Strange language during changes?

Similar Questions

• After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation I choose English as my tongue so have no idea what's going on

  After windows update, I tried to reinstall acrobat adobe XI that installed fine, but when I opened it, the language had changed into a kind of Cyrrilic alphabet. Weird! During installation, I choose English as my tongue so have no idea what's going on here. Any experience with this? I used the same dvd that when I initially installed so should have come out as done original installation in ' English.

  Hi rebrad999,

  Please see the following KB doc on this topic: error 'incompatibility of language between the entered serial number and language of launch Acrobat | Windows

  If the problem persists, I recommend you to uninstall acrobat and reinstall it after you download it from the following link: download Acrobat products | Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• my language has changed between English and symbols, and I do not know how to change back

  my language has changed between English and symbols, and I do not know how to change back

  Hello Joe Barton,

  Have you tried to change the display language, from the link above?  Alternatively, you can try to perform a system restore, if it happened recently.  Did you do a full scan with your antivirus software and ran all the malware removal?

  Please let us know status.

• HP LaserJet Pro M201dw: Language must change to HP LaserJet Pro M201dw

  I have a HP LaserJet Pro M201dw and I need the language has changed from Italian to English

  Could you please send the link for the fix.

  Thank you

  Try the factory base reset of the control panel:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03296578

  You will need to translate Italian a little bit to do the job, but it shouldn't be too much words to translate.

  If this does not work, you need to consider raising the steps to cold/NVRAM reset the printer.  Reset at this level usually destroys the default language, but is not always necessary.

• Strange problem: colors changing after the backup

  I have a rather strange problem. Change the colors to a couple of my documents. At first, I thought they saved wrong, but I realized only changes when I download them (and not all uploader seems to change colors either) it also seems that if is performing mainly the purples and blues. In addition, it is not past with all my documents, just a handful of. I checked that the paintings are in the correct mode and all... I'm really at a loss for words here. Any ideas?

  

  CMYK should only be used when you print on separations (for example, a press on a large scale for the production of magazines, etc.). Printing services generally use the inkjet and laser printers, you should use RGB. The rule here is to always use RGB unless specifically requested to use CMYK.

  Once you save this file as a JPEG, it will be RGB. And RGB and CMYK have ranges of different colors, so a few colors that can produce the other can't and vice versa.

  In addition, this JPEG is no label, there is no attached profile that allows devices don't know how to set the colors. This means that all devices will just give him a better idea and you never know what you will end up by with.

  Then, use RGB and save the image with a profile.

• I accidentally selected the wrong language during the whole upward.  How can I change so I can complete the installation?

  My finger slipped and I can't understand how to start go back to choose English or complete the entire upward, so I can change it later.  Is there a way to start over?

  If you have not configured the Apple TV, you need to jump or enter anything for the implementation of the measures initially and back to these settings once you can read the menus in your native language.

  Press the "Home Screen" on the remote control to return to the home screen menu and locate and select settings (with the gear icon), select the option at the top of the page in the menu, then scroll down and select the second to the last option on the next screen, that shows a list of languages, select yours. Apple TV needs to restart to change the language and ask you to confirm this, when it's this select the option at the top of the page.

• Change of language during the conversion from pdf to word

  Trying to pdf to word conversion, but the document is in Russian, and I do not have that language in the menu, is it possible to add it?

  Hi keirs32567513,

  Described below help page languages supported for OCR in Adobe export in PDF format (in the context of online Document PDF of cloud services).

  With the help of OCR in Adobe Reader PDF Document Cloud, export

  The desktop version of Acrobat Pro DC provides the OCR function, called "recognize text."

  

  (Tap/click on the picture above to enlarge)

  Unfortunately, none of them are Vietnamese.  Sorry for the inconvenience.

  I recommend searching the Internet with keywords such as 'Rock' and 'Vietnamese' of alternative solutions.

• How can win XP MCE 2005 restored in Chinese language, I change to English?

  I got my windows XP MCE 2005 of a disk partition on my laptop Asus A - 8J but recovery after that is in the language Chinese (maybe because it was bought in Taiwan)

  During my recovery, I think that the first page asks the language options, but everything is written in a Chinese language, how can I select the English language?
  Now everything is displayed in Chinese and I can get to the control panel > regional and language Option > language tab > Details button, but how can I change the language that everything is always displayed in Chinese.
  Please help to change display and the input to the English language.

