Standby / Hibernation of HP Pavilion Windows 8

Similar Questions

• How to disable the standby/Hibernation on series Satellite Pro U mode

  Hello
  I have on my Satellite Pro U installed Windows Vista professional series.

  During the defragmentationprocess my machine automatically goes to sleep.
  Does anyone know how to disable temporarily on hold, the defragmentation process can be completed successfully.

  Published by: Admin on December 1st, 2007 08:13

  Hello

  to disable the standby/Hibernation mode on your system, you should just go to "Control Panel" and open 'powersaver' to change settings powersaver.

  The Powersaver contains profiles where powersaving all associates are defined parameters. You can change this profile and disable the sleep/hibernation mode to perform your defragmentation.

  It would help if you post what system you have...

  Greetings

• Re: Not possible to enter sleep/standby extended - standby/hibernation is not allowed now

  No matter what method I use to try to switch to Stanby or hibernation mode, a prompt indicating "standby/hibernation is not allowed now" appears.

  For example, this happens when I go through start-> shut down the computer, or when I close the lid of my computer that I put to sleep mode.

  Help, please! Thank you!

  Hello

  First of al I'd like to know what model of laptop you have.
  Then it is possible that the Hibernate mode.

  Please check the settings if Toshiba Power Saver was installed on the laptop to save energy, and then check the settings there.
  Otherwise, you must check the power Windows Option in the control panel

  See you soon

• Keyboard gives erroneous characters of standby / hibernation

  Dear all,

  I have an Acer Aspire V5-471. It is fully updated with Windows8.1 and all the MS later updates.

  The problem is that sometimes when the computer from sleep / hibernate mode, the keys to generate incorrect characters. It is a major problem when trying to enter my password to logon.

  I thought it might be a hardware or driver problem and checked the keys and uninstalled/reinstalled drivers, all to nothing does not.

  I then connected with another account and worked well, I created for the first account and who then worked fine until I put the computer to sleep (lid closed). When it happened again, I just changed my user, switched back and it's OK even once in the first count.

  So it seems to enter the mode standby/hibernation somehow corrupts a keyboard user account assignment.

  Has anyone else had this problem? I searched the site and cannot find all similar occurrences.

  Thank you

  Chas.

  No he never had this problem until recently.

  I found this article from a search:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-w...

  Seems to be a problem in microsoft with keyboards.

  If I try to open a session that get incorrect password.

  I click on the back of the switch user screen then click on my login information and can connect OK, it seems when the computer from standby the brining, the KB is considered to be bad for the hotmail account, go to user switching screen seems correct.

  I'll try the proposed to the last SYSTEM RESTORE and see if that fix it.

• Running back from standby/hibernation program

  Hey there,
  I want to launch a program every time I come back/sign my computer after the standby/hibernation mode. I only found a possibility to play sounds of a logon each time that this happens, but I can't run programs like that. Is it possible to do it on Vista?

  PS: If it isn't, can you send this request apparently simple functionality to the Windows 7 development team?

  While the mark's instructions look as if they will work, there is a more elegant way to achieve, using Vista built in Task Scheduler.

  To create a task that runs whenever you unlock your profile:
  1 open the Task Scheduler [start > Panel > system and Maintenance > administrative tools > Task Scheduler (or just type "Task Scheduler" in the box start search)]. You will need an administrator account/password for access to this.
  2. Select "Create a task" to create a new task.
  3. a panel with several tabs will open.
  4. fill the 'Général' tab to meet your needs.
  5. go to the "Triggers" tab and choose "new". Another panel will open. At the top of this Panel, you will see a (see below). Open it and choose ' to unlock the workstation. Then choose if you want this task to run just for your profile or for everyone. Click on 'ok '. (You can find it useful to use the option "Delay task" to delay the task for 15-30 seconds to give your office a chance to load before the program runs.)
   
  6. go to the Actions tab, select 'New', choose 'Run program' and locate the program you want to run.
  7. Select the tabs 'Conditions' & 'Settings', respectively and change various settings according to your needs. (Make sure that the "Run on AC Only" option is disabled if you are using a laptop and want the task to run when it is unplugged).
  8. click OK to save your new task.
  Now, whenever you unlock your profile after the standby or Hibernate mode, your program runs.
  If you follow these instructions, but choose "connection to" rather than "To unlock the workstation", your task will run whenever you connect (unlock and logon are not the same thing as the computer is concerned, so keep that in mind).
  This may not work if your profile is not protected by a password, but all mine, so I couldn't test it in this situation.
  I hope this will satisfy your needs.
  Best wishes
  BookwormDragon

