Printer HP5546: problem with Instantink on printer 5546

Similar Questions

• HP Officejet 5740: there is a problem with the printer

  Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

  This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• Problem with printer or ink system failure

  I have a HP Officejet 6600, and I get this message:

  "There is a problem with the printer or ink system.  Turn the printer off, then on.  If the problem persists, contact HP. »

  Well, I did it.  I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times.  I always get the error message.  I also took printhead of the printer and put back them in.  Does anyone have a solution that might be able to share with me for this problem?

  Thank you

  Melinda

  My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• 6700 all in a single premium printe: problem with printehead on tires all hp offers with no success.its only less than 3 years.

  his 3yrs.old even had a gun for 10 years with no problem.when I was able to contact hp, they said I have to pay it's bs.they just that buy you a new printer.

  Hi @highseas99,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the print head. I'll be happy to help you.

  By your message, you have tried all the troubleshooting. The print head is integrated to this printer and is a part which cannot be replaced. Buying a new printer is the only option, but HP offers printer ' trade-in Trade-up '.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• 7640 ENVY: ENVY error 7640 "There is a problem with this printer"

  Hi guys. I had this printer 4 months ago and it worked as wonderful. But this weekend when I turned it on the error "There is a problem with this printer" appeared right after it connected to my wireless network.

  I did several tests and the error comes only if the network is connected to the internet.

  When it is not connected to the internet fine print (prints, scans, all via wifi) jobs.

  I have a MAC and airport Time Capsule.

  Is there a set any that solved the problem?

  Now it's working. The problem was Auto IP. Set it to manual and it started working.

  Thanks in any case.

  Concerning

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• Problem with not to print all pages in a document with a HP Photosmart 7520

  I have a HP Photosmart 7520 networked printer.  If I try to print a document of medium to large sized (25 pages), it prints the first 20 without problem, but the remaining pages are incomprehensible and illegible. Initially, because it appeared that the problem was caused triny to print in the background with the closed document, so I tried to print the entire document with it open along the.  This no longer works.

  Hello CRC8591, I hope you are well

  I understand that you have a problem with printing a 25-page document that the last 5 pages are so do not print correctly and show to be unreadable. I want to help you with this question, the best that I can!

  I have a few questions to familiarize yourself a little more with the question and I have also some suggestions to start with.

  1. what operating system do you use?

  Operating system Windows am I running?
  Mac OS X: how to find which Mac OS X Version is on my computer?

  2. try to print the document of several pages of another program. It prints successfully elsewhere?

  3. the same problem occurs when you copy or scan multipage documents?

  Try:

   

  1. reset of the printer and leave unplugged for at least a minute.

  Plug the printer directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help this situation.

  2. check if the printer needs a firmware update: get the latest Firmware and updates

  Let me know the results!

  Have a great Tuesday

• HP officejet 7612: "There is a problem with the printer or ink system". That is the message, no error code.

  "Is there a problem with the printer or the ink system". The error message. Without error code. Original cartridges.

  HP has a center of service to Puerto Rico, where I live?

  Please tell me there is a solution for this problem.

  In the paper here troubleshooting steps can help resolve the printer ink system message justify Officejet 7612.

• HP Officejet Pro 6830: Problem with head of printing and error 0xc19a0020

  Tried on MS 8.1 64-bit and Mac OS.

  Having a problem with the printer.

  Constantly saying problem with printhead 0xc19a0020.

  Tried the troubleshooting suggestions, no results.

  I tried unplugging ink and placed back, even.

  Any suggestions? Should I replace the print head? Possible with warranty?

  Hi @Sergey_Burnos

  You will need to contact HP Support to obtain a replacement. Are you based in the United States? If so, please call 1-800-HP-invent (1-800-474-6836).

  Can you please let us know how you get on?

  Thanks, Ciara

  http://support.HP.com/us-en/document/c04839288