Surface Pro 128GB - restore/Reset does not see partition recovery (broken)

Similar Questions

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• system does not see the hard drives as P6000 Windows 7 Pro 64-bit

  PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.

  Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%

  Now the system does not see the drive, but he sees no RAM, etc.

  Anyone know what causes this?

  Can what information I give to help troubleshooting?

  Thank you!

  Hello:

  Try resetting the CMOS.

  If this does not work, I would say that the drive controller in the motherboard is dead.

  Clearing CMOS

• Satellite Pro M70 does not see HARD drive sometimes

  Help me!

  My computer does not see my hard drive but see Installer and another computer.
  My hard drive is working and I put the new drive hard but computer does not see.
  And when I install XP on the computer I can see HDD format during the installation.
  And when prawns my computer I do not see the HARD disk again.

  Help me please

  Hello

  I think that it s a HDD issue naturally it s really strange that the HARD drive is different sometimes and sometimes it s is not visible, but I doubt that it could be software related issue. That's why I think that it s a drive HARD and in my opinion, you should check if other HDD SATA runs correctly.

  Good bye

• HP 13 X 2 Split does not see the Micro HD card

  I got no problem with Micro HD card.  I use it to back up my work.  All suddenly the computer does "not see" it.  I tried to get out, but it does not "Spring".  Two part question, how do you remove and reinsert the card.  Usually, the map is to push and it comes out for the withdrawal.  Secondly, there is a setting that needs to be reset.  No changes have been made to the system.  The card just stop working.

  Windows 8.1

  Processor Processor Intet Core i3-4020Y @ 1.30 GHz

  Installed memory 4.00 GB

  Process system Type 64-bit x 64

  Pen and touch: Ful window Touch support with 10 points of contact

  Hey @Sugarwood ,

  Welcome to the HP Forums!

  If the card was already working the first thing that we should try is a system restore. A system restore back the PC to an earlier date without deleting your personal files. It will however updates to software and the driver of the room, uninstall any software recently installed after the date selected.

  Do to run a system restore, please see the following guide: use Microsoft System Restore (Windows 8). Try to restore to be for it started and let me know if it works.

  To remove the microSD card: you are right. Based on the microSD card should eject as if spring loaded.

  Thank you!

• Toshiba still WT8 - restore procedure does not work

  Hello

  I recently bought a Toshiba still wt8 with 2013 preinstalled office student.

  The desktop application will not install with different messages about problems arise.
  the last message says that it can not download because it is not connected to the internet, even if it is

  In the following advice on the setting of the installation of various forums, I now have a machine that needs to be reset.
  The road to restore installed does not work because it says that the files are missing.

  Ive created a recovery disk (possibly after you buy a micro USB key).
  but now when I try to use it, it indicates the recovery drive is not valid.

  I've had the unit for four days now and I have yet to be able to use for anything other than making circles of frustration.

  Can someone help before I completely lose my sanity?

  Thank you
  Nick Chablis

  Hello

  Usually you have two options to restore the system.

  (* 1) * you will need to create a recovery media and could use this recovery media to restore the system
  (* 2) * you can restore the software preinstalled from the recovery partition

  (* 1) * before using the recovery media (USB flash memory stick), it must create a. The recovery image is stored on the dedicated recovery partition. And can be copied to USB flash memory by following the steps.
  -Turn on tablet and allow it to load the Windows OS as usual
  -Insert the USB micro-USB port (do you need a micro USB cable USB converter) tab (under System Windows Apps view) Control Panel
  -tabs and system security-> action center-> recovery-> create a recovery disk
  -then you must follow the instructions on the screen to complete the recovery media

  To recover the system USB flash stick insert. Then put ON the table (charm settings-> power bar-> stop) after the tablet was turned off the POWER, wait 10 seconds, then press and hold the power button / stop and the volume button up until the start menu is loaded. Then use the volume up/down button to select the menu to your actual recovery media option and press the Windows button to confirm. Then a menu appears, where you must follow the on-screen instructions.

  (* 2) * the 2nd option of restore partition recovery is also possible.
  Stop the tablet. Press and hold the power button / stop and the volume button up until the start menu is loaded. Then select HARD drive recovery. Now press Yes, select troubleshoot, select Reset your PC and follow the instructions on the screen to complete the process

  Alternatively, you can perform the restore through laptop settings in the operating system. (parameters-> change PC settings-> update & Recovery-> recovery)

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Remote Desktop does not see HP 8500

  My remote desktop does not see my new HP Officejet Pro 8500.  He's always seen my printers in the past, including my HP Officejet Pro 7600 on Windows 7.  I can't understand what setting I have to miss.

  Finally, I figured out, and I'll post it in case anyone else needs help.  MY remote desktop is accessible via the Terminal Server (Windows 2003 Server) services.  the driver must be loaded on the server is available with this link:

  OJP8500vA909_corporate_12_en.exe

  After you have installed the driver on the server, install the printer through "add a printer", local option and uncheck "auto detect."   Find the driver on the list, and then install the printer.  Then you should be able to see it on the server.

  If you then install it on a remote desktop (through the Terminal Server services), download the driver 8500 on remote desktop, install the driver on the desktop through "add a printer".   Right click on the printer on the "printers and faxes" screen and view properties.  Go to "ports" and find a port that communicates with your printer.

  IT seems that a special driver must be installed on the server, and then the standard printer driver must be installed on the remote desktop.

• Image Count Reset does not?

  It is strange to ask a question here I'm usually the one answering them ;-)

  But in any case, is there a problem with image monthly account reset does not to the 10 of every month? Added the subscription in June and he has yet to reset. Anyone else having this problem?

  Hi Brad

  Thanks for all your help on the forum of Stock!

  Let me see it for you.

  Kind regards

  Bev

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• I can't log in to my account to Mozilla, and Password Reset does not work.

  I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
  and password reset does not work. Here is one of my themes:
  https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
  my email: [email protected]

  Support for the site Add - ons are here:
  https://discourse.Mozilla-community.org/c/Add-ons

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.