status: 0xc000000f

Similar Questions

• Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)

  HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f

  How can I solve it please, I have windows won start t all hekp would be much appreciated.

  Kind regards

  Yvouille

  Hello

  The following assumes that you are running Windows 7.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• C:\windows\system32\system. status: 0xc000000f missing

  I was able to boot windows vista Home premium so far.

  Windows to restart installation of ubuntu 11.10 arfter system started without problem is a check disk and restarted and now I get this
  C:\windows\system32\system
  the file is missing or damaged
  status: 0xc000000f
  Insert the Setup disk
  turn on pc
  Choose language options, and then click pc repair
  I tried to put in the disk of installation but no luck
  HELP!???????????????????????????????

  Hello

  What is the brand and model of the computer?

  Method 1.

  I suggest you try the steps in this article.

  What are the system recovery options in Windows Vista? : http://windows.microsoft.com/en-in/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  Method 2.

  What happened to the Recovery Console? : http://windows.microsoft.com/en-us/windows-vista/What-happened-to-the-Recovery-Console

  Refer.

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information": http://support.microsoft.com/kb/927391

  How to use the Bootrec.exe in the Windows recovery environment to troubleshoot and repair startup in Windows problems: http://support.microsoft.com/kb/927392

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not work: http://support.microsoft.com/kb/934540

  I hope this helps.

• Windows Vista problem with status: 0xc000000f

  My computer has stopped working it States a recent hardware or software change might be the cause...

  When I select start windows normally it passes through the process... with green botton bars... through a blue screen with numbers... turn off for a second... then back to error recovery Windows then Windows Boot Manager where I get this status: 0xc000000f
  The only keys that make anything on the keyboard are enter, ESC, and arrow...
  I can't find my installation disk... When I turn off the computer is not a difference... same messages.  What should I do to fix my computer?
  Help please!

  Hi Easpencer,

  Did recent changes to the computer?

  You must get the disk to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Additional information:
  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

• Windows did not start; Status: 0xc000000f

  my windows vista couldn't start, citing the following path of missing or damaged file:

  File: \windows\ststem32\winload.exe

  Status: 0xc000000f

  I then followed the instructions and used the installation cd, chose the time settings and language etc, got for options recovery system and selected the Startup Repair, only to get the message "windows cannot repair this computer automatically.

  Oh, and for some reason any I can not at all in safe mode.

  Hello

  You can check this link and try Method 3:
  http://support.Microsoft.com/kb/927391

• Get the black screen at boot: status: 0xc000000f

  Original title: status: 0xc000000f

  I get a black screen when I turn on my laptop (Windows Boot Manager)

  Windows could not start.  A recent hardware or software change might be the cause.  To solve the problem:

  1. Insert your windows installation disc and restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "Repair your computer."

  I followed all the instructions and still it will not read the installation disc.

  I put in the disk and restart the computer, but it brings back me to the same black screen.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or damaged.

  Can someone help me with this question to where it will read the disc. or what I am doing wrong?

  I got Appreciate your help :)

  Ok.

  You can watch the image here - is your BIOS looks in this picture:

  https://SkyDrive.live.com/#CID=23FD66EFD8D06B76&ID=23FD66EFD8D06B76%21177

  If so you can try everything first:

  (1) turn on (or restart) your office

  (2) press on instead of - you should see "Start menu", where you must select "Drive of CD-ROM.

  If does not work (this means no "Boot menu" only appeared), then you need to change "Boot Device Priority" - go into the SETUP (   course of priming of the desktop), use the right arrow to select 'Boot' (upper image) - use the down arrow to select "Boot Device Priority" and press enter - you should see something as shown in the photo at the bottom.

  Now choose "Drive of CD-ROM" (arrow down) and by using the key + or - move the first CD-ROM drive. Press on (save & exit).

  Use this DVD:

  1. MICROSOFT WINDOWS VISTA HOME PREMIUM SP1 X 86

  LC

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• FILE: \BOOT \BCD - status 0xc000000f

  OK, Vista running and get the error on the startup file: \boot \BCD with status 0xc000000f

  I know not how to solve this problem using the diskette provided by dell and I see a lot of people have the same problem.

  Microsoft gave instructions on how to solve this problem, but they did not address the cause,

  Everything works fine until there is an another update of Vista then it does again?

  Why is this and how can it be solved for good?

  answered in other threads

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/1920f1c8-A1D3-416c-B03B-ca998f6cec7a
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/3df8c662-2076-4d1a-8E3E-7fbabc800445 Rob - bicycle - Mark Twain said it is good.

• HP Pavilion g4 windows 7 64 bit startup error "status: 0xc000000f.

  Hello team,

  I have HP Pavilion windows 7 64-bit g4 laptop.

  I installed android Kit and restarted my laptop. After that my laptop is not initialized.

  I am getting below error "status: 0xc000000f.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  Insert your Windows installation disc, and then restart your computer.
  Choose your language settings, and then click "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  Status: 0xc000000f
  Info: The boot selection failed because a required device is not accessible.

  I don't want to lose the data.

  I don't have a CD to install windows 7.

  How to solve this.

  Your help is very appreciated.

