Static BOUNCING as well as Audio.

Similar Questions

• public static its IDT High Definition Audio CODEC

  OK, I have the HP Pavilion Notebook and I have a problem with the internal speakers. There is no noise from them and when I plug in headphones, there is only static. I've checked everything, problems running and making sure that everything was permitted and now, but it remains the same.

  Hello

  1. who is the operating system installed on your system?

  2 did you of recent changes to the system before the show >?

  3 is the issue limited to the internal speakers?

  4. that you get an error message while playing any audio file?

  Method 1:

  Follow the link below and follow the steps and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Follow the link below and check if that helps.

  http://h10010.www1.HP.com/ewfrf/wc/document?DocName=c01912228&LC=en&cc=us&DLC=en&product=18703#N91

  In addition, check out the links below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems (Applicable to Windows 7)

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter  (Applicable to Windows 7)

  Let us know if it helps.

• How can I slow down a video that has been recorded too fast as well as audio, so it looks like a normal speed?

  Hello

  So, I recorded about 40 slides of movie without realizing account than the speed needed adjustment on the projector. Then the audio sounds fast enough. I was wondering how can I slow down a bit without making a sound too slowly? I tried to adapt it to the FCP with the c case, but it make it too slow and makes it still the audio sound like chipmunks. I want to set the audio where it seems normal. I could get out of the video and adjust it in audacity, but I won't do that because then it will take me an eternity to align to the clip in FCP and even then it may not work right. I have attached a small clip for you all to see what I need assistance.

  http://expirebox.com/download/c398dc60df2942d5430084f3f7423f96.html

  Help, please! I thank in advance.

  FCP 10.2.3

  If you disable in the drop c, keep Pitch, you should lose the chipmunk effect.

  Russ

• HP envy 17 t k200 cto: hp envy 17 t k200 static on audio

  Get the static background on audio and video playback. Playback is audible and understandable with a intermittent low grade in the background static. I used HP Support Assistant audio to check and it shows no problem. This book includes Beatsaudio, so I was expecting sound quality. It is rather annoying static on all types of audio that I copied from my CD, audio from Pandora and movies.

  I've only had this PC for 90 days. How can I get support for this problem.

  Hi @tjw202001,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you only had your laptop for about 90 days.  You are dissatisfied with the quality of audio playback is static.

  You have run the wizard from the HP Support and no problems were detected.

  You did all your Windows updates?

  Have you ran the Windows troubleshooting tool?

  You tried audio that you have copied to a CD, Pandora and movies.

  Have been on the computer or streaming movies?

  Here is a link to the computers HP - Beats Audio Console (Windows 8)

  HP ENVY PCs - Beats Volume control setting of Direction does not work

  If you still encounter a problem please contact HP support for help you have warranty.

  Contact HP to Contact HP Support assistance

  To say thanks for the reply please click thumbs up button below.

  Don't forget to tell people in choosing the solution provided if this solves your problem.

  Good luck!

• No sound/audio in MP4 files

  Hi hoping someone here can help out - I use El Capitan 10.11.6 and the audio is missing some MP4 files that I downloaded from a GoPro camera. My sound is fine otherwise, output noise is fine, alert sounds are fine. MOV files off other cameras play well with audio easily here, but I don't hear anything in the files MP4 Quicktime, VLC, Final Cut Pro X, even if in Final Cut Pro X there is an audio waveform on each clip and they were converted to Quicktime using the MPEG stream clip (there no audible sound in the program either). I tried the same files on colleagues Mac running Mavericks and the sound is fine out there so here something to replace or reinstall?

  You run the same exact file on El Capitan and the Mavericks?  Shouldn't be any change unless MPEGstreamclip has been defined to use some esoteric audio codec in the file.  First of all, there is no reason to convert the files off your GoPro.  FCPX will work with native files very well.

  And, if you never convert, use the GoPro Studio app for this.  Nothing I do will have problems with the standard files.

  We use GoPros all the time and didn't have any problems.  What are the settings on the GoPro cameras?

• iMovie 10.12 El Capitan audio question

  I recently updated my 2009 MBP Middle no El Capitan. This forced me to buy the new version of iMovie 10.12.  Since then, I have a hard time to normalize the audio tracks in an iMovie project.  How do I in the latest version of iMovie? Is there a way I can standardize all separate audio clips at the same time? Or do I have to do each one individually?

