Symbol "Do Not Enter" appearing on the gray splash screen

Similar Questions

• Satellite Pro L300-1FN does not start - hang at the BIOS splash screen

  My Satellite Pro L300-1FN refuses to start. When turned on the laptop displays the home screen toshiba/insyde H20 BIOS and the message "press F2 go to the Setup utility, F12 to go to the start menu" and flashes the light access to the hard drive, but don't try to continue loading. I left the bios at the start screen, but it doesn't do anything for long hours on a power supply or is running the battery flat while on battery.

  Is there a way to re - put the BIOS on this unit? If it's a desktop unit I would remove the CMOS battery to force a reset of the BIOS but that's impossible on a laptop. The hard drive is fine because I have it plugged into another system to remove valuable data.

  Hello

  What happens if you press F2 when starting the laptop to the top?
  You can access the BIOS?
  If so, access the BIOS and set its default value. I think you need to press F9 or F10 to get default parameters, but this will be mentioned at the bottom of the page of the BIOS.

  Check it!

• I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  I have an iMac 21.5 inch Mid 2010 OSX EL Capitan 10.11.6 Version and I get occasional yellow notes that appear on the display of the office telling my local name of the iMac 4 changed to local imac5 does that mean?

  Hi Clayton,.

  This means that some services has tried to open a connection & couldn't, possibly IPv4 vs IPv6 or iCloud/back to my Mac.

  Mifgt try the helpful message here...

  Name of my iMac computer continues to change automatically after Yosemite upgraded

• My site is not correctly appear in the Firefox browser. Can you help me?

  My site is not correctly appear in the Firefox browser. Can you help me?

  My Web site: http://hayro.la

  You can have zoomed pages by accident.
  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl / command + 0 (zero))

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why some programs in the folder program files do not have appear in the start menu

  Hello
  I've scanned my laptop (vista home premium) with antivirus, then I lost a few menu start programs
  but they are in the folder c:\program files and they run right.
  they do not have appear in the start menu
  How can I solve this problem

  Click Start - All Programs - Accessories - System Tools - run (or press the Windows key + R). Type the following command

  menu start shell: common

  Shell programs: common

  start of the shell: common

  Shell: Start menu

  Shell: programs

  start of the interpreter:

  Each folder open in a place in your folders on the start menu.

  Start menu

  -Programs

  -The boot

• alguien sabe porque en en pro Prime Minister the pestana of title, not me appears active the option of logo?

  alguien sabe porque en en pro Prime Minister the pestana of title, not me appears active the option of logo?

  You can ask your question in English.

  Can't make head or tail with the translation.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• FX6831-03 will not be able to start Windows. Just shows the gateway splash screen, then freezes

  My Gateway FX6831-03 will not be able to start Windows.  Just shows the gateway splash screen, then freezes.  OS is updated to current MS Win7-64 bit-w/all and virus/malware protection., Went over 4 days vacation, and when I tried to turn it on, it should display the gateway splash screen, then stop. can't hear anything that happens on the inside.

  Problem solved!  An external hard drive, powered by a separate power supply, was not turned on, but it was plugged into a USB port. When the computer "seen" this cross-town 'dead', he just stop - but no message appears problem.

  The good part?  Vaced out all the dust and replace the bios battery.  [I'm good for at least another 2 years;-]

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• T400 suddenly won't boot beyond the ThinkPad splash screen

  .. .only visible indicator of a problem is that the drive activity light on the bottom of the screen stops ignition etc when the ThinkPad splash screen appears. No bumps in the system, no unusual activity to suggest physical damage to computer laptop or disk - started very well in the morning on the desk, would not restart from the same location on the office after lunch. System also won't start on a bootable system disk (but you can hear the drive access). System is less than one year.

  I solved my problem: Lenovo Service Center for repair under warranty here a diagnosis nor a bad mother and a bad battery, due to abuse of the handling, etc. the computer could suffer (it seemed to be a factory default). No indication as to whether one or the other 'bad' component caused the other to fail. in total 48 hrs to repair, most of the waiting time for a new motherboard coming in the night. No charge to me for what it is. Life goes on.

• M9452p Pavilion lock, restart the HP splash screen and freezes

  My HP Pavillion M9452p primer, I can connect and I ran a program to copy a disc.  the system froze, then went through the process of restarting and froze on the splash screen for HP.  Rebooted the system by closing doen ran diagnotics and received a message "BIOS4 Boot error, contact the HP support" what dio I need to do to fix this?

  Tried system restore and system recovery using the F8 key start, but he did not, it ran very slow and then rebooted to start HP with the F10, Esc, F9 and F11 options and froze both times.

  I just replace the HD two months ago, and it works very well. I just removed all the component and repluged everythignback to gether, ran diagnotics and everything that happened, but still have the same problem with freezing and restarting the HP splash screen.

  Motherboard?

  Mounted with different lock forum, freezing, etc.

• Pavilion h8 - 1070t: blocked on the HP splash screen, computer beep

  I just installed a PSU Corsair CX600 and an EVGA GeForce gt 740.

  When I start my PC, is rest on the start screen and beeps once, every ten seconds. After 3 beeps (30 seconds) my PC beeps again followed three quick beeps and the monitor stops receiving signal from the computer (I do not see the HP splash screen, no signal).

  What could be the problem?

  I think that your problem is that the video card is not compatible with your BIOS.  EVGA 700 series cards require UEFI in the motherboard instead of a standard BIOS.  I suggest you to contact EVGA Tech Support (1-888-880-3842) to see if they have a VBIOS update that will allow the card to work with your computer.  If they do not have an update that they can email it to you.  Tell them that someone of the HP Forums suggested that you call.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• What is the symbol that looks like a horizontal Z and appears in the gray area behind the image in Lightroom CC? [was: Question]

  Anyone know what the symbol that looks like a horizontal Z and appear in the box grey behind the image in Lightroom CC please?

  It's the sync symbol.

• Can not enter text with the keyboard

  We can type in any other application on the computer, but not Firefox. If Firefox is active, keyboard shortcuts do not work. He does not type them into the awesome bar, and we tried 4 different sites with Forms. None of them register typing. We even tried the touch keyboard. It also works in any application, we're trying, but NOT with Firefox. However, the mouse controls work, which is how this information has been entered.

  We use Firefox for our SMEs. It is convenient to have all the saved passwords in a browser. But today, we have to find or reset each of them, although we use another browser until this issue can be cleared.

  Using a Dell laoptop running, updated to Win 8.1 and the latest version of Firefox available for update. Anything that can be updated, has been done.
  Any suggestions?
  .

  He allowed the restart of the computer. It seems to have been connected with recent updates.

• dsloginitemhelper appears in the gray box at the start

  Can someone tell me why a gray box appears at the start of my who has 'dsloginitemhelper' in the title of the box and then disappears?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.