Windows upgrade errors

Similar Questions

• Envy 17-k270: upgrade of Windows 10 - error c1900101-30018

  Hello

  I tried upgrading my laptop for Windows 10 several times and I get the following error message: c1900101-30018 and FIRST_BOOT SYSPREP. I tried to update through windows update and through the USB with no success so far. My last option will be to do a clean install of windows 10. I wonder if I will come through the same mistake by doing this.

  Has anyone done a windows upgrade installation clean 10? Has anyone found a solution or workaround above?

  Any help is very appreciated!

  Thank you

  I'm from Mexico, I had the same error code.

  Solved it by uninstalling tune up utilities and antivirus, update now Windows 10 without problem, using the official application "media creation tool" from microsoft to install via USB, now Windows 10 is running and active

  http://www.Microsoft.com/en-us/software-download/Windows10

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• I click on upgrade, it starts to install then after about 2 seconds. it come I can't install windows 10 error 80070003.

  Hi I'm moving to windows 10, once I click on upgrade, it starts to install then after about 2 seconds. it come can not install windows 10 error 80070003, someone has any ideas?

  ABATTS

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

  Try the upgrade again. If it does not work.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Upgrade to Windows 10 Error 80070002

  When you upgrade, it stops with code 80070002, any ideas? Windows 7

  Assuming that the Win7 computer is already fully-patched and you attempt to update through Windows Update, start here: http://windows.microsoft.com/en-us/windows/windows-update-error-80070002

• Windows update: error code preventing me from to update and upgrade to Windows 10.

  Original title: error codes

  error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

  Hmm, take a look on...

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  Having problems connecting?

• Cannot activate Windows 8 error "the Software Licensing service determind that specified only usable product key for the upgrade not to own pieces."

  Original title: invalid product key :(

  Today, I tried to load my computer and was faced with the blue screen error short story that my hard drive some how became corrupt and had no partition. Fortunately, I had a friend who told me step by step how to solve this problem using my hard drive in my brothers pc. When it came to reinstalling windows I booted the computer directly from my windows disc 8 and when I tried to activate the key once I was ready to I received an error Code: 0xC004F061Description: The Software Licensing service determind that specified only usable product key for the upgrade not for own pieces. Means that I can not use the key I bought and must buy a new one? It seems really unfair because I've already spent money on the upgrade.

  You upgraded to Windows 8, but did not have an earlier version of Windows Installer (error 0xC004F061)

  If you see error 0xC004F061 when you try to activate Windows 8, this means that you are using a product key for an upgrade of Windows 8 version and a previous version of Windows wasn't on your PC when Windows 8 was installed. To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.

  If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.

• BSOD after windows upgrade from Home Premium to Vista Ultimate

  Hello

  I have a brand new A200 - TH1 comes with Vista Home Premium installed Edition. I had to install Vista Ultimate to get the job in Sql Server 2005 Reporting SERVICES. Upgrade Windows at all times managed without problems or errors. The problem is that my system gets now BSOD about 20 times a day. Its extremely unstable. I have restored to Home Premium using recovery disks, everything is stable until I apply vista ultimate improvement. I tried the upgrade without having to install any other software, shortly after my system crashes with BSOD 0 x 00008086. Any help would be greatly appreciated. Vista Business Edition would be the surface, but there is no upgrade for this. I am very confused as to why a skeleton of the system from vista home premium to vista ultimate would cause my sysytem so unstable... IF I run the windows upgrade advisor it says the following: (I installed the lastest 4965AGN driver and Bluetooth supplied with the system is the last available (5.0.1023.0)

  ACPI Bluetooth
  After you install Windows Vista, this device will require an updated driver. For the latest driver, go to the Web site of the manufacturer of the device or contact you the retailer.

  Numtxpackets® Wireless WiFi Link 4965AGN
  Before you install Windows Vista, go to the device manufacturer's Web site to download the latest driver for this device. After you install Windows Vista, install the registered driver.

  Any help would be greatly appreciated...

  Hello Jack

  I imagine that you have these problems, because a few months ago, I read an interesting article on this update and it was written on possible problems after the upgrade procedure. I installed a few times Ultimate on my A200 but as new installation.

  What you can try is to install the OS by using recovery media, delete all the stuff designed by Toshiba, including all other software like Norton. After doing this upgrade brand.

  When the upgrade is complete, install all the stuff of Toshiba order following facilities described in the instructions for Installations. I A200 with Vista Home Premium but I don't have a media Anytime upgrade and cannot test with my Satellite.

• Windows 7 - error Code: 80246008

  Iaskedfor my update of Windows 7, the error 80246008
  Not make backup
  When you upgrade to internet Internet Exphore 8 9 vidieo Exphore watching the screen does not display the image

  Windows Update error 80246008 http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80246008>

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/2a9dd4c4-683f-45de-96D7-2411c5645ca1 >

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Vista update 87002efe and windows defender error 0x800106ba

  Very frustrated by these errors.  I have tried many of the fixes recommended online without success.  These errors are related?  They will disappear if I upgrade to Windows 7?

  Thank you.

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Windows Defender:

  Please note that some antivirus/security programs will disable Windows Defender is why it can be useful to check with the manufacturer of your antivirus/security program.