  Hello

  This iMovie help link will explain how to adjust the volume on individual items.

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3b5ded23e

  You can set multiple clips in volume at the same time shift-select-the while they are selected at the same time, and then clicking on the speaker icon in the toolbar at the top of your screen.   You will see a scroll bar that when you move back, allows to adjust the volume at the same time on all of the selected clips.  It works as well for audio embedded in the video clips.

  When you work with audio, make sure that the box show the waveform is selected in the settings box you get when you click the button settings on environment right on your screen.

  I hope this helps.

  -Rich

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• Why do I have a loud hum when with audio recorded when I read a file saved with Microsoft LifeCam with the latest version of Microsoft Essentials?

  Why do I have a loud hum as well as audio recorded when I play a file saved using Microsoft LifeCam with the latest version of Microsoft Essentials?

  HUMS are usually ground fault loops.

  If it is a test of laptop with and without the power connected (using battery instead)

  The mic can also have a cut wire, etc.

• Windows 10 audio drivers for Inspiron 17R SE (7720, mid-2012)

  Hello

  On the page of the product related to my Inspiron 17R laptop SE (7720, mid-2012) there is information that "Dell has tested this product to confirm that it can be upgraded to Windows 10.

  I installed Windwos 10 Pro x 64 bit that everything works well except audio.

  There is no driver to download from the download page for the Audio and subwoofer on my laptop does not work.

  Link to the driver download page: www.dell.com/.../advanced

  Could I get download link for compatible audio driver (IDT sound card), please

  Hey there,

  I had the same problem with my Dell.

  I just installed the driver available for Windows 8.1 (64-bit) and it works just as well.

  This method works if all goes well.

• Audio works everywhere except in games.

  I recently got the X 51 Alienware desktop computer and I have audio problems. I installed a few games video and sound works in the start videos but it stops once I reach the menu and remains off during the game as well. Audio works for everything else on my computer except in this case. I'm running my audio through hmdi at my TV.

  Thanks in advance.

  I actually fixed. I had to disable the Intel HD Graphics 4000. Thanks for your suggestions so.

• My audio device is flicking on and outside (please help right as soon as POSSIBLE)

  Hello, so I met this problem several times, but I have no idea how to solve this problem as well. my audio blinks and turns off constantly

  _

  https://gyazo.com/1a1085ddfa1669fbf054af15556d0493--lien course, it's just a gif on doing my sound

  -

  In any case, I tried to fix it has been dealing with issues, but did not work

  Hi _xTeufelx_,

  I'm so glad you posted in Microsoft Community!

  To provide the right solution for your concern, please provide the details below:

  1. Did you change on your computer like installing programs or applications until you experience this problem?
  2. You have external speakers connected to the computer?
  3. Are you having this problem when you play a specific program or this happens on all programs that access you?

  Please follow the suggestions below and let us know if it helps:

  Uninstall the audio driver:

  1. Click Startand then click Control Panel.
  2. Click hardware and sound.
  3. Click on Device Manager.
  4. Right click on the audio driver and choose uninstall.

  To install audio driver please visit this link: update a hardware driver that is not working properly

  After you have reinstalled the device driver please select all audio devices. To do this, do a right click on the audio on the bottom, just icon beside the clock icon, choose playback devices. Then, right-click and choose Show all disabled devices. Once all audio devices appears, please right-click each device and choose Activate.

  Keep us in the loop!

  Thank you.

• audio interruptions every 30 seconds on WAV recording AND playback - computer laptop Dell 1545, Windows 7

  Recently (the last couple of weeks), my laptop Dell 1545 with Windows 7 started having a problem: when I record or reading any WAV file (or a file MPG or WMV video too by the way) with any application (I tried several), there is a stuttering or interruption every 30 seconds like clockwork.  I have tried everything and can't seem to fix it.  During playback, it causes a split second buzz or silent, on the record, missing just a fraction of a second of audio, leaving a 'leap' in the best stuff WAV audio recording.  The only changes that I made in the system in the past month have been a few updates to Windows 7.  It ruins any recording or playback, I try to do, and is very frustrating.  It does the same thing on the files that are years old and new files (reading).  If I burn these files to a CD or DVD, they play very well in the CD drive or DVD, is not a problem in the files (except those currently record during breaks).

