Support connection of 10 GB
Hello
We are looking to move from our current 5 1 gb connections per host to 2 GB 10 connections per host. Did anyone done this before? Also to support this type of connection?
I dedicate 2 10Gb network cards for iSCSI and use your NICs 1 Gb for everything else.
Tags: VMware
Similar Questions
-
Pavilion 500-366: sata to esata support connection
On the motherboard sata port works fine with a sata drive (i.e. 3.5 "HD) connected, but does not work when I connect an esata bracket for use with an external hard drive. I tried two different sata ports. I did not have this problem on other motherboards. Support connects to the motherboard via a regular sata cable port. I'm sure it's a simple solution, but little aid is necessary and would be appreciated. Thank you.
Keep the external hard drive powered and connected eSata cable. Restart the system.
Suspect that Hot-Swap is not active.
-
When I'm in split mode, I can't see my pictures. I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2. Is there a setting in DreamWeaver, I can change to take account of my images be seen? Then I see mode live view but not in the edit view. I use DreamWeaver CS5
It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.
As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.
Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.
-
Looking for an Apple support-connected to COTEQ?
Surf the internet with I-phone. EU security alert to contact Apple technical support with a phone #. Did not trust #, then sought support from Apple. Found a link that said Apple Tech Support and was connected to the COTEQ. Said that they are under contract to Apple technical support. Anyone have this experience?
It's a scam. They have nothing to do with Apple.
-
Windows 8 and/or Surface Pro supports "connected standby mode?
Hello
I just read that ' a Windows 8.1 feature called connected standby mode, which allows computers to be put into mode 'sleep' and wake up instantly, is available today than in the 32-bit version "is the reason why" first Trail Bay tablets will use only the 32-bit version of Windows 8.1 ".»
But if this is true, don't would then not it means that the Surface Pro running Windows 8 Pro 64 bit is therefore unable to use "connected pending"?
I didn't notice the Surface Pro or the W700 Acer having problems coming out pending, then perhaps 'connected standby mode' is another type of sleep? Can someone explain to me. The "instant on" feature (the case of illusion, or for real) is what tablet users and so Windows 8.
Our company has been delaying the replacement of our laptops Windows XP until the release of 2.4 GHz, 64 bit, 8 GB RAM, SSD 256/512, 4 G/LTE Mobile Broadband Bay Trail devices come to market. As a benchmark, we are looking for a device (/ Ultrabook/Tablet laptop computer) that would be able to effectively deliver business applications, for example Adobe Photoshop, MS Powerpoint. 2 to 4 GB of RAM will not be enough.
It will be Haswell devices without a fan, we have to buy these, even if they are much heavier and have reduced the battery life because it seems that it would not be until 2015 that see us peripheral Bay Trail capable business, see the articles below.
http://www.TomsHardware.com/news/Atom-Bay-Trail-Valleyview, 19244.html
Mobile Atom SoC stay 32-bit at least until 2015
Somewhat surprising is the notion that Intel will keep its Silvermont Atom processor as a 32-bit platform until at least 2014. Customers who need the ability of 64-bit Atom will have to the Centerton Atom-S the microserver-based processor. It is not known if the successor of Silvermont, the 14 nm Airmont, will move to 64-bithttps://www.NetworkWorld.com/news/2013/091213-Windows-81-tablets-with-64-bit-273770.html
Buyers looking for a tablet with the new Bay Trail Atom from Intel chip and a 64-bit version of Windows 8.1 will have to wait until early next year.
Intel executives said Wednesday the first Trail Bay tablets will use only the 32-bit version of Windows 8.1, despite the support of 64-bit on the chip.
Tablets with OS 32 bit have a limit of 4 GB of DRAM memory, while 64-bit can actually support 512 GB. Most of the first tablets Trail Bay with Windows 8.1 will not more than 4 GB of memory, said Steve Smith, Vice President and Director of development for the tablet at Intel.
"We have the capacity, now it's a matter of when a system of consumption needs, it's probably somewhere in the future, I would say that a few generations away ', said Smith.
