Synaptics touchpad on G60-530US think I touch when I'm not.

Similar Questions

• How can I disable tapping on Satellite A210-103 with a Synaptics touchpad

  Hello

  How can I disable tapping an A210-103 with a Synaptics touchpad.
  Tapping means to me, that when I touch the touchpad of the notebook translate under circumstances like a mouse click, on which I don't want.

  In the settings of the Germans, I found nothing of such "tapping."

  Jürgen

  Hello, Hans Juergen

  Of course, you can turn off the tapping.

  I assume that you want to disable this tapping and instead of tapping you want to use the two buttons on the touchpad. Am I wrong?

  This can be disabled
  Control Panel-> mouse-> last tab settings of the device (or similar).
  There you have to choose the Synaptics TouchPad settings

  The new window should open, and you could find a lot of different details and parameters.
  You must mark the second option tapping. It s from the point of view of all.
  Here you uncheck the option enable tapping

  That s all ;)

• need to replace hard drive for HP G60-530US

  where can I get a replacement of my HP G60-530US laptop hard drive.  It is not guaranteed in a few months. Where can I go to and I have search. There is determination on the original looking HD numbers.

  Thanks in advance for any help

  Hello

  I see no reason why a hard drive 7200 RPM would not work.

  I put SSDS in both my latops and have no issues.  An SSD was in need of a firmware update but otherwise no problem.

  You can check the size of the hard disk to ensure than a standard notebook drive 2.5 "can hold in the hard drive caddy.

• Equium P300-16 t with Synaptics touchpad. Stuck left button?

  Hi all

  I have an Equium P300-16 t with a Synaptics touchpad.
  A few months back I had the following problem. As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point. I've updated the drivers, tried a system restore, checked under the button of touchpad for obstruction etc and nothing has changed.
  I made a completely new reinstall of Windows... still the same problem. Suspected a defective touchpad, so I contacted Topaz for a replacement touchpad mounted that and still the same problem.

  so... after having eliminated defective drivers/software/hardware, I'm out of ideas. Is there anything else I can check?

  Works very well with a USB mouse.

  Thank you

  James

  > As soon as I touch the touchpad or the left/right button, the icon will appear to show the button on the left as being depressed; It would be nice up to this point

  I think you should check the settings.
  In Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  Here, you should be able to get all the parameters of the touchpad.
  In my case, I found interesting feature in the speed of the pointer and typing parameters.

  There is a charming area of tape, and if you enable registration you could get access to other environments of tapping.
  The option is called DragLock in my case that his automatic release and auto release delay value is set on the court.
  Recommend you check this!

• HP ENVY M6-1105dx: Synaptics Touchpad freezes briefly after typing

  The touchpad of my HP Envy M6 1105dx hangs for several seconds after you type on the keyboard, each time. This problem started after I upgraded to windows 10. My drivers are up to date. I tried to uninstall and reinstall the drivers, but that has not worked. I would rather not reinstall windows if I didn't, so I decided to come here. All advice is appreciated.

  Hey, I had the same problem and it's really frustrating.

  Here's what I did to solve the problem, I hope it helps.

  Open 'Control Panel' by clicking on search and enter the control panel.

  Then, open "Synaptics Touchpad", it will have a version number after it I think. Mine did.

  Then click Advanced in the upper tabs.

  Then you should see that a "filter activation time" set it to zero seconds.

  

  Test now by typing and then move the mouse and see if that fixes the problem... it's me.

• Toshiba Satellite A200 Synaptics Touch pad, scrolling does not work.

  Questions of Toshiba Satellite A200 SKU PSAF6A - 02Q01N Synaptics Touch pad, scrolling does not work.

  Operation system Win7 x 64, re-formatted and updated since Vista x 32, after having teething problems, install the drivers and do everything to work smoothly (for at least 2 months now), I managed. Today out of the blue the scrolling on the touchpad stopped working.

