Stream HP laptop: recovery software

My PC says to reset but its pretty new, I want to know if if it resets will I recover my microsoft office 365? It has an activation of 1 year and Ive been active and installed it but only 2 months of year 1 activation has passed

Have you created a Microsoft Account and the password. If you log on to Office 365 account page and clear the old installation, then you are entitled to a relocation.

Tags: Notebooks

Similar Questions

  • Where can I find my new hp laptop laptop system software and recovery to open their Web site?

    Where can I find my new hp laptop laptop system software and recovery to open their Web site?

    1. I have install the hp bios system update and failed.

    2. the beginning of HP ENVY 17 laptop u011nr - displays the message "something wrong."

    3. then I do the restore point.

    4. once I did this, the PC can not correctly run windows 10. Has lost nearly 50% function.

    5 then, I run the recovery.

    6 the result is OP deaths.

    I invited, I need to reinstall all windows of the OP and all equipment control software.

    Where can I find my new hp laptop laptop system software and recovery to open their Web site?

    Hello

    Please use the last item on the following link:

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-notebook-PC-series/10862141/model/11992079

    or

    http://support.HP.com/us-en/mediaorder/HP-envy-17-u000-notebook-PC/10862141/model/11992079/softwareitem/900074-003/STEP1?SKU=W2K87UA

    Kind regards.

  • How to order or download the system recovery software?

    Hello

    Most HP laptops already have called the program "recovery manager" that is built into the laptop. This allows each user recover the laptop whenever they need to.

    Now, there are some situations where you can not use the program from the desktop or even during the boot.

    If this is the case for you, I'll post here how to order or download the system recovery software.

    This video is very useful for users who cannot access the recovery Manger in windows or during boot.

    I suggest, if you are unable to download the recovery image on a USB drive to call HP @8004746836. Order a recovery through HP disk might cost if you are no longer under warranty.

    THX

    Hope it will be useful.

  • Switch to the SSD with original recovery software?

    Hello

    I need help in the transition to an SSD. I just bought a desktop PC HP ENVY of h8-1400ew with Windows 8. I'm used to having a system SSD drive, so I would like to switch to him, but keep all the customizations of HP. Actually I'm thinkng to use the original recovery DVD or a partition, but after some research, it seems that during all the years moving to a disk different HARD was almost impossible if the size was smaller. I found someone to go into more detail on these forums and there was a light at the end of the tunnel, he said that the recovery software is able to do this, even if the new drive is smaller, as long as all hidden and recovery partitions mount the new drive. All this should therefore boild down to its size. What size is big enough.

    If anyone has found it's true? HP brought no changes to how it's all done in era of Windows 8? I don't want to shell out $200 to only get the error at the end of the process. Please notify.

    PS. I know there is a workaround solution that involves the cloning of the partition on the drive up, but I don't want to do because it will prevent the correct recovery in the fututre system will be ignore where the scores of recovery are and so on. For now, I would like an automated solution.

    Hello:

    You can see this post where a person has been unable to use a flash drive with the recovery of files on it to install from a HARD drive on a SSD from 120 GB to 500 GB related.

    http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/swapping-HDD-with-SSD-using-HP-recovery-media-for-new-laptop/m-p/2319793#M15213

  • NB550D - can't find Toshiba HDD recovery software

    Hello

    Several days ago, I bought a Toshiba NB550D netbook. He had Windows Starter pre-installed, but I wanted to try Linux. I installed Linux and, of course, left the recovery partition. Now, I would return for Windows.

    I would like to restore the software preinstalled on the hard drive, but I can't find the disk recovery software HARD Toshiba which could install on a newly installed Windows and restore the system from the hard drive. Where can I find it?

    I have a whole score necessary for recovery, nothing moves or deleted.

    Enormously grateful for the help
    Toshiba NB550D user

    Hello

    Toshiba HDD recovery software can be launched via the advanced version preinstalled Windows boot menu. In other words, this feature works with OS preinstalled only.

    Now you have installed another OS (Linux) and this means that you can start t HARD drive recovery option more. HARD drive recovery partition is not enough to do.

    Have you created a bootable USB key using the recovery media creator before installing Linux? If so, you can use this stick now to restore the original settings. If you don t have that stick you can order recovery media here:
    https://backupmedia.Toshiba.EU/landing.aspx

  • Linux data recovery software

    I have recentaly lost my data from my Linux operating system. I used Stellar Phoenix Linux data recovery software. This [recovery Linux | http://www.data-recovery-linux.com/] software retrieves almost of my data. Demo version of the software is free in which you can see the preview of recoverable data.