  What I tried:

  Much, restart several times.

  Reinstall the driver for my audio interface, even if she did the same on the native sound card too.

  Download the new driver from the audio interface and install it.

  Back to the old driver, then again to the new.

  Tried to record from multiple sources, ditto.

  I tried recording through the native as well as audio interface sound card.

  Deleted 40 GB from my hard drive.

  Defragged my hard drive

  Off my anti-virus program

  Close all other programs other than playback of the file.

  All USB disconnected elements.

  Tried to plugged the charger and entirely on batteries.

  RAM tested.

  Tested CPU.

  Nothing has worked so far.

  Any ideas?

  DWasnich: I had the same problem as you yesterday after restoring my Dell Inspiron 1545 to factory image. Through process of elimination (as mentioned Gokul T) I was able to determine that one of the services was originally the audio and video to jump to 30-second intervals. I disabled the 'Intel Matrix Storage Monitor' service and solved the problem. Why this service was installed and running after the factory reload is confusing. This is one portable hard drive without needing a RAID System. I hope this has solved your problem too! Joe

• Which is wrong with this reading of the audio files...! ???

  Hi all

  I try to read two different audio files with the following code piece. individually, they play well. When I try to play at the same time which is at the same time, it is give IllegalStateException and does not play any audio file.

  When I play them separately, they play well. My requirement is to play 1 file as background music and another as foreground.

  Audio playback code.

  public class Audio implements Runnable//extends Thread
  {
      private Class clazz;
      private InputStream is;
      public Player player;
      private String audiofile;
      private int fileType;
      private int mode;
      public Audio(String path, int type, int mode)
      {
       audiofile = path;
       fileType = type;
       this.mode = mode;
      }
      public void run()
      {
                     //this sample demonstrates playing an MP3 file that has been
                     //added as a resource to the project
  
                  try
                     {
                        //retrieve the MP3 file
                        clazz = getClass();
                      //create an instance of the player from the InputStream
                        is = clazz.getResourceAsStream(audiofile);
  
                        // 1-- mpeg, 2-- wav audio files
  
                        if(fileType == 1)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/mpeg");
                        else if(fileType ==2)
                            player = javax.microedition.media.Manager.createPlayer(is, "audio/x-wav");
                        player.setLoopCount(mode);
                        player.realize();
                        player.prefetch();
                        player.start();
  
                      } catch (Exception ex)
                      {
                          UiApplication.getUiApplication().pushScreen(new CloseScreen("Hello"));
                      }
              }
  }
  

  // if call this, commenting section2 it works well
                 //section1
      Audio at = new Audio("/neon1.wav",2, -1);
      Thread at1 = new Thread(at);
      at1.start();
  
  // if call this, commenting section1 it works well
                 //section2
          Audio at3 = new Audio("/neon1.wav",2, -1);
      Thread at2 = new Thread(at3);
      at2.start();
  
  // when i uncomment both section1 and section2 and execute it is not playing giving an exception IllegalStateException.
  

  all aid should be of great use.

  Thank you and best regards,

  PraveenG

  On the storm, it is not possible to play 2 sounds loaded from a file at a time.  If you try this, the first sound stops and the second sound will be played.

  You can, however, load and play a sound (background music) and play other sounds (sound effects) by using Alert.startAudio ().  The first noise not would be cut.  The only problem with this is that the Alert.startAudio sounds are not the best.

• Audio video problems

  Windows 7 on EMachines when playing a video online audio and video starts OK and buffers quickly, but the audio stops a few seconds and the video freezes as well as audio.  Very 'jerky' effect  It stops and starts every few seconds throughout the video.

  Windows 7 on EMachines when playing a video online audio and video starts OK and buffers quickly, but the audio stops a few seconds and the video freezes as well as audio.  Very 'jerky' effect  It stops and starts every few seconds throughout the video.

  Smooth buffering depends on your internet speed. Make sure that your connection is very good.
  Download and install the latest version of adobe flash player.