) to one that you would like (type in the minutes). You can also type zero (0) to disable Hibernate completely.

• M30X: Problem with standby and hibernation modes

  Hello

  In my M30x, I configured my laptop to Hibernate when near the lid. However, when I turn on the computer after this hibernation, there is a problem with the sound settings - I cannot play any music or cannot use a microphone outside, unless I reboot. If reboot is required, then there is no sense to use this feature of hibernation. Also, sometimes after these Awakenings (turn on after hibernation) my mouse (touchpad) spontaneously turns off. This happens when I plug my pc on TV, then come back and close the cover. There someone experiencing similar problems and can help me? Thanks in advance

  [Edited by: admin on 8 May 05 08:02]

  Hello

  It is not easy to say what can be the cause of this problem. I very often use the hibernation mode and there is no problem that even several applications are open. You have this problem only if the device is connected to the TV or every time after hibernation mode?

  It will also be interesting to know if this occurs after each process of awakening or first several modes of hibernation.

• Tecra M5 comes out of standby/hibernation without guest mode!

  My Tecra M5 goes into sleep/hibernation mode without problem, but after a few minutes will start up again without prompting. Ive tried to change the power settings but have failed. Someone knows something about this problem? -mgh2k

  Did you check Wake up on LAN option in the BIOS? This option is disabled?

• HP Pavilion mode # 15 - n065: standby / Hibernation does not not on this laptop (model # 15 - n065) (10-window-pro, 64-bit).

  Hello

  I've updated my laptop HP for Windows - 10 - PRO EDITION (64-bit).
  
  Update went well.

  All the drivers seem to be installed device and work.

  Operating system works very well.

  I'm having a problem with sleep / Hibrernation modes.

  When I close the lid for a few seconds and then reopen the lid the laptop does not wake up.

  When the computer goes to sleep it seems to go in hibernation. Even though I disabled the hibernation in the power of the system settings.

  When I press a key on the keyboard of the laptop won't wake up.

  It will not wake up from sleep or hibernation mode.

  I need to power cycle the notebook to log in Notepad.

  My laptop (HP 15.6 "15r011dx with the baytrail-M Intel Pentium platform) works very well with Windows-10 and wake up very well to the mode sleep and extended. So, I know what present works with Windows-10.

  How can I fix?

  Do I need to install other drivers/software?

  This feature is not supported on this HP laptop?

  Thanks in advance,
  Alex

  -----------------------------------

  My hardware:

  HP Pavilion 15.6 "laptop with Intel-Core-i3 4005U haswell CPU (model # 15 - n065)
  Product # E8B13UA #ABA

  ------------------------------------

  

  Hello

  Please find the link given below might help you solve your problem.

  http://support.HP.com/us-en/document/c03383935