Syntax/options of anomaly detection

Similar Questions

• Anomaly detection

  Guys,

  I need to create my Ko because the current is very very old (09:59:59 GMT-06:00 killed Sep 22 2009) when I try to record manually with the command

  vs0 anomaly detection record MYKB I get an error that says: ongoing attack

  I need to create a new KB and load Méthot rotation does not work because the last KB is very old. I thisk it doesn't work because there's ALWAYS an attack.

  Can I save a load a KB file manually even if there is an attack in progress?

  If not, how can I solve my problem

  Thank you

  CPSC DiegoCR

  Hi Diego

  You can fix this by:

  1. Enable detection of anomaly (operational-idle mode)
  2. Delete/copy/load the necessary files and start the anomaly detection or preferably put the sensor in learning accept mode (see operating mode) and wait 24 hours.

  BR

  Johan Kellerman

• No option "disable front jack detection."

  I am looking for a way to disable my audio jack for my laptop Lenovo Y570, but the option 'disable the detection of front jack' does not appear in the Realtek HD audio Manager.  I spent a long time of research, but the only help I could find mentioned change BIOS options advanced that I do not have access to.  Any help by disabling my audio jack would be greatly appreciated, thank you!

  Hello

  This question relates to the material. I would like you to contact the manufacturer of the computer for assistance on the issue.

  Note: Changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• VPNClient. How can I get options of DHCP (ISA) by the ASA?

  PC connects to the ASA by VPNclient. Remote PC got firewall client (Microsoft). DHCP for VPN clients runs on ISA (inside ASA). ASA is a VPN concentrator. I get only the IP address of the DHCP server, but Option 252 (automatic detection for the firewall and the Web Proxy Clients) does not pass to customer (PC). How can I inject DHCP Cisco VPN client options.

  Group vpnX policy attributes
  value of 10.122.104.137 DNS server (ISA)

  Protocol-tunnel-VPN IPSec
  allow password-storage
  enable PFS
  Split-tunnel-policy tunnelall
  Split-dns no
  DHCP-network-scope 10.122.10.0

  tunnel-Group X type remote access
  tunnel-group X general attributes
  authentication-server-group IAS_X

  Group Policy - by default-vpnX
  password-management

  DHCP-server 10.122.104.137 (ISA)
  tunnel-group X ipsec-attributes
  pre-shared-key *.
  ISAKMP keepalive retry threshold 60 10

  Tomasz,

  Customer does not have DHCP for the SAA. ASA talks to the DHCP server in the background.

  Everything you want as a customer know about you must send within the config mode.

  By the looks of it, it will be linked to the Internet Explorer proxy settings.

  Following long ago improvement request filed for this problem.

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsr53828

  Marcin

• The syntax coloring does not work on Windows high contrast Theme

  -On Windows 10, if I use the default theme, coloring syntax works fine.

  -If I switch to my custom high-contrast dark theme Windows (black window background, white text), the text in Code view or the Code Inspector is a single color (white on black), and "Color Syntaxing" option is grayed out. So, it seems that Windows themes replace Dreamweaver.

  -If I switch to the default theme Windows 10, then turn on syntax coloring, then switch back to my high contrast theme, a few syntax colors stay, as tags HTML object, but most of the text turns white.

  - So I think that it is a bug fix / feature request: Please make Dreamweaver code replace Windows themes like the other apps do (Notepad ++ for example).

  My specs:

  Dreamweaver 2015.1 release, Build 7851

  10, 64-bit Windows Home

  In fact, not really a bug, but more than one function of wondering who I'll introduce.  Is not sound as there is no current workaround solution other that temporarily switching Windows to a theme non-haut contrast.

  I look forward to the update Dreamweaver CC 2016 which I've heard will bring a dark theme in the user interface.  Now, it would be just great if Windows 10 allowed customization of it of regular hardware accelerated theme and not relying on high contrast mode, which should legitimately outweigh everything else since this is a feature of "accessibility".