  Hello

  The option for English on the language selection screen should be in English.

  During installation, you can select English in the locale.

  You can also change these settings in the control panel as well by going to the regional and Language Options:

  How to add and enable additional languages in Windows
  http://support.Microsoft.com/kb/177561

  If you can't navigate through the windows in Chinese then you should try the English selection during a new installation of Windows XP.

• Problem with the spell checker - check the spelling of my language has changed in French

  For some reason any my spellchecker began to act strangely and pick up every word (without a suggestion). Verification by means of tools, options, spelling I am amazed to see that the States of French language.  It is not a drop of water to the bottom of the list to change, this can help please?

  Could you be referring to Outlook Express and not Internet Explorer? (This forum)

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• keyboard language was changed after upgrade to 10.11.5

  After upgrading to El Capitan 10.11.5 I could no longer connect to my MacBook Air using the password. However, after a hard reboot, I could, but the computer will not accept my password, for example, the installation of an application. It would work only to restart the computer. Finally, I noticed that the keyboard language changed to English, which is probably why some characters my password was not entered correctly. Has anyone else had the same problem?

  To make sure that various keyboards are available for the connection, you can go to the prefs system/users and groups/connection options and tick the box to display the menu before when connecting.

• Problem of language during the recovery file

  Hey all,.

  I have a Satellite A300-15 b and I tried to recover the system with the recovery disk and windows. I ordered from https://backupmedia.toshiba.eu. The process has begun, it loaded the files and he came to the screen that I had to choose language to continue. Any language, that I chose it always returned the message:

  ERROR: Could not get a writing of the language of the INI file

  Article: [Commune]
  InstallCMD key
  File: E:\Setenv.ini
  Output...

  Someone who can help? I don't really know what to do.

  Hello

  The recovery image is not multilingual and if you ordered, for example, on the English language, you can install it on English only.

  Usually, when the language menu displays the default language is already marked. On this step doesn't change anything, just keep clicking OK.

• Set an incorrect language during installation on Satellite A200

  I bought a Toshiba Satellite A200. During start-up, I made a mistake.
  First the screen I chose French. Second screen that I would choose french once again, but as this is my first laptop, that I'm not used to the touchpad, I made a mistake and marketing was conducted in German. Actually on the screen:
  Country/region Deutschland
  Zeit und currency Deutsch
  Tastaturlayout Deutsch

  Is it possible to stop marketing and start again in french?
  I don't understand German, and everything must be in french.
  Thank you for the help

  Hello

  You can do the following:

  1 retrieve the computer and repeat the procedure, but this time done RIGHT and choose french.

  2. you can go to start-> systemsteuerung-> (something with Sprachoptionen 'regions-und')-> there you should be able to Exchange languages but I don't know how to do it because I have Vista just on English.

  Good luck

  Good bye

• is it possible to update service pack language to change my windows 7 English into Chinese?

  I'm going to buy a laptop in the States, where all machines are downloaded with windows 7 in English. I wonder if I can change to the simplified Chinese version? Forced to subscribe or it is free to download from micro Center? Thank you!

  Hi all

  I addressed the issue on my side.

  A Studio Visual C++ Redistributable 2008 installation was the problem...

  When he tried to install the language pack from windows update I got this error in the event viewer:

  The .cab file [FilePathFromMyVCRedist] is not a valid language module. The language module is possibly corrupt. Last error: 0 x 80070002...

  I uninstall this VCRedist and this updated time window was fine I saw the status of the installation.

  And now I can pass for french!

  Vianney

• Google play language has changed after the firmware update

  My xperia xa language is Turkish. After firmware update that he changed to English, how can I change to Turkish back...

  Solved after that reset sony pc phone app. thank you...

• Smartphones blackBerry app world my language has changed...

  My app World, the list of the category has changed language on me, I don't know how this happened or how to change it back... I contacted my service provider, but they told me to contact blackberry... I'm new to blackberry and do not know how to contact... Please help me

  So there... Since no one really answered me on this subject... I thought about it... I just uninstalled the BB app world, then reinstalled again... I was afraid to do this cuz I thought I'd lose the apps I had paid for, but I do not lose anything and it finally works again )