  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849

  TaurArian [MVP] 2005-2011 - Update Services

• Vista Windows update error after update sp2

  I've upgraded to SP2 for windows vista in May 09... Since then, all windows updates fail with an error code 80072efd.
  Firewall is NOT the issue here... Help, please!

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Windows Update error 80072efd
  http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update error 80070246

  Hello

  I have recently upgraded to Windows Vista Home Premium (SP1, 32-bit). Once installation is complete, I did the normal thing to go to windows update to get all the updates. After validation, it started to download somewhere in the order of 1 million updates (which is normal) and installed most of them without problem. However, these few finals refuse to install.

  .NET framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update - KB 951847
  For updates: KB850974, KB952004 KB953733 KB956802, KB957097, KB960803
  Update for Windows Vista: KB959108 KB952709, KB957388.

  Trying to install, I get the:

  Code: 80070246 Windows Update encountered an unknown error.

  Things, I tried that did not work and why/how they do not have to work:

  1: Download updates manually and install them with the Setup program to update windows on the local system (from windows update program) I just get the result "missed" without any explanation.
  2: started 'clean' and tried both (1) and the windows update with the same problem
  3: installation of each of them individually (both in the release order and random order) as well as a couple at a time groups, similar (updates security, updates, vista, etc)... nothing.
  4: I went to the site of support here: http://support.microsoft.com/kb/942968 and followed the instructions verbatim, including the download and installation of Windows AIK... no change.
  5: I tried "sfc/scannow" in an elevated command prompt (I also tried to take 'ownership' of my windows directory). I got the following results:

  Start of the phase of verification of the scanning system.
  Full check of 11%.
  Windows resource protection could not perform the requested operation.

  6. I run Trend Micro Internet Security for which I completely from the program (not to mention the 'clean' boot) and tried without success.

  The only thing I can think to do then (apart from reformatting..) is the option 'fix' on boot from the installation CD but I only am not 100% sure who would fix.

  Someone at - it suggestions? I'm puzzled.

  Thank you

  W1ReD

  Hi W1ReD,

  Thanks for posting answers.microsoft.com

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Follow the steps in this KB article

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update error code

  I realize that it is not specifically the error received, however, the determination is essentially the same.

  Publish on us and let us know if this does not help or if assistance is needed.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DEP closing Windows Explorer in windows XP error

  My computer is running Windows XP Home Edition with Service Pack 2. I get "Windows Explorer has been closed in error DEP". System seems usually hangs at this point and after some time, comes back with a "recovered from a serious error message" how to solve this? Is it "compatible DEP" copy of the Windows Explorer pane? It occurs once after I have start the system. After it passes by him once, it seems to do very well.

  First of all, it would be good to know why you didn't have not upgraded your system to Service Pack 3, which is more than 3.5 years.  SP3 contains many updates and security patches applied, can relieve your system of this affection.

  Check out the fixes in SP3 here:

  http://support.Microsoft.com/kb/946480

  Is not not wanting to work on Service Packs with obsolete systems (given that the question may have already been fixed with the SP3 update), I'll give you some general information on troubleshooting the errors of the DEP in Windows Explorer.

  First try to reduce the risk of a malware infection by doing this:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and only then to solve the remaining problems.

  If you have DEP errors, it will be useful to see if you can reproduce the error on request.

  DEP in Windows Explorer errors appear generally when click with the right button on folders or files and try to perform an action in the list right click for options.  If you can reproduce at will, then when you perform an adjustment, if you no longer see the error DEP, you will know that you have thought about it.

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• Pavilion dv6t-2000: Post recover process reimage disk - windows update error code a 8024, 000

  Hello

  After replacing my old HDD with a new SSD, I successfully used my purchased 1 & 2 recovery discs to reload Windows 7 x 64.  Now, I am able to connect to the internet and navigate through Internet Explorer, but I can't get Windows Update to work.  I get this error: Windows Update 8024A 000 error Code.

  I researched and found this fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-error-code-8024a00...

  However, after you follow the steps to stop services, rename the specified files, register the dll, and then finally to leave the services, I'm still having the problem.  I also ran a utility "fix" looking for issues with the Windows Update utility, it has been correctly executed and said it solved the problem, but the problem persists.  I get more a 8024, 000 of the error, but the update still does not work.

  I don't him have not yet tried this, because of the weather, but will plan no later than today:

  In safe mode, access c:\windows\ and rename C:\Windows\SoftwareDistribution to SoftwareDistribution.old.
  OK and restart.

  I also tried to upgrade to the latest version of the Windows Update utility which has as well.  I can install other applications (e.g., Norton anti-virus, java, adobe flash player) without problem.

  I noticed that I have not installed ServicePack 1, I did before as I have reimagee my computer. I need to install this first?

  Anyone has any ideas, or did I miss something?

  Your help is appreciated!

  Thanks, Orrin

  I was able to find a solution to this problem.  It is a problem with the HP recovery disk image.  It does not correctly install the Intel Rapid Storage Technology driver.

  To resolve this issue, go here: https://downloadcenter.intel.com/download/20868/RAID-Intel-Rapid-Storage-Technology-Driver-for-Intel-Desktop-Boards

  Download and install the version appropriate for your respective operating system.  As soon as it was installed it fixed my Windows Update doesn't work not, error: 8024a 000

  Thank you

  Orrin