• Detect wrap them edge does not

  Hello

  I'm working on something at home that I brought to the work. I'm working on Snow Leopard (if it matters) at home, but using CS4 on Mac.

  The text wrapping, edge detection seems to have failed where he worked at work... It's that I have not changed anything else than opening the file on my Mac at home...

  I wonder if there is a global setting, I'm missing, or there are problems reported...? I've never had problems with it before. The text should be wrapped around the image at the bottom right...

  Thanks in advance... Chris

  

  Not sure why it happened. But try to go to object > Clipping Path Options, and choose detect edges from there?

• Failed to update of the signing of the AIP-SSM-10

  I hope someone can help me, I am unable to get the signature autoupdate working on our ASA 5510 IPS. We have a valid support contract, our user name does not include and special characters, and I am able to download the files of signature on the site by using our BCC.

  When trying to get through Auto/cisco.com update if I get the following in the event logs each attempt update:

  evError: eventId = 1319467413849005289 = severity = error Cisco vendor

  Author:

  hostId: xxxx

  appName: mainApp

  appInstanceId: 354

  time: October 26, 2011 11:40:01 UTC offset = 60 timeZone = GMT00:00

  errorMessage: AutoUpdate exception: failed to connect HTTP [1 111] name = errSystemError

  I've included a conf 'show' and a 'facilitator stat"below.

  See the XXXXXX conf #.

  ! ------------------------------

  ! Current configuration last modified Wed Oct 26 10:48:07 2011

  ! ------------------------------

  ! Version 7.0 (6)

  ! Host:

  !     Domain keys key1.0

  ! Definition of signature:

  !     Update of the signature S604.0 2011-10-20

  ! ------------------------------

  service interface

  output

  ! ------------------------------

  authentication service

  output

  ! ------------------------------

  rules0 rules for event-action service

  output

  ! ------------------------------

  service host

  the network settings

  Host-ip 10.x.x.x/24,10.x.x.x

  hostname xxxxxx

  Telnet-option turned off

  access-list 10.x.x.x/32

  access-list 10.x.x.x/16

  access-list 10.x.x.x/32

  primary-active DNS server

  address 10.x.x.x

  output

  secondary-server DNS disabled

  tertiary-disabled DNS server

  output

  time zone settings

  offset 0

  standard time-zone-name-GMT00:00

  output

  NTP-option enabled-ntp-no authenticated

  Server NTP 10.x.x.x

  output

  Summertime-recurring option

  Summertime-zone-name GMT00:00

  Start-summertime

  last week of the month

  output

  end-summertime

  month October

  last week of the month

  output

  end-summertime

  month October

  last week of the month

  output

  output

  automatic update

  Cisco-Server enabled

  scheduling periodic-calendar option

  beginning 00:40:00

  interval 1

  output

  username xxxxxxxxxxxxxxx

  Cisco-url https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl

  output

  output

  output

  ! ------------------------------

  service recorder

  output

  ! ------------------------------

  network access service

  output

  ! ------------------------------

  notification services

  output

  ! ------------------------------

  Service signature-definition sig0

  output

  ! ------------------------------

  Service ssh-known-hosts

  output

  ! ------------------------------

  trust-certificates of service

  output

  ! ------------------------------

  web-server service

  output

  ! ------------------------------

  Service-ad0 anomaly detection

  output

  ! ------------------------------

  service interface external product

  output

  ! ------------------------------

  health-monitor service

  output

  ! ------------------------------

  service global correlation

  output

  ! ------------------------------

  aaa service

  output

  ! ------------------------------

  service-analysis engine

  vs0 virtual sensor

  Physics-interface GigabitEthernet0/1

  output

  output

  XXXXXX # host stat

  General statistics

  Last updated to host Config (UTC) = 27 October 2011 08:27:10

  Control device control Port = GigabitEthernet0/0

  Network statistics

  = ge0_0 link encap HWaddr 00:12:D9:48:F7:44

  = inet addr:10.x.x.x Bcast:10.x.x.x.x mask: 255.255.255.0

  = RUNNING UP BROADCAST MULTICAST MTU:1500 metric: 1

  = Dropped packets: 470106 RX errors: 0:0 overruns: 0 frame: 0

  = Dropped packets: 139322 TX errors: 0:0 overruns: 0 carrier: 0

  = collisions: 0 txqueuelen:1000

  = RX bytes: 40821181 (38.9 MiB) TX bytes: 102615325 (97.8 MiB)

