stuttering soundtrack after use of 7/8 hours

Similar Questions

• Satellite A60 stops automatically after about 1/2 - 1 hour of use

  Hello

  My PC automatically stops after about 1/2-1 hours of operation.

  Can you help me?
  Thank you.

  Hello

  Sounds like overheating
  Have you noticed a higher temperature?
  High temperature may affect the pieces of equipment like the CPU, RAM, GPU

  What do you think of this?

  The A60 is a little old, and I think that there could be dust inside checking the fans If you can remove the dust using a jet of compressed air.
  This should help to decrease the temperature.

• I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

• the share button don't work and need to leave the app after used

  the share button does not work and I need to force quit the app after used

  Any individual plugin or all of them?

• After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm before closing

  After using groups of tabs earlier today, now whenever I close FF with more than 1 open tab, FF don't ask me to confirm prior to closing. FF always asked me to confirm in the past and no settings have been changed before you try tab groups. Then when I open FF it again all the tabs I had open are still there. I tried refreshing FF and erase history, but that did not work. It's almost as if FF think windows and tabs I have open are a group of tabs, and he won't let me get rid of this group. How to stop groups of tabs now that I have them? Or is there something else? None of this was going on until this morning, I played with tab groups. I was curious what it was - it's going to make me kill one of these days lol.

  Note that using "show my windows and tabs from last time" as the start setting will also prevent Firefox to display an alert when you close the window.

  • https://support.Mozilla.org/KB/Options+window+-+General+Panel

• Trackpad unusable after using the Wacom Tablet

  After using my graphics tablet pro Wacom Intros to edit images, the trackpad becomes unusable. Even when not frozen it will not properly work without a reboot. This happens every time, so it becomes a bit of a drag.

  I use an iMac of mid-2011 and OSX 10.11.4.

  Would like to know how this can be corrected.

  Post edited by: added gPhot wacom device description

  The tablet pen and wacom are known causes of interference.   Move them well away from your computer and try again.   With no improvement, move them temporarily out of the room and try again.   You need to establish that it is the culprit.  Once it is proven, you will need to find a way to work the problem goods because you can not blame the system for causes of interference.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• RILD eats the battery after using my music

  Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

  Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

  I'm closing this thread to keeos organized things.

  You can often find answers and avoid the double post if you use the search at the top of each page.

  here is the link to the current thread.

  Thank you

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Is it better to put the computer in mode 'sleep' when using not for an hour or so?... or turn the system off

  Is it better to turn off the computer if only to use it for an hour or so?  orput it in 'sleep' mode I have Windows 7

  On Sunday, February 26, 2012 19:39:20 + 0000, Anthony.J wrote:

  Is it better to turn off the computer if only to use it for an hour or so?  orput it in 'sleep' mode I have Windows 7

  This question is asked on a regular basis and collects generally all kinds of
  fervent responses on both sides of the issue. Some people never
  turn off their computers, saying their deactivation can cause the
  material to fail early. Others turn them on and off several times
  every day, to save electricity.

  My opinion is that it doesn't matter much anyway, and you should
  do what suits you best. Personally, I turn on once a day, when I
  get up in the morning and turning off the power once a day, when I go to bed at
  night.

  Ken Blake, Microsoft MVP

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.