  I read on some forums that do, most said try using CCleaner to uninstall the driver and reinstalling.
  Tried to uninstall and reinstall the driver support Aus > drivers, done this, but received the error, (something) do not recognize the operating system.

  I went to the Synaptics site found a driver that has been recognized, it has installed but not really want to reboot the pc before I get some advice first. As there is a warning about the specific drivers for specific models and manufacturers...

  Help required, please.

  Hello

  Uninstall the existing touchpad driver and install it:

  http://Support1.toshiba-tro.de/Tedd-files2/0/tpdrv-en-20090320132707.zip

  Recently, it has been already discussed on the dysfunction of the touchpad in this thread. But unfortunately it did not help him
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52689&TSTART=30

• Satellite L955 - 10K - Synaptics Touchpad Driver is not working properly

  Hello, ASRR here.

  I had a problem with my driver for the Synaptics touchpad yesterday. I'm very used to use the "gestures" to work with my touchpad and the gestures did not work properly (in fact at all) for a while. Scrolling with two fingers, three fingers touch and others (in fact all the gestures) no longer work.

  The cursor moves, and works fine but not gestures.

  When I go to mouse option in the Control Panel, a window appears indicating that the PC is "Unable to connect to the Synaptics Pointing Device Driver." and asks me if I want to uninstall.

  I have tried to uninstall, and then go on to Toshiba support page and download a driver that has been adapted for my model, operating system, etc..

  When I implemented the driver I downloaded and restart the PC, the same window appears when I try to go in mouse options in Control Panel and gestures don't work.

  An interesting thing I noticed though, is the fact that when I back the driver (in the settings to properties then Hardware) gestures do FINE. However, as he always asks you to restart the computer for Rolling back the driver will take place, when I restart it, it defines the Microsoft 2006 touchpad driver. who does not understand the gestures that I need.

  I tried several times to fix it, but I can't. I went the UEFI firmware set up and tried to restore default but without success.

  I really don't know what to do. Could someone please help?

  My Toshiba model is a Satellite L-955-10 K with a 64-bit processor and system of operating Windows 8 initially installed.

  Any help would be greatly appreciated. Thank you

  > I went the UEFI firmware set up and tried to restore default but without success.
  How to understand this? Have you tried to put your laptop to factory settings?
  To be honest I don't understand what the problem is here. I also thought that the new driver installation can help but obviously it didn't help much.

  I don't know if this is an option for you, but you can set laptop to factory again and I hope that everything will work properly again. Before doing this test also to roll back OS to an earlier time using System Restore option.

  One last thing: it has nothing to do with your touchpad problem, but I recommend you create a recovery (recovery backup image) using pre-installed recovery media creator media.

• touchpad does not work until running Synaptics touchpad

  Hello

  I bought the Hp pavilion dv6 - 6 c 55 and I have problem with my touchpad. Its functions (scroll, zoom, two finger scrolling,...) fact does not not after cranking up that I run Synaptics touchpad version 7.5. I am using windows 7 Home premium 64-bit, which was on my laptop when I bought it. I checket from msconfig.exe items and my touchpad driver has been chosen, how can I solve this problem? I appreciate if there is no solution and help me.

  Hi Last_man,

  Thank you for visiting the Forums HP's Support and welcome. I read that your wire on your HP Pavilion dv6 - 6 c 55 Entertainment Notebook and questions with the here is a link to the download version more returned for Windows 7 because I think you are using the version for Windows Vista. You may need to uninstall the version you have now and restart the computer, it should automatically update the new version in for you.

  I hope this helps.

  Thank you.

• DV7-3135: Synaptics Touchpad two fingers scrolling, scroll one finger and double tap does not work

  Clean the OS installed, Synaptics driver installed via Windows Update.

  V19.0.12.95 Synaptics pointing device

  also will not save settings after restart.

  UPD: I discovered that my touchpad doesn't support 2 + finger touch.

  I installed an old driver synaptics. now a finger scrolling works very well. but you know... No tap/rightclick 2 fingers... I didn't know this touchpad so badly.