  = Address: 0xbc00 memory: f8200000 of base-f8220000

  NTP statistics

  = distance refid st t when poll reach delay offset jitter

  = * time.xxxx.x 195.x.x.x 3 u 142 1024 377 1, 825 - 0.626 0.305

  = L LOCAL (0) LOCAL (0) 15 59 64 377 0.000 0.000 0.001

  = ind assID status conf scope auth condition last_event cnt

  = 1 43092 b644 Yes Yes No sys.peer 4 available

  = 2 43093 9044 Yes Yes No accessible release 4

  status = synchronized

  Memory usage

  usedBytes = 664383488

  freeBytes = 368111616

  totalBytes = 1032495104

  Statistics of Summertime

  Start = GMT00:00 03:00 Sunday, March 27, 2011

  end = GMT00:00 01:00 Sunday October 30, 2011

  Statistics of the processor

  Its use in the last 5 seconds = 51

  Its use during the last minute = 44

  Its use in the last 5 minutes = 50

  Memory statistics

  Use of memory (bytes) = 664383488

  Free MEMORY (bytes) = 368111616

  Auto Update Statistics

  lastDirectoryReadAttempt = 08:40 GMT00:00 Thursday, October 27, 2011

  = Reading directory: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl

  = Error: Auto update an exception: failed to connect HTTP [1 111]

  lastDownloadAttempt = n/a

  lastInstallAttempt = n/a

  nextAttempt = GMT00:00 09:28 Thursday, October 27, 2011

  Auxiliary processors installed

  Thank you very much.

  Your error message indicates "HTTP connection failed."

  Management interface you can access the internet via HTTP sensor?

  You have a proxy between the sensor and the internet?

  Can you ping the sensor to open internet IP addresses (like google.com)?

  -Bob

• IPS (7.0 (7) E4) on ASA-SSM-10 block DNS without alerts

  Hi all

  I have the IPS module:

  Build version: 1.1 - 7, 0000 E4

  ASA 5500 Series Security Services Module-10

  Update of the signature S652.0 2012-06-20

  Journal of the ASDM inferred events:

  4 June 26, 2012 18:21:47 193.227.240.38 53 IPS 65347 sd-out asked to drop the UDP packet from outside:193.227.240.38/53 to dmz1:sd - outside/65347

  But the IPS not deducted from alerts - it does not explain why blocking these packets. DNS requests cannot just one network.