The reason is the limitation in the software of Microsoft, said Nathan Brookwood, principal analyst at Insight 64. A feature of Windows 8.1 and wake up instantly, called Eve connected, which allows computers to be put into mode 'sleep' is available now than in the 32-bit version.
Microsoft adds functionality to the 8.1 Windows 64-bit, and it will be available in early 2014.
Intel also does not feel 64-bit is required on consumer shelves, even if he knows what IT managers want 64-bit compatibility on all PCs and mobile devices in the enterprise.
Intel is developing a smart Tablet Trail separate Bay scheduled for 64 bit versions of Windows 8.1, and the processor will be available in the first quarter of next year, said Chris Walker, Director general of tablets at Intel Mobile Communications Group.
2 Surface Pro supports NOT connected to sleep, even if it uses the "Haswell" chip, which supports this mode.
There is a world of difference between standby connected and traditional modes of 'Sleep' and 'put to sleep '. Basically, connected to standby mode, the system really is, but requests are suspended for most. See here for a Microsoft document that gives an introduction connected mode standby.
I don't know why the 2 Surface Pro does not deliver sleep connected; I've seen several data, possible reasons for why this might be true:
- The 64-bit Windows 8/8.1 version does not support it.
- It is necessary that the material to be a fanless design (Surface Pro 2A fans).
- It is necessary for the design to have TPM (Trusted Platform Module) version 2.0 (Surface Pro 2A version 1.2)
Whatever the reason (and it can be one or more of the above), it is disappointing that a product of the so-called phare does not support the feature.
-
Help! Unsuccessful update apps &; desktop support connection
I can't update my apps in the cloud creative and when I want to begin a conversation with Adobe support Office I can not connect
Hello
Please refer to the threads below where this issue has been addressed:
https://forums.Adobe.com/message/4991889#4991889
Kind regards
Sheena
-
BlackBerry Smartphones support connection deleted icon can't get it back
I have a user who has removed her manage connection icon and I can't find a way to recover. I rebooted the BB and it appears after the relaod but when I set up the device for the user icon disappears again. He is unable to manage without her connections. the device and BES 4.1.5 is BB8820 with ATT service. The theme is the AT & T default screen. Any help?
If you replace a different theme is the icon still missing? You can try to restore your default theme. If you go to Options | Theme, click the menu button and choose Reset default theme
-
Are supported for FC connected tape drives?
Hello
Just to clarify with you guys, makes vSphere what ESX/ESXi 4 supports connected FC
tape drives?
My understanding is that in CF VI3, connected tape drives were not supported, but correct me if I'm wrong.
Thanking you in advance,
Saludos,
Jose Maria Gonzalez,
Founder and president of JmGVirtualConsulting.com
-
See http://www.JmGVirtualConsulting.com for official Vi3 and vSphere Council
See http://www.josemariagonzalez.es for my blog on VMware with tips training
See http://www.Twitter.com/jose_m_gonzalez for a few tweets
VMware vExpert 2009
AutoR del libro 101 secrets of VMware vSphere
AutoR del libro VMware ESX VMware VCP Hecho Facil y
-
If you find this or any other answer useful please consider giving points by checking the answer useful or appropriate.
! http://feedproxy.Google.com/ElBlogDeVirtualizacionEnEspanol.2.gif!
Hello.
' ESX/ESXi does not support FC connected. tape devices '-page 29 of the Guide of Fibre Channel SAN Configuration
Good luck!
-
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra
After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.
But Google chrome works well.
So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:
2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection
-
A200_10X modem fails to connect via the wheel upwards
The laptop was purchased from the Kingdom of Saudi Arabia and is used in India.
The modem does not support connections to call.Hello
I think that you can not use the dial-up modem because you are in another country.
Please remove or reconfigure the region Modem selection utility.
This can be found in programs-> Toshiba-> network-> Modem region SelectGreetings from the Germany ;)
-
All current machines will support connected standby mode in windows 8? Eve connected allows one machine to sleep briefly turns on, check the updates (IE twitter, facebook, emails), and then to go back to sleep. It would be cool to beable to close my W530, out for a bit and come back and see I'm new e-maisl while the machine was asleep.
