synaptic device not found!
Hi guys
My lenovo z500 show this error when installing synaptic
and I have to go this path on the cd driver and install this file
but I think that pilot synaptic without installation completely
on my frind z500 laptop install so good. See:
but on my z500 laptop no install right-click synaptic pad and not any port of smb. :
other work soft momentum so good with fingers 2,3,4,5 but two tap click right does not work!
synaptic does not work!
also, I update driver for touchpad
OS: WIN8 64
pls help me.
THX
Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules
Tags: Lenovo Notebooks
Similar Questions
-
X 220: Ultranav driver moved - synaptic device not found!
Hello
I'm fighting to get the touchpad on my 220 x to work. The driver UltraNav for him does move, complaining that the 'not found Synaptics device!
I know that the touchpad is there, because I can see it.
Any help would be appreciated, and I did all the obvious things like updates, bios etc settings
Thank you
ODO
1 is UltraNav pointing device in the Device Manager with question marks or exclamation points?
2 are TouchPad/TrackPoint is enabled in the BIOS Setup menu?
3. check the tablecloth, the connector of the device to the system (under keyboard/palmrest) map -
Device not found Airport Extreme
We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.
The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.
I have reset the AirPort Extreme to the default settings, but the problem continued...
I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...
no idea how I can fix this problem?
You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.
If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.
Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.
There is a solution: on a Mac, open AirPort Utility and select file > configure other...
For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.
Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.
If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.
Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.
-
Hello! I have two devices from the airport: on the one hand at home and a time in my lab Capsule. I was away for 20 days and yesterday, when I came back, there was a problem with the two: my Mac cannot access these devices, they can connect to wifi networks hosted by them. When I try to access these devices via Airport utility, I get the error message "device not found". This message, both at home and in the laboratory, tells me that the device was part of my network before, and that I should check if it is within its range. There is an option to 'forget the device' in the end. It is quite strange, as other Mac networking for my laboratory do their backups normally during my absence. Could you please help me? Thank you.
This was reported once many here recently.
A 'solution' refers to those who have set up their base stations for Back to My Mac. If you did, how to follow recommended action is temporarily remove or disable this option, as follows:
- Run the AirPort Utility.
- Select the base and then station, select change.
- Note: You may need to use the option "configure others...". "to access the base station. Enter the IP address of the base station, the default value is: 10.0.1.1 and base station administrator password when you are prompted.
- On the tab of the Base Station, go back to the section of my Mac at the bottom of the window.
- If you have entries here, select it and click then the minus sign "-" button to remove it.
- Click on update and allow the base station restart.
-
Why do I see "device not found" airport Admin?
I have an AirPort extreme and my parents have a TimeCapsule. They are both showing the message "device not found" in the administration of the airport. We tried cycling power etc. Our networks still work, however we can not connect to manage and backups of my parents stopped. Is anyone else seeing this?
You have Back to My Mac configured on your AirPort Extreme? If so, disable it.
This issue was widespread in the last days. We are all waiting for an answer / difficulty of Apple.
-
Device not found, but internet work
I have an Airport extreme with a capsule 2 TB that I use as a backup file.
All of a sudden I can't connect to the airport time capsule. When I launch the airport utility, there is an orange triangle/exclamation point that fits the description "device not found". The router works well, since I am connected to internet (at this time).
I tried to unplug the unit and time capsule comes back for about 2-3 minutes until the same problem occurs again. Factory of Soft and hard resets produce the same results. I know this isn't my macbook pro because it does the same thing on my phone as well.
You have Back to My Mac configured on the TC with your AppleID?
This has happened to me and when I removed my AppleID and disabled Back to My Mac it ceased to occur and the TC became visible again.
I hope that Apple will fix this soon but it would pay record a call of support with Apple on this topic as well.
-
Airport Time Capsule device not found
I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014). It integrates the latest version of the 7.7.7. Just last week, I received the error device not found (.. .has been previously a part of your network... etc.). The internet connection is always good and the component of the time capsule router still works. When I unplug the device, it can find him but eventually will go down in a few minutes. I also did a warm reboot, but some results. Printer connected to the time capsule does not, nor does Time Machine back ups.
Would be grateful of any advice on why the drive not found error continues to occur. Thank you!
You have Back to My Mac enabled on the Time Capsule?
If so, turn it off for the moment in the AirPort Utility and restart the time Capsule.
-
Device not found in airport 6.3.6 utility
Running a 5th generation I'm stuck. I checked a bunch of other posts and restarted all devices, as well as reset the base station. I also adjusted IPv6 at the local level.
When I pull up the Airport utility, I get "device not found" and cannot connect to the base station to adjust settings. What is weird is I can get temporarily in Airport utility if restart my MacBook and the base station at the same time. However, it does not last long. I also see the drive mounted in the Finder all the time. A Wi - fi connection works without interruption.