  ! ------------------------------
  ! Current configuration last modified Tue Jun 26 18:01:58 2012
  ! ------------------------------
  ! Version 7.0(7)
  ! Host:
  !     Realm Keys          key1.0
  ! Signature Definition:
  !     Signature Update    S652.0   2012-06-20
  ! ------------------------------
  service interface
  exit
  ! ------------------------------
  service authentication
  exit
  ! ------------------------------
  service event-action-rules rules0
  filters edit PROXY
  attacker-address-range 192.168.72.7
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit Q00000
  signature-id-range 5684
  attacker-address-range 95.190.8.0-95.190.8.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit Q00001
  signature-id-range 5684
  victim-address-range 95.190.8.0-95.190.8.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit USERS
  signature-id-range 1102,5237,2152,5684,2100,5581,3030,6061,3030,11020,5403,5474,20020,60000-60100
  attacker-address-range 192.168.0.0-192.168.255.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters edit USERS2
  signature-id-range 5575-5591,2151,21619,2150-2151
  attacker-address-range 192.168.0.0-192.168.255.255
  victim-address-range 192.168.0.0-192.168.255.255
  actions-to-remove deny-attacker-inline|deny-packet-inline
  os-relevance relevant|not-relevant|unknown
  exit
  filters move PROXY begin
  filters move USERS after PROXY
  filters move Q00000 after USERS
  filters move Q00001 after Q00000
  filters move USERS2 after Q00001
  general
  global-deny-timeout 14400
  exit
  target-value low target-address 192.168.0.0-192.168.255.255
  target-value medium target-address 192.168.1.0-192.168.1.255,192.168.64.0-192.168.64.255,192.168.3.0-192.168.3.49,192.168.65.128-192.168.65.255
  target-value high target-address 192.168.72.2-192.168.72.254,192.168.66.0-192.168.67.255,192.168.2.0-192.168.2.255
  target-value mission-critical target-address 192.168.65.0-192.168.65.127
  os-identification
  calc-arr-for-ip-range 192.168.0.0-192.168.255.255
  exit
  exit
  ! ------------------------------
  service host
  network-settings
  host-ip 192.168.64.194/24,192.168.64.1
  host-name gw1-ips
  telnet-option disabled
  access-list 192.168.0.0/16
  dns-primary-server enabled
  address 192.168.66.2
  exit
  dns-secondary-server enabled
  address 192.168.72.19
  exit
  dns-tertiary-server enabled
  address 192.168.72.20
  exit
  exit
  time-zone-settings
  offset 360
  standard-time-zone-name GMT+06:00
  exit
  ntp-option enabled-ntp-unauthenticated
  ntp-server 192.168.64.1
  exit
  summertime-option disabled
  auto-upgrade
  cisco-server enabled
  schedule-option calendar-schedule
  times-of-day 04:20:00
  days-of-week sunday
  days-of-week tuesday
  days-of-week thursday
  days-of-week saturday
  exit
  user-name dimaonline
  cisco-url https://198.133.219.25/cgi-bin/front.x/ida/locator/locator.pl
  exit
  exit
  exit
  ! ------------------------------
  service logger
  exit
  ! ------------------------------
  service network-access
  general
  enable-acl-logging true
  never-block-networks 192.168.0.0/16
  exit
  exit
  ! ------------------------------
  service signature-definition sig0
  signatures 60000 0
  alert-severity low
  sig-fidelity-rating 50
  sig-description
  sig-name XPress Administrator Service
  sig-string-info Access to Administrator Service
  sig-comment External user open Admin
  sig-creation-date 20120622
  exit
  engine service-http
  max-field-sizes
  specify-max-uri-field-length no
  exit
  regex
  specify-uri-regex yes
  uri-regex [Aa]dministrator[Ss]ervice[.]asmx
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  vulnerable-os windows-nt-2k-xp
  specify-mars-category yes
  mars-category Info/Misc/Login
  exit
  exit
  signatures 60000 1
  alert-severity low
  sig-fidelity-rating 50
  sig-description
  sig-name Xpress Bridge
  sig-string-info Service URL
  sig-comment External Access to bridge
  sig-creation-date 20120625
  exit
  engine service-http
  regex
  specify-uri-regex yes
  uri-regex [Bb]ridge[/][Ss]ervice[.]asmx
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  status
  enabled true
  exit
  specify-mars-category yes
  mars-category Info/Misc/Login
  exit
  exit
  signatures 60001 0
  alert-severity high
  sig-fidelity-rating 90
  sig-description
  sig-name FreePBX Display Extentions
  sig-string-info Acces to Extentions settings
  sig-comment Weak Password Detection
  sig-creation-date 20120622
  exit
  engine service-http
  event-action produce-alert|deny-attacker-inline
  regex
  specify-uri-regex yes
  uri-regex [/]admin[/]config[.]php
  exit
  specify-arg-name-regex yes
  arg-name-regex display
  specify-arg-value-regex yes
  arg-value-regex (extensions)|(trunks)
  exit
  exit
  exit
  service-ports 80
  exit
  event-counter
  event-count 1
  event-count-key Axxx
  specify-alert-interval no
  exit
  alert-frequency
  summary-mode summarize
  summary-interval 15
  summary-key Axxx
  specify-global-summary-threshold no
  exit
  exit
  exit
  exit
  ! ------------------------------
  service ssh-known-hosts
  exit
  ! ------------------------------
  service trusted-certificates
  exit
  ! ------------------------------
  service web-server
  enable-tls false
  port 80
  exit
  ! ------------------------------
  service anomaly-detection ad0
  internal-zone
  enabled true
  ip-address-range 192.168.0.0-192.168.255.255
  tcp
  enabled true
  exit
  udp
  enabled true
  exit
  other
  enabled true
  exit
  exit
  illegal-zone
  enabled false
  tcp
  enabled false
  exit
  udp
  enabled false
  exit
  other
  enabled false
  exit
  exit
  ignore
  source-ip-address-range 192.168.0.0-192.168.255.255
  exit
  exit
  ! ------------------------------
  service external-product-interface
  exit
  ! ------------------------------
  service health-monitor
  signature-update-policy
  enable false
  exit
  license-expiration-policy
  enable false
  exit
  event-retrieval-policy
  enable false
  exit
  exit
  ! ------------------------------
  service global-correlation
  exit
  ! ------------------------------
  service aaa
  exit
  ! ------------------------------
  service analysis-engine
  virtual-sensor vs0
  physical-interface GigabitEthernet0/1
  exit
  exit
  