No current modles, the first devices to appear will be tablets and ultrabooks.
Intel has yet to release all of the chips that support it.
-
Hi all
Downloaded hp support connects ok then stops any ideas
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the laptop.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
-
15 - r110na: connected standby
This laptop has moderator drivers installed as part of the Windows 8.1 desktop activity. These drivers allow standby connected. I don't know if this model of laptop supports connected before. Anyone know please?
Hello
I doubt, it does not support this, but you can check by entering a command prompt
powercfg /AVAILABLESLEEPSTATES
Kind regards
DP - K
-
Problem with connection diagram - BNC-2110 to PCI 6280
Hello
I want to read analog input using BNC 2110 as an interface connected to the PCI-6280. In the first step I want to use the Signal Express to see only the data, but when I choose one of the input and then string I want to see the connection, I get this message:
------------------------------
Connection scheme tool does not send the accessory on the connector 0 of your device:
BNC-2110Please select one of the following accessories to display the supported connection diagram:
Support for accessories:
SCB-68CB-68LP
TBX-68
CB-68LPR
SCC-68
------------------------------
What should I do in this step?
Hi MiladAk,
There is this sentence in the Manual "the BNC-2110 is only intended for differential analog input signals. The 16 channels HAVE on PCI-6280 are mapped to 8 connectors BNC AI0 - AI7 on BNC-2110. HAVE [n] with I [n + 8] represent a differential channel. This means that if you select channel differential AI0 in Signal Express with Terminal configuration it will also use AI8. These two channels is represented by a single BNC connector (connection central driver is positive = AI0, negative connection is shielding = AI8).
Best regards
CaravagGIO
-
Unable to connect to the internet after the removal of system tool virus
A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware. On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files. He got rid of the icon in the system tray. I also then removed the Malwarebytes software. Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking. Finally, who has stopped working. The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.
I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes). When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router. These devices are, however, both the work that there are other computers connected to them and they work.
I tried Microsoft solutions are answers to a similar question. Unfortunately, none of them worked in my situation. They have been in accordance with the following:
No doubt...
What happens when you try to connect to the Internet?
What is your version of XP, the version of Service Pack and IE?
What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?
Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues). I would get my infected system and try the procedure you used to see how it works.
If, when you try to connect with Internet Explorer, you see something like:
Internet Explorer cannot display this webpage
The most likely causes:
You are not connected to the Internet.
The Web site encounters problems.
There could be a typing error in the address.We will check your network connection properties.
Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
Click Start, run and enter in the box:Inetcpl.cpl
Click OK to start the network settings of Internet control panel applet properties, connections.
Or, in Internet Explorer click on tools, Options, connections, LAN settings.
These settings control your Internet access for all browsers.
On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.
Automatically detect the setting checked =
Use the automatic configuration script = unchecked
Use a proxy server for your LAN = not checkedMake changes, then click OK, OK to save the settings.
Check your settings for how your network adapter gets its IP and DNS settings. On most home systems, these parameters must be defined for the system will get the settings automatically.
If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.
Click Start, settings, Control Panel, network connections, and then select your current network connection.
On the general tab, click Properties.
In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.
In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically. Select the following two options:
Obtain an IP address automatically
Get a DNS server address automatically
The rest of the options on the screen should then be grayed out/not available.
Make changes, then click OK, OK to save the settings.
Restart your computer and test your connection.
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish.
Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew. This is also not rectify the situation.
For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:
Summary of the system:
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
System FIELD name
System manufacturer Dell Inc.