    Hey

    Thanks for the link. :)

  • Satellite A660 /question on preinstalled recovery software

    Toshiba Satellite A660 came with a preinstalled Toshiba recovery software I just wana know if I delete windows this backup will windows and all software with it or im I backup only the installed software and not the operating system.

    Thank you guys

    I agree with wsb123.

    The Toshiba recovery procedure will establish the specifications in the same State as the first day of the purchase. You will get all the drivers, software, tools, etc. of the means to return to the HARD disk

  • a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

    I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Windows Live Family Safety ruined my laptop Lenovo software!

    Windows Live Family Safety ruined my laptop Lenovo software!  It won't even turn on now!  I loaded web filtering toolbar Bing only and immediately put in the parental control settings, the machine starts randomly stop and failing to start properly so far: HE WON ' T EVEN POWER up!  I ' M FURIOUS!

    Hello

    I understand how frustrating. Generally, the software does not affect any material of the computer/laptop. If can still run your laptop on in any case, we recommend that you press f8 at start up and run it in safe mode. If you were able to run in safe mode, we recommend to uninstall Windows Live Family Safety to isolate the cause of this problem. You can see the link below for how to do it:

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    If you were unable to complete the steps above, then we recommend that you contact your laptop manufacturer for more help. It is possible that there is a problem with the hardware itself (hard disk, memory, battery, etc.).

    Thank you!

  • remove the hp recovery software

    I have the HP Envy 700 desktop computer. It comes with the hp recovery software. I need to remove it so that can run other third party backup software

    correctly. I use ACRONIS software, but it does not recognize the C partition. When I run HP recovery, there no uninstall option. No idea how to remove it?

    If you have Windows 8 as an OS, you must use Acronis True Image 2014 a paid version, earlier versions do not work in Windows 8.  I use Acronis myself.

    Acronis you select disk and dos Partition and from there, you select the partitions that you want to back up.  You should see the C: drive.  You don't have to remove the recovery partition.  Just the image of the entire hard drive.

    You can also use Macrium Reflect (free) to get the same result and easy to use.

    If you have any problems, look at the user manual, or ask your question here.

  • I just installed on my laptop encryption software; It asks me to log on to Windows XP. I don't remember my windows username.

    I just installed on my laptop encryption software; It asks me to log on to windows.  I don't remember my windows username.  Currently, I am in major trouble since it is the laptop I use for my business.  Whenever I try a different username and password for the encryption software adds logon times.  My current delay is 5 minutes.  Can someone help me?

    * original title - need quick help *.

    Hi Docfun_567,

    ·         Do you have what encryption software installed?

    You may need to contact the software vendor to learn more about it.

    See also:

    How to connect to your Windows XP-based computer if you forget your password or if your password expires

  • Usb drive data recovery software

    Suggest me a data recovery software that can help me get my files lost from my USB. Cheap and best is my expectation!

    Try these, they are free:

    http://www.SnapFiles.com/get/Recuva.html

    Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

    http://www.SnapFiles.com/get/DiskDigger.html

    See you soon. Mick Murphy - Microsoft partner

  • HP envy 700-570na: Y at - it to hp to recover 10 to 8.1 Windows recovery software?

    Is there a recovery software I can buy to recover my windows system Windows 8.1 10 which is what I got when I bought the pc, but it went straight to do the update to windows 10 please let me know.

    You are welcome!

  • I see the "H" disk recovery software How to activate?

    HP Compaq 6000

    Windows 7 Pro

    Recovery needs

    a virus (deleted) will not always run right.

    I see the "H" disk recovery software How to activate? Everything has been preloaded and no disk came with it.

    Stated that if there was a software problem was in recovery drive.

    Hello:

    Start the PC and at the beginning of the HP welcome screen that appears, press the F11 key to start the recovery process.

    Follow the prompts to recover PC to factory State.

    If this does not work, then you will need to order a set of HP recovery disks by calling 1-800-334-5144.

    Tell the customer service rep to order a set of fast food for your PC disks.

    You will need to provide the model # and serial number.  The charge will be $10.00.

    That's if the model you have the HP 6000 Pro desktop version.

    Paul

  • free sc card recovery software

    Microsoft has a free SD card recovery software utility, or is there a product of good "shareware".

    MS isn't everything, google/bing will produce many results, paid for programs usuall to try before you buy. But if the card is not recognized I wouldn't hold too much hope.

    And if you want to spend the money http://www.krollontrack.com/data-recovery/

Maybe you are looking for