  I confirmed with the Ironport team that this IP is a bad host in sensorbase. This is the reason for the traffic of this host being removed. There could be several reasons for this subnet to the list, for example, it could be part of a controlled host known by spammers. You must reach out to the development team for a confirmation however.

• Update Radeon HD 6770 m driver 11,12 or higher

  Hello!

  I was wondering if you could help me to update my graphics Radeon HD 6770 m to 11,12 driver or higher if I could play The Secret World.

  Thank you very much!

  My laptop is a laptop HP Pavilion dv6-6024tx.

  Go directly to AMD and click in the upper right corner for support and drivers. It will give you an option to automatically detect the driver you need.

  http://www.AMD.com/us/products/notebook/graphics/AMD-Radeon-6000m/AMD-Radeon-6700m-6600m/pages/AMD-Radeon-6700m-6600m.aspx

• External monitor works only with the Macbook Pro?

  I just bought a Macbook Pro 15-inch (mid-2015, OS X El Capitan 10.11.4) and planned to connect it to my BenQ GL2450HM (he had since worms 2011 for my Windows PC). I had a DVI adapter for them, but the card connects to the cable correctly (as it goes down easy) and then when I plugged it, the monitor gave me a green light for a bit, but finally displays 'no signal' and the screen went black, and yellow light. But when I pulled the cable out of my monitor, he said "no cable not connected" (implying that he entered the connection somehow before that?)

  So, I read while holding down the option key to detect monitors, but that did not work. Put the laptop to sleep and then wake it up didn't work either. I also tried to plug the adapter to DVI/VGA Converter that I have, but they fit together. I tried to plug the adapter directly to the DVI port on my monitor, but they are not at all together.

  I feel, it should be possible to make the Macbook and monitor work together, but I'm stuck to know exactly what needs to be fixed. Probably the adapter or DVI cable, however. Do you have any suggestions?

  I don't see that this is not possible, so I am that give a bump.

• Tecra A9 bios (PTS52E) half visible?

  Hello

  I have several problems with my laptop Tecra A9.

  By pressing F12 will not let me choose a boot device (cd/LAN/usb/ect..) Off the coast of Toshiba helpdesk told me to try pressing 'c' at startup to boot from the cd, but it does not work as well...
  In the BIOS I see only half on the first page (I can't switch to other pages with page up/down!) so I can not change the startup for example options...

  One?

  PS: there is nothing wrong with the F12 key or the boot devices (cd/lan/usb) works (in an operating system such as XP/linux)

  Usually the F12 or on the button C should be pressed immediately after turning on.
  I have keys always the several times to make sure that the start option has been detected.