Dimension of the model 8400 system
System Type X 86-based PC
Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
A04 BIOS Version/Date Dell Inc., 10/01/2005
SMBIOS Version 2.3
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
CHAMP\steve user name
Eastern Daylight Time zone
Total physical memory 1 024,00 MB
Available physical memory 534,65 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Swap file space 2.40 GB
Paging file C:\pagefile.sysNetwork card:
Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
Adapter Type Ethernet 802.3
Product Type Broadcom NetXtreme 57xx Gigabit Controller
Installed Yes
ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
Last reset 23/03/2011 14:51
Index 1
B57w2k service name
IP 192.168.1.102
IP 255.255.255.0 subnet
Gateway IP 192.168.1.1
Active Yes DHCP
192.168.1.1 DHCP server
DHCP lease expires on 2011-03-24 15:22
DHCP lease obtained 23/03/2011-15:22
MAC address 00:11:11:CB:96:8 D
0xDCFF0000-0xDCFFFFFF memory address
IRQ channel, IRQ 16
Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
Name [00000002] RAS Async adapter
Card type not available
Card product Type RAS Async
Installed Yes
PNP ID of device not available
Last reset 23/03/2011 14:51
Index 2
Service name AsyncMac
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Name [00000003] Packet Scheduler Miniport
Adapter Type Ethernet 802.3
Product Type Packet Scheduler Miniport
Installed Yes
ROOT\MS_PSCHEDMP\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 3
Name of the service
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 00:11:11:CB:96:8 D
Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
Name [00000004] Wan WAN (L2TP) Miniport
Card type not available
Product type Wan (L2TP) WAN Miniport
Installed Yes
ROOT\MS_L2TPMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 4
Service name Rasl2tp
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
Name [00000005] Wan WAN (PPTP) Miniport
Adapter Type wide area network (WAN)
Product type Miniport Wan WAN (PPTP)
Installed Yes
ROOT\MS_PPTPMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 5
Service name PptpMiniport
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 50:50:54:50:30:30
Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
Name [00000006] WAN (PPPOE) Miniport
Adapter Type wide area network (WAN)
Product type WAN (PPPOE) Miniport
Installed Yes
ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 6
Service name RasPppoe
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 33:50:6F:45:30:30
Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
Name [00000007] Direct parallel
Card type not available
Product Type Direct parallel
Installed Yes
ROOT\MS_PTIMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 7
Service name Raspti
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
Name [00000008] Wan (IP) Miniport
Card type not available
Type of product (IP) WAN Miniport
Installed Yes
ROOT\MS_NDISWANIP\0000 PNP device ID
Last reset 23/03/2011 14:51
8 index
Service name NdisWan
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
Name [00000009] Packet Scheduler Miniport
Adapter Type Ethernet 802.3
Product Type Packet Scheduler Miniport
Installed Yes
ROOT\MS_PSCHEDMP\0001 PNP device ID
Last reset 23/03/2011 14:51
Index 9
Name of the service
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
16:4 MAC address: 20:52:41:53
Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
Network adapter 1394 name [00000010]
Adapter Type Ethernet 802.3
Product Type 1394 network adapter
Installed Yes
V1394\NIC1394\9103858423C01 PNP device ID
Last reset 23/03/2011 14:51
Index 10
Service name NIC1394
IP address not available
IP subnet not available
Default IP gateway not available
Active Yes DHCP
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 52:df:35:27:59:E5
Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
Name [00000011] Miniport Wan WAN (ATW)
Adapter Type wide area network (WAN)
Product type Miniport Wan WAN (ATW)
Installed Yes
ROOT\NET\0000 PNP device ID
Last reset 23/03/2011 14:51
11 index
WANATW service name
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
00:03: 8A: 00:00:15 of MAC address
Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
Name [00000012] Symantec Network Security Miniport
Adapter Type Ethernet 802.3
Type of product Symantec Network Security Miniport
Installed Yes
ROOT\SYMC_SYMIMMP\0000 PNP device ID
Last reset 23/03/2011 14:51
12 index
Service name SymIMMP
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 00:11:11:CB:96:8 D
Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
Name [00000013] Symantec Network Security Miniport
Adapter Type Ethernet 802.3
Type of product Symantec Network Security Miniport
Installed Yes
ROOT\SYMC_SYMIMMP\0001 PNP device ID
Last reset 23/03/2011 14:51
13 index
Service name SymIMMP
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
16:4 MAC address: 20:52:41:53
Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)Network Protocol:
Name MSAFD Tcpip [TCP/IP]
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 16 bytes
Message size maximum 0 bytes
Message Oriented No.