I tried this on 2 Macbooks, an ipad and an iphone. El Capitan running. I am at a loss.
Someone at - he was able to solve this problem.
You are one of the many ad today with this problem.
for example. There is only one thread.
Time capsule not recognized in the utility of the AP
I suggest that you can still access the AE or TC using configure others and type the IP address.
A 5th generation is the flat and quite old but more reliable than Gen6. But beyond 5 years they get flakey.
If you mean a 5th Gen TC then this is the newest one.
I am surprised, he's also missing on the iOS but who was more reliable version of airport utility.
-
Performance of Time Capsule and "device not found".
I am now on my 2nd TC average weeks because I thought the first was broken-, but I get the same questions on the second >
- A Wi - fi connection is very intermittent. Seat 3 feet of the TC, I can get 450Mbps on my iPhone 6 and 5 minutes later her stockings to 2Mbps or less (measured on the Wi - Fi Sweetspot app). Similarly, the speed of connection internet test ranging from 20-30Mbps until 0.3Mbps not it depending on the strength of the wifi.
- Air utility sometimes connection works and see the TC. But often it is not. First he asks the password, maybe 2 or 3 times. Can I get a yellow triangle showing on utility AP with "Device not found" and the only option is to Forget. The TC IS still there, but since I use it for ethernet and wifi internet access still works because I am always online.
So, what speeds SHOULD I get the Wi - Fi, 3 feet of the TC - I would have thought higher?
Why WiFi speed decreases considerably, sometimes in the same place?
Why the Airport utility is not the device, when it is still there?
Is this a general problem with TCs? Is this another duff, one back?
Thank you
Update you the firmware to 7.7.7 in the TC?
If all tests performed 7.7.7 then downgrade the firmware to 7.7.3 as he could work much better.
If it still fails I just return it.
They seem to vary a lot in quality of construction. Some work OK but many have problems... and when you Exchange to the same store you get another from the same lot.
There are a lot of articles on wireless diagnosis.
for example, from your Mac.
Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support
Follow the wireless in a few days... and use ethernet if possible... Wireless is never a reliable substitute for ethernet.
iOS
If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
A lot of wireless issues with each new version of iOS... he could so your phone that is the problem, not only the TC.
https://www.YouTube.com/watch?v=j4qgH8uyOk0
You should check how wireless is around you and the intensity of the signal of all devices.
I also need to know the exact of the TC configuration and your network if you want to find the problem. Although problems with the Wi - Fi in the TC would be not at all unusual.
-
Portege R600: SIM inserted but error: "device not found".
Hello
Portege R600 under XP.
Put a SIM card in the slot, but I get the error above: Wireless Manager Toshiba "device not found".Cannot find the configuration options or anything like that in the manual.
Can someone point me in the direction of literature?Thank you very much!
Evan
Hello
Here you can download the latest version of 3G driver and tool:
http://APS2.toshiba-tro.de/WLAN/?page=3gdownloadsHere you will find a knowledge base on the topic of G 3:
http://APS2.toshiba-tro.de/WLAN/?page=3ghowtoand here you can find a HowTo create + how to create a Dial-Up connection with 3 +.
http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htmHope this helps
-
Device not found Boot Install an operating system press F10 to reset factory and she request password have my pw does not give me the code 69599233
Hello
Thanks for posting in the HP Support forum. Welcome Onbord!
Regarding the admin code you have give, please keep the power button hold for a while until that the PC stops. Repeat using the power button and
as soon as you do, keep hitting the key Esc (as tap-tap-tap) - you will enter boot HP like this menu:
Press F10 to enter the BIOS and when it asks for password, please enter this code 76491815 to ENTER.
Follow the on-screen instructions to change the password or delete.
-
Office jet 4500 G510-g, the imaging device not found
I have an Officejet 4500 with a wired Ethernet connection. For some reason any, that my computer has ceased to be able to scan from it, I can still print and everything very well. I don't remember to make changes to the system and other computers on the network can always analyze without any problem. I restarted my computer, unplug the printer, uninstalled and reinstalled the software, active windows firewall settings and cannot find any reason why it won't work. I am running Windows 7 64-bit on the computer that does not work, the other computers on my network that still work are running windows 7 64 bit and XP. On the "HP Imaging device not found" error message that opens under more information, I get this: 8 [(1, 0,-2147221496)]
I've lived the HPSDU and he said: there is a problem with the driver and he cannot communicate with the product. He said also it is impossible to scan with windows WIA, and finally it's the Twain component may be damaged. I have uninstalled, reinstalled, re-downloaded the Installer off the HP site several times, but can not solve this problem. Help, please.
Hi crakerb,
When you click on the plus sign on the error message is that all of the information it provides?