  But I wonder about this sentence:
  + In the BIOS I see only half on the first page (I can't switch to other pages with page up/down!) so I can not change the boot options for the instance.

  I think there must be something wrong with hardware or BIOS and I fear that he needed the help of ASP m!

• Changed resolution of the secondary display: cannot reset

  I use a second monitor on my Imac 27 "OS 10.11.3 and have never had a problem with the resolution on the second monitor connected with a VGA cable. Suddenly this morning on this screen resolution is 800 x 600. I can scale, move in 1280 x 1024, have held down the Option key to detect the resolution of more options (the monitor displays the suggested resolution is 1980 x 1080, but I can't find how to add this resolution who worked until today. Puzzled and frustrated.

  Hi we04ndy,

  I understand that you have a problem with the resolution of the screen. Let "see if we can get this sorted out.

  I don't know, after the second article, if you use an Apple Mini DisplayPort to VGA, you will get a 1920 x 1200 max resolution or 1600 x 1200 depending on the discount rate. I would look on the troubleshooting in the first article to review what to do if you get undesirable results with the resolution of your secondary display. I would start with the SMC reset and NVRAM for you get started.

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Apple Mini DisplayPort adapters: frequently asked questions (FAQ)
  https://support.Apple.com/en-us/HT204149

  Nice day

• How turn on built-in bluetooth 4.0 and pair it with a Nokia?

  East - Toshiba Windows 7 race was not a simple On / Off Bluetooth button with an option to be detectable? If not, why? The text of said product integrated Bluetooth 4 makes the devices of connection easy. Well, I tried for 4 hours now-

  Trying to pair my wife with a Nokia 6700 Classic C850 will Bluetooth.

  Bluetooth phone is on & peripheral detectable.

  Interface of Windows 7 (devices & printers) indicates no device at all?

  Toshiba Bluetooth Stack, etc installed drivers from the Web site. Each makes me want to 'connect the Bluetooth device' and hangs while "driver installation"? Do not have the USB cable for the phone, so unable to connect that way. At the end of my mind, not a PC user and now I know why! Any help much appreciated.

  In general, it's fairly easy. In a first time, you must activate the BT device. I think that it is FN + F12 on your laptop.

  Maybe stupid question now but has the BT satellite inside. Can you please send the exact model number and the name of the template? I just want to check the specifications of the laptop.

  Check also Toshiba BT knowledge base on http://aps2.toshiba-tro.de/bluetooth/?page=howto
  You will find documents very useful on the use of BT.

• What is HP Pit Plugin?

  I have Firefox plugins called HP Pit plugin, plugin to control HPActive and HP Product Detection for Mozilla.  Can someone explain that these do and why should I keep them?

  Hello

  These plugins are installed to automatically detect your system so that it can look for updates or model-specific alerts.

  In the HP support and drivers page, you will find an option to automatically detect your laptop.

  These files is dynamically linked with HP Active Support Library which is a set of tools that customers can use to troubleshoot and diagnose problems with their computers also.

  Links below should provide some details on what it does...

  Solution and collection of Diagnostic data

• Satellite L50D-B013 will not play sound

  I bought my Toshiba Satellite L50D-B013 almost 2 weeks, playing very well, all of a sudden yesterday, everything I play, the sound does not work. The videos play, just without the sound. I have not changed the settings, I did not all external chips etc. I ran a virus check to see if it was originally but didn't come with anything. I noticed that he will play however through headphones!

  Can someone help me please? Or I need to get to?

  Thanks in advance.

  *@orlacf*

  First of all, you should check if the speakers are set as default device.
  How? Go to control panel of-> sound-> playback device and select speakers as default device.

  Also, I guess that the Realtek HD audio Manager is available in the Panel.
  Go to start > Control Panel > hardware and sound > Realtek HD Audio Manager

  Now click on the yellow folder that appears in the upper right corner and make sure that the option disable face detection isn't checked. The 2nd option enable auto pop dialog box should be checked and enabled.

  Also click on advanced settings of the device and make sure that this option to Mute the device output isn't checked.