Minimum address size 16 bytes
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports shipped data Yes
Supports graceful closing Yes
Supports guaranteed bandwidth Yes
Supports multicast No.
Name MSAFD Tcpip [UDP/IP]
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 16 bytes
63,93 Message size maximum KB (65 467 bytes)
Message Oriented Yes
Minimum address size 16 bytes
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast Yes
Name RSVP UDP Service provider
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 16 bytes
63,93 Message size maximum KB (65 467 bytes)
Message Oriented Yes
Minimum address size 16 bytes
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption Yes
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast Yes
Name RSVP TCP Service provider
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 16 bytes
Message size maximum 0 bytes
Message Oriented No.
Minimum address size 16 bytes
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption Yes
Supports shipped data Yes
Supports graceful closing Yes
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.WinSock network:
File c:\windows\system32\winsock.dll
Size of 2.80 KB (2 864 bytes)
Version 3.10
File c:\windows\system32\wsock32.dll
Size 22,00 KB (22 528 bytes)
Version 5.1.2600.5512 (xpsp.080413 - 0852)Summary of Internet Explorer:
Version 8.0.6001.18702
Build 86001
Ask the path C:\Program may Explorer
English (United States)
Active printer Dell AIO Printer A920, winspool, Ne04:
Level of 128-bit encryption
Disabled Access Manager
IEAK install notInternet Explorer Versions of files:
Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
iecont.dllnot available not available not available not available
iecontlc.dllnot available not available not available not available
Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft CorporationInternet Explorer connectivity:
Dial connection preference never
LAN settings
AutoConfigProxy wininet.dll
AutoProxyDetectMode disabled
AutoConfigURL
Proxy disabled
ProxyServer
ProxyOverride
America Online
AutoProxyDetectMode disabled
AutoConfigURL
Proxy disabled
ProxyServer
ProxyOverride
Internet programs to use connection not available
Maximum attempts 10
Waiting between retries 5 sec
Disconnect idle 20 min time
Autodisconnect disabled
Modem Intel(r) 537EP V9x DF PCI Modem
Remote access PPP server
Connect to the network
Enable Software Compression Yes
Would require no encrypted password
Require no data encryption
TCP/IP network protocols
Use server assigned IP address Yes
The 0.0.0.0 IP address
Use server assigned NameServer Yes
Primary addresses DNS name server: 0.0.0.0
Secondary DNS: 0.0.0.0
Primary WINS: 0.0.0.0
Secondary WINS: 0.0.0.0
Use the Compression header IP Yes
Use the default gateway Yes
Name of the script fileYou have any ideas that could help me find an internet connection? Thanks for any help.
The removal of the virus seems to have taken some required system files. See if the System File Checker helps. Click Start > run and enter in the field open.
sfc/scannow
Press ENTER. The System File Checker must detect the missing necessary files and put back them. If this does not work, use a system restore point from before you were infected. If this does not work, get out of your XP installation diskettes.
Maybe you are looking for
-
This is ridiculous.I can't access my Bank, Facebook or Twitter for weeks with Firefox, how do I fix this annoying problem?I have to switch to another browser to access these SITES VERY COMMON?
-
Message "Safari cannot find the server.
In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time. Is there something funky
-
High temperature CPU on Satellite A215
Hello My Satellite A215 is 3 months old. I use coolfan 4.33. and my temperature is 89 degrees now... This is not normal. How is that possible? What should I do?
-
Change a message not updated with new message corrected even on the last update of Skype
When you edit a message, Skype is not updateing with the corrected version of the message. It was happing in the previous and updated versions to current day. Few people in my organization have reported this as well. Any ideas? Thanks in advance
-
iPhone 6 showing the accessory is not supported
I have an iPhone 6 when I try to load it says that the accessory is not supported and I use the original cable Apple. I can not load unless I turn the iPhone to let in charge. I need someone help me to solve this