• locks up PC / gets stuck in standby/hibernation mode

  I clubhouse of compaq with preinstalled windows vista that I bought the pc in September 2008 when I fist got the pc he would be stuck in standby/hibernation mode when I pressed on the moon shaped button or when I let it just fall asleep on his own. I went back to the futureshop in my period of 2 weeks buyers and they interlaced monitor as would the tower should green light that he was always on but monitor would remain off until I unplugged the pc from the wall (button / stop does not work)

  now almost 2 years later July 2010 I have problems with Explorer does not or anything like that to with the internet, even my network sharing Center wouldn't load so I took it with future shop service plan and they found some viruses but removal did not work, so they have restored and now I have new sleep problems and they advised me that it can't be fixed. I have disabled the sleep on the keyboard button, but left the pilot light. the technicians reported that they turned off and now it will not (duh!) they told me that I just have to live without it no idea what can help?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• Satellite M30X-111 wake up from standby/hibernation mode

  People, like many of you, I had the questionable connection DC problem and I solved this at the time of re - solder the wandering joint on the connector for the motherboard.

  Everything was fine with the laptop until yesterday when I tried to get the machine to wake from standby / hibernation if it is when you close the screen) and now all that happens is that the blue light around the power button lights up, the CPU fan runs for about 5 seconds, the HARD drive light flashes once Maybe two times and the DVD briefly climb towers.

  Also nothing happens... the screen is blank and the laptop is actually not from the occasional maelstrom of the fan.

  Is it in any case to perform a reset of some sort to get it to snap it on hibernation? I have read up on this subject on various forums and have tried to start without memory, without the HARD drive and the DVD drive and still no life.

  Any input is appreciated that I need this laptop to spring into life again.

  Thanks in advance

  Ground

  Hello

  to wake up the machine, simply remove the battery and the AC and leave the machine for a few hours. After that, it should work again.
  By the way: sometimes it s a good idea to do a biosupdate, because maybe the problem comes from the bios.

  Please give some comments about your success... :)

  Welcome them

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• Auto erasing in pro SSD comes from standby/hibernation mod.

  Hallo! Help me)

  I'm on macbook pro 13 "2011 i5. So I bought ssd to upgrade my mac. These are the 128 GB plextor m6pro. I cloned all the disk system ssd. Also I bought optibay, I broke my hard drive cable, so now the whole system works on optibay and ssd (without hard drive).

  I have a serious problem. When I close the macbook and then open after a few minutes my system begins to work is not properly so I click on system reboot and Flash then folder with the question. I like this for 4 times, other times just system opens when I opened my macbook. Then I go to the internet-> disk utility boot and see this ssd is completely erased, no partition! I don't really know what to do.

  It seems that he connects with optibay because it uses cd, mode standby/hibernation and sessions.

  Please help me! =)

  I forgot to add, all the time, I used trimforce enabled, unless it's necessary information. Hope someone could help me.

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  See if a program was installed for him. Or use something like Skype / instant messaging program

• OfficeJet 6600 does not recognize my new HP Pavilion windows 8.1 for scanning

  I have a HP Officejet 6600 networking with my new HP Pavilion windows 8.1 it prints fine but does not recognize my computer when I want to scan. Whenever I want to scan a document to my computer I have to run Scan doctor. I called tech support and they can't help me because my printer is no longer under warranty as I bought it December 2012. but my office was purchased November 2013. They said that it is clearly a problem with the printer and not on the computer. They won't even talk to me or answer my questions without fees being paid first.  The scanner recognizes my laptop and desktop to the husband who have vista and 7, respectively. But I don't understand why it will print without difficulty and habit of scanning.

  Hi leila1964,

  Welcome to the Forums of HP's Support.

  I want to offer a helping hand with the 8.1 of Windows not scanning with your HP Officejet 6600. When you run the HP print and Dr. Scan on the computer it says it fixes some thing or that it cannot fix what whether?

  Given that the printer works on the other two computers (Vista and 7), the problem is with the WIndows 8.1. I want to uninstall the printer software and the HP printer install wizard makes sure that we get the newest software possible.

  Let me know how it works.

  Thank you

• Pavilion, Windows 8 desktop computer, none of the external speakers. internal speaker?

  How sound my desktop computer Pavilion, Windows 8, with none of the external speakers?

  It says no driver installed audio internal speaker.

  Where can I download the audio driver appropriate?  Which audio driver would it?

  When you request support, please provide the full model name and product number (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the side, back or bottom of your computer, or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  You get no sound without external speakers of a certain type. Your HP desktop computer doesn't have the internal speakers and therefore requires external speakers, before that resonates. Please buy a set of external speakers for your problem.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  original title: sleep mode settings

  My laptop goes to "standby mode" much too quickly (Windows 7). How can I change the settings to extend this time?

  Click on start > Type, sleep > change when the computer sleeps