  What happens if you use old driver for Win 7? Not sure what exact model you have: http://support.hp.com/ee-en/drivers/selfservice/identify?q=dv7-3135&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Of course, you must also disable automatic driver update.

• Synaptics Touchpad and Pointing Device Driver missing on Satellite A200?

  Hey,.

  I received a notification of upgrade on the touchpad synaptics installed on my laptop A200 - 1 m 4 and after I installed that the touchpad respond well, so I rolled back the driver, but he wouldn't use the scroll option. I reinstalled the driver again, but still I couldn't use the scroll function.

  On the icon in the taskbar, when I want to see the chart pressue accessory it gives me this msg * sorry, this program requires a Synaptics TouchPad, and the Synaptics pointing Device Driver * I miss him the 2nd can't so anyone made me know where I can find the installer for it.

  Thank you very much in advance,
  LEEN

  Hello

  Satellite A200 - 1 M 4 belongs to the series of PSAE0E and you choose this serial number for a driver download.

  On the European driver Toshiba page you will find the * Alps Electric Touch Pad driver *. (This driver allows you to set the properties and functions of mouse control) and
  the * Synaptics Touchpad driver * (this driver allows you to set the properties and the touch pad control functions).

  Both must be installed!

  If that doesn't help then try to roll back the BONE to this early time (until you've updated the driver for the first time)

  Good bye

• Disable Synaptics Touchpad tap to click through registry?

  I have a laptop HP-G60-553NR 3 year and enjoyed with a Synaptics Touchpad (OS is Windows 7 64-bit).  I use the latest & greatest, driver recommended by HP:

  2009-08-28, version: 13.2.2.0 has

  This driver no longer works well at all (erratic click functions, unstable, moves through the screen on its own, etc.), but there were no other updates from HP and uninstalls / reinstalls multiple set.  After a ton of frustration, my only solution is to download & install the latest Synaptics driver:

  2013-02-25, version: 16.3.15.1 (Windows 8/7/XP/Vista 32/64-bit Edition)

  In principle, it worked well and the stability is back, but with a problem; I lost any opportunity to change the Touchpad settings - and with this driver, Tap-to-Click is ENABLED by default and I want to turn it OFF.  I lost the "Device settings" tab in the control panel there are long (not), but there was also a mini-outil of support which could be installed/activated in the system tray where I could switch tap to click power.  This option is no longer possible because if I install it, it reverts back to 13.2.2.0 driver.

  My dilemma: 1) I can't go back to the old driver because it's a disaster.  (2) I need to stay with the new driver, but I hope to find a way to disable tap-to-click.

  I see only three solutions: 1) maybe the gurus of HP or some of you who monitor these forums are aware of a more recent version, stable driver that works with my particular model or 2) someone can instruct me the keys in the registry, turn the tap to click on/off so I can turn it off myself (, or 3) use external mouse all the time (which is hard to do when the mobile).

  Synaptics doesn't give any support and simply tells the user to 'contact your manufacturer', so here I am.  Any guidance would be appreciated.  In addition to this problem, my laptop is rock solid.

  Thank you!

  SOLVED!

  I continued to try to solve this problem after the validation and finally found at the level of the program folder Files\Synaptics\SynTP.  I noticed there are several requests here, so I started to run them one by one.

  SynTPEnh.exe is the latest version of the mini tool, "Synaptics Touchpad Enhancements" that I had used.  It offers the possibility to load only once, or allow to load at startup in the system tray.  Left click + functions simply open the Control Panel, but right click + displays the appropriate menu where I can uncheck the tap to click.

  I hope this information is useful to others, because there are like mine all the ' web on several different platforms.

• Touchpad frozen doubleklick (HP 350 G1 Synaptics TouchPad)

  I recently bought a G1 of 350 HP with Windows 7 64.It comes with synaptics TouchPad driver 17.0.16.02.

  Shortly after duobleklick was no longer accessible. I had to use the left button of the extra touch to start an action. No problems reported by Device Manager.