Because you can not install the printer using the USB connection, it seems to have some problems with the operating system on this computer. Did you back up your data and perform a full system recovery?
-
3480CT, device not found driver Portege
I have a problem,
I have a laptop toshiba portege 3480CT and is not an operating system. I am trying to install win98 SE, but when it starts to install this message appears:
device not found driver: "OEMCD001."
Invalid device CDROM drivers selected: so, how can I get these drivers, the computer has only CD-ROM drive, FLOPPY No.. CDrom drive is a pcmcia drive.
Please help me!
:)
I also tried to install XP pro but with bad results, it gives errors when it tries to start the windows installation...WHAT to do, any help much appreciated!
Thank youHello
If you have installed WIN 98SE on the device you need Toshiba drivers and utilities.
Win 98SE OS you install all the applications in the following order:Display drivers for Windows 95 (for S3M7 Savage MX/IX) V4.11.01.7006 - 7.02.88 - 01
YAMAHA AC - XG Audio Driver for Windows 95/98SE V.4.07.1011
Floppy disk Win98 companion W98C09
Logitech MouseWare for Windows 95/98 V8.37 BLD246
V5.77 - MR577ALL004 modem driver
Driver for TEAC V.1.06t (FDD Version 1.08 t) USB floppy drive
Driver drive disk USB for YE - DATA V.4.30 Beta
Panning of Driver Support (panning.sys) V3.0 (included in the display driver)
Multi Media Port Replicator IDE Driver V.1.1.2.0315 with the file catalog
Driver NDIS for V.2.21 de MSIR3.0 (driver Win98 OBOE)
Toshiba Fast Ether LAN adapter (Intel 82559) V.2.01
HALLOC. EXE (included in the Toshiba utility) V2.0
Toshiba W983480US utility
PCMCIA. INF for Windows98SE (support ToPIC100) V1.0
QFE Win98Gold/Win98SE QFE KB:Q239697
QFE Shutdown QFE Q242934
QFE DiskTsd.VXD V.4.10.2223 Q246387xx8
NDIS QFE Q243199 QFE
QFE Win98SE USB QFE Q241084
Direct X 7.0
Acrobat Reader
The users manual PDF file
File PDF Manuel Modem internal
Multi Media Port Replicator manual PDF file
Toshiba wallpaper
MS URL security updateFor Windows 2000 / XP in this order:
Display driver
TVALD
TOSHIBA Power 2 extensions
Toshiba Utilities
Toshiba Mobile Extensions
Energy saving of Toshiba Display Driver
Toshiba infrared driver
Toshiba IDE driver
Acrobat Reader 4.05
Operating instructions online
Online modem manual
Online manual users to multimedia Port Replicator
Audio driver
Driver Modem
Country select utility (included with driver modem)
Copy Toshiba wallpaper in c:\winnt
Apply Service Pack 1 for the system
Activate "Show the components of the" unplug or eject hardware trayicon
Reinstall the display driver to support the new graphik S3 chipAll the drivers you can find on the Toshiba site:
http://EU.computers.Toshiba-Europe.com/
Please let me know if it has been successfullyBest regards
-
Pro 608: HP 608 Pro will not boot-Boot device not found
I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!
Keep saying that Boot Device not found!
Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?
I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!
Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not. I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios. I set the Bios to activate the firmware-C update.
Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.
Most likely, they will replace the unit.
-
Hey guys,.
I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:boot device not found please install an operating system on drive hard drive (3f0)
The hard drive is new and I did not not how its gives me this error!
In addition, this laptop does not seem to boot from a cd to format!
Any ideas?
Thank you
KarlHey BHK6,
I found out what was wrong! It was so simple!
I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.
Thanks for your help anyway
Karl
Maybe you are looking for
-
6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package. A program required for this teaching to complete could not be run. Contact your supplier of staf
-
Satellite C660 - no card wireless network in Device Manager
I had a Satellite C660 for months with a preinstalled operating system.I've never had a problem with my wireless until recent days. I checked Device Manager and it seems that the wireless card is missing,I tried reinstalling the drivers but it stops
-
I am Setup extended to the acquisition of multiple discs, number of records, set to 50 for 8 channels of 50000 samples. I want to know after 50 triggers received by scope will be stop acquisition or it will start to crush the Chronogram of 0. I ask t
-
Lenovo Thinkpad w520 Virtualization Technology
Just bought a new w520 and surprisingly I can't find the option of virtualization technology in CPU BIOS options. Does w520 supports VT at all? Is there another way to enable it? (impossible to find info on Google).
-
Hello I recently installed windows 7 on the windows 8 that came with my Hp Envy dv7-7238nr. Now that I have everything set up and installed the drivers, I would try to run a sub of linux and have duel booting with windows 7, I installed. I have 4 le