  Thank you

  Shishir

  Hello

  The first thing I would check is that the disk you created will start in another machine - just to rule out a problem with the drive itself.

  If the disc seems to be Ok, try rather to create a bootable ISO repair flash drive - an example of the kind of utility, you need is on the following link.

  http://Rufus.AKEO.IE/

  Kind regards

  DP - K

• FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error

  I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.

  Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.
  I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable.  Tried the disc start recovery and orders bootrec quick functions.
  Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?

  Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.

  Hard drive test - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• DELL INSPIRON N5050 STARTUP FAILURE WITH CODE STATUS 0XC000000F

  Turn on the laptop, pass the dell logo. Then, it goes into a strange screen:

  Windows Boot Manager

  Windows could not start. A recent hardware or software change might be the cause. to solve the problem:

  1. Insert your windows installation disc, and then restart your computer.

  2. choose your language settings, and then click "next".

  3. click on "repair your computer".

  If you do not have the disk, contact your computer manufacture or to help system administrator

  status: 0xc000000f

  Info: the boot selection failed because a required device is accessible.

  I tried every option after I pressed F2, F8 and F12. It does not work, all find themselves with the sameinformation.

  I have a very important project in my laptop. I need my system to the top ASAP.is it a simple solution for this problem. My guess is that I need an insta

  set disk from dell and I think that it does not guarantee recovery. I don't know how much it will cost to get the laptop disc.my is just out of warranty(5/1/2013). I asked once for a dell installation disk when it is still under warranty, but dell never give to me.it is too disappointed. Someone here can help me with this question or make me a free as soon as POSSIBLE installation disc. If dell is unable to solve this problem, I swear to God, I will not buy any dell product.

  Hi jessonchien

  I suggest to check the system into safe mode with networking, follow the listed below as follows:

  • Restart the computer.
  • Press on during startup until the Windows Advanced Options menu appears.
  • Press with networking Safe Mode is highlighted, and press .

  In the issue persist in safe mode so would run you dell diagnostics running on the system, press to the initial Dell logo screen, then select Diagnostics from the boot menu.

  You can ask to drive the operating system from the link below:

  http://Dell.to/XBcVDN

  Answer please if you have any other questions.

  Thank you & best regards
  Prateek K
  #iworkfordell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• status: \boot\bcd 0xc000000f

  Hello

  I tried to set up the factory configuration, after having instabilities in the system, using the 4 DVD I've burned, but at the end of installation, I received the following message:

  File: \boot\BCD

  status: 0xc000000f

  Info: an error occurred trying to read the boot configuration data.

  I have a pavilion hp DV6 notebook, windows 7 is installed.

  Help, please.

  Hello

  I would say that the next step would be to exclude a potential problem with the recovery discs.

  There is a simple way to check this if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to the retail version accurate, you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO on a CD blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the activation key is located on the underside of your laptop when asked and once installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM Windows installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All additional drivers you need for your specific model is found from here.

  Kind regards

  DP - K

• Satellite L300 and error 0xc000000f

  I had the windows did not start error. A recent hardware or software...
  Say that you need to repair Windows installation disc.
  File: \windows\system32\winload.exe
  Status: 0xc000000f
  Info: the selected entry could not be loaded because the application is missing or damaged.
  Enter = continue
  ESC = exit

  I can't start mode without failure or something like that. I have not upload anything recently or change anything. Just tried to start one day and got it. I have only the option of F2 or F12

  OK, so I used my restore disc and went through "windows is loading files" up to the end of and then Microsoft corporation. It is not even asking for the language. Then nothing. Black screen with white cursor. Nothing helps. The cursor moves when controlled with mouse pad, but that's all. I can't use ctrl + alt + del or something else to get out. Please can someone help me with this. I have some documents that I'd rather not see it go. Are there other options apart from resetting to the factory settings?
  Thanks in advance for your help.

  > Are there other options apart from resetting to the factory settings?
  If I've understood your right to post you cannot install recovery image.
  What happens when you press F8 at startup? You can enter advanced startup options?

  If you have some important documents stored on the HARD drive and then connect as another external to the other PC then you can all copy them to the PC.

  What you can do?
  Try to get somewhere Microsoft installation disc to see if the same problem occurs again. If you will not be able to launch the installation of operating system with this disc of facilities I assume that HDD is troublemaker and you must test the features with the other.

  Maybe some friend of you has a 2.5 HDD so you can use it for testing purposes.

  In the end, I have to say that most strange thing in this whole thing, is that you cannot use same disc of recovery for the installation of the OS. For me it is the best proof that there must be some hardware problem.

• 0xc000000f, Windows cannot load the NLS being missing or corrupt data.

  Hello

  I tried to install a Japanese game on my PC, and I had to change the system locale to Japan (in Japanese). However, after the reboot, I get this error:

  Windows error recovery

  Windows could not start. A recent hardware or software change might be the cause. To resolve this problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  Status: 0xc000000f
  Info: Windows failed to load the NLS being missing or corrupt data.

  I can't even start windows in Safe Mode or other startup options. When I tried to boot from my Windows disc, I can only install Windows, with no other options.

  Thanks for help.

  Edit: I downloaded a virtual recovery disk for Vista and was able to solve my problem. Thanks for your help.