  You use the windows driver works - but without the specialties of the pad.

  Any help appreciated.

  After many tests with the HP drivers I finally installed the driver synaptics on their Web site. It seems that it works.

  Edit:

  It works very well

• Synaptics touchpad 64-bit improvements has stopped working.

  Hi guys,.

  I recently bought new HP 15-r022tx Notebook PC (product number: J6M27PA) which comes with free back, installed windows 7 x 64 and set to update all drivers HP online, after all the last update I get an error message at startup "synaptics touchpad 64-bit improvements has stopped working".

  

  have tried to configure the settings of the mouse but wen I try to access the setting of the mouse, I get an error message "unable to connect to the synaptics pointing device driver.

  

  have uninstalled and re installed driver from hp support still the same problem.

  so after some research online and no luck in one of them, I continued using tour by closing the program on the first error message every time you start no function touchpad synaptics as two key scrolling, zoom etc... but sometimes the cursor jumps erratically all about and moves on its own with no contacts in the touchpad, click options do not work wen cursor strats to move each time you start himself, after an observation that I noticed that the mouse works well on (by closing the program some special functions on the error without touchpads) until I right click it (sometimes after the first click a few times After several clicks) until I right click on using the keyboard, the mouse seems to be working well but after I right click of the mouse, he goes to his way.

  any suggestions guys

  Thanks guys...

  Finally, I found a fix for the touchpad driver. Looking at the page of the recommended laptop touchpad driver laptop 15-r022tx, I noticed that in the tab system requirements, only Windows 8 is mentioned. It seems that this driver only works for Windows 8. In Google search again for the Synaptics touchpad driver, I found this link to the HP Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=ob-116587-1

  This driver is supported for all variants of Windows 7 - x 32 and x 64 (as told by the website).

  The driver in this link works perfectly well for computer laptop 15-r022tx. Downloaded and installed the driver. He followed with a reboot. The multi touch features and scrollbars now work correctly in my Windows 7 x 64 operating system.

  PS: If this solution helped you, please give a shout out to this post.

• Notebook Synaptics TouchPad on HP 625 computer wheel

  HP 625 notebook computer & Windows 7 Home Premium bits.  Can I disable only the touch-type 'wheel' on the Synaptics TouchPad V7.4, leaving the rest of the Working Group TouchPad?  It can be a nuisance!

  I tried this on mine and it seems to work, go to control panel > mouse > device settings > settings > expand scrolling in the left column.

  Take the black square point stressed by the yellow arrow and reduce the size of the scroll area until it no longer exists.

  

  I also found a box of "Uncheck" 'enable vertical scrolling '. Uncheck this box simply deactivate it. If you click on "Scroll of a finger" in the screenshot may be disabled it. See purple arrow in the screenshot below.

  

• HP 2000: Synaptics Touchpad driver trouble (installed but does not appear in Device Manager)

  I had a problem with my touchpad for months. The synaptics touchpad driver is installed but the touchpad does not work and does not appear in either (just my external mouse) Device Manager. . I tried various troubleshooting methods, but none worked. Any help would be a lot for me. Thanks (in advance).

  PROGRAMS AND FEATURES

  

  DEVICE MANAGER

  

  Hi @decyferme,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  How can I find my model number or product number?

  I understand that you had a problem with the touchpad for months because it is not responding. Although the driver is listed in programs and features in the Device Manager is not listed.

  Have you checked for virus and malware?

  Have you done all Windows updates?

  Have you tried to run the troubleshooter in Windows?

  Did you run HP Support Assistant to facilitate updates of HP?

  First you would try this step.  Some models, you can enable or disable the touchpad by double clicking on the top left corner of the touch pad.  Please see if it is applicable for you.

  Then in Device Manager, view hidden devices and search the hardware changes see if the touchpad now will be seen.

  Here is a link to the HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8) that should help you too.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If this gave a solution for you, please choose the solution provided to help others to find.

  Good luck!