System missing Base, Win 7 HP DV7 driver

Similar Questions

• ProBook 6550 b: driver missing Base system device

  After you have reinstalled Windows 10 on a Probook 6550 b I can't find the correct driver for both devices.

  -Driver missing Base System Device 1:
  Device PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 02E2 requires installation.

  -Lack of pilot system of Base 2 device:
  Device PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 01E2 requires installation.

  Is it possible to put me in the right direction?
  
  Thank you very much.

  Lennard

  Hello

  Try to install the Windows 7 version of the Ricoh Media Card Reader Driver.

  Kind regards

  DP - K

• Missing base system driver?

  Hi all

  Then, I saw this problem listed for other users with other computers, and it seems that it is specific to the computer model of the problem.  So, I have a ProBook s 4540, with a missing base system driver, cannot be updated automatically (when I run the troubleshooter, the driver is not found)... Suggestions?  Thank you!!

  It's the card reader: HERE

• HP Elitebook 8440p missing base system device driver

  I have a HP Elitebook Notebook PC with Windows 7, 64-bit 8440p. I had to reinstall Windows 7 and all the necessary drivers. My question is the missing Base system driver. The message that I get from the Device Manager is:

  Bus PC1 68, device 6, function 2. The driver for this device are not installed (Code 28).

  The hardware in the Details tab ID are:

  Pc1\ven_1180 & dev_0843 & subsys172a103c & REV14

  Pc1\ven_1180 & dev_0843 & SUBSYS_172a103C

  Pc1\ven_1180 & dev_0843 & CC_088000

  Pc1\ven_1180 & dev_0843 & CC_0880

  I you apologize for the irregular use of capital letters, but yes, all uppercase.

  Thank you in advance for your help in this matter!

  I reinstalled the drivers of the two Chipset but I also installed the RICOH Media Driver on the HP driver download site. My problem is now solved, but I think this is the last driver that did the trick I thought others regarding their driver problem of Base system with drivers for the SD card. Thank you.

• driver base system missing for HP PAVILION DV2819TX NOTEBOOK PC S/N 2CE8133HJ7, P/N KU765PA

  PLEASE HELP ME. AFTER FORMATTING MY LAPTOP AND USING THE WINDOWS OPERATING SYSTEM 7, THERE ARE FOUR DRIVERS MISSING BASE SYSTEM. THEIR HARDWARE IDS ARE AS FOLLOWS: -.

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C

  PCI VEN_1180 & DEV_0592 & CC_088000

  PCI VEN_1180 & DEV_0592 & CC_0880

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C

  PCI VEN_1180 & DEV_0843 & CC_088000

  PCI VEN_1180 & DEV_0843 & CC_0880

  PCI VEN_1180 & DEV_0852 & SUBSYS_30CD103C & REV_12

  PCI VEN_1180 & DEV_0852 & SUBSYS_30CD103C

  PCI VEN_1180 & DEV_0852 & CC_088000

  PCI VEN_1180 & DEV_0852 & CC_0880

  ACPI\HPQ0007

  * HPQ0007

  WHERE AND HOW DO I DOWNLOAD THESE DRIVERS.

  Hello

  Download and install the following.

  Ricoh card reader driver.

  HP Quick Launch buttons.

  Kind regards

  DP - K

• Device driver base system missing + volume buttons do not work

  Hello

  I have a SL400 and upgraded to windows 7, sold separately, as I bought before June 29, 2009. I installed the op system and 4.0 thinkvantage system update to install the drivers. Just fine, except 1 thing (actually 2) as Device Manager indicates that it y 2 missing drivers, poster-->--> Device(this displayed 2 times one under like 2 drivers are missing) Base system devices. I don't really know what devices here as it is not indicated. The other problem is that the volume buttons do not work. It is more updated available through the TVT system so update... No idea what can be the problem?

  Thank you

  David

  All right, had basic system--> Ricoh card reader device. Installed the driver and works correctly. The volume buttons still do not work.

• Base system - missing drivers device

  Hello

  I have a ProBook 6560 b and a ProBook 5330 m, they are both new and I just installed WIN PRO 7 SP1 32 - BIT on them and Office 2010, no other software so far.

  The problem is that the two laptops display the 'Base system device' under 'Other devices' in Device Manager. The difficulty is to know what drivers are missing. In addition, the 6560 b docking station doesn't seem to work correctly, some USB ports do not charge and the audio port does not work either. I have a secondary screen connected via DVI and that works very well, also portable across it costs too.

  Any ideas on how I can answer these questions will be very appreciatted.

  Kind regards

  EB

  Hello:

  I would setup the driver chipset first if you have not already done so.

  6560 b

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5045605&prodNameId=5045607&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-96363-1

  For basic system devices, you need the card reader driver.

  6560 b

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5045607&prodTypeId=321957&prodSeriesId=5045605&swLang=13&TaskID=135&swEnvOID=4053#113100

  5330 m

  Chipset

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071212&prodNameId=5071214&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-96363-1

  Card reader:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5071212&prodNameId=5071214&swEnvOID=4053&swLang=13&mode=2&taskId=135&swItem=ob-93389-1

  For any other device that requires drivers (such as strangers), go to the Device Manager and click on each of them, one at a time.

  Then click on the Details tab.

  There, you will now see a drop-down list of properties. Drop down on it and select the second element (Hardware ID).

  After the first string of characters you see in the window for each device.

  Those who will be ID, type, and model devices and I can send you the links to the drivers you need.

  If after you have installed all the drivers, your docking station does not, I suggest that to start a new thread for the docking station does not.

  I never use a docking station so I have not a clue how to go about solving the case.

  I hope this problem with the chipset drivers.

  Kind regards

  Paul

• Base the peripheral system missing for 7 ultimate - HP dv6000 Notebook pc

  Hello people!

  I have 3 missing base system device driver and an unknown device. My pc is a HP Pavilion DV6 laptop

  model number NU765EA #AB9

  The original was VISTA and now I have installed windows 7 ultimate.

  Hardware ID

  Bus PCI 6, device 0, function 4

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Bus PCI 6, device 0, function 3

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  Bus PCI 6, device 0, function 1

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  UNKNOWN device

  the Controller Interface LPC Intel(r) ICH9M - 2919

  ACPI\ENE0100
  * ENE0100

  Thanks a lot for your help!

  Hello

  Download and install the following drivers.

  Card reader.

  Protect HDD Smart Protection.

  Kind regards

  DP - K

• I have a ProBook s 4535 missing base system device

  I have upgraded to Windows 8 and now I have a missing Base system device and can not find the driver

  Hello:

  Download and install the driver for W7/W8 JMicron card reader

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5098225&prodNameId=5098226&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-108947-1&mode=3

  Paul

• Pavilion DV6137ea: Missing base system device drivers

  Device Manager reports 2 missing base system device drivers. Hardware ID are:

  PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C & REV_0A
  PCI VEN_1180 & DEV_0592 & SUBSYS_30BB103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  and

  PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C & REV_01
  PCI VEN_1180 & DEV_0843 & SUBSYS_30BB103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  Hello

  If please try first and check the result then use the other (if necessary):

  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37809.exe
  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37614.exe

  Kind regards.

• HP Elitebook p: 6930 6930 p video, RECOH8BayController, System & other Base drivers

  Hello

  Dear moderator / Expert!

  After moving from Win 7 to win 8.1 on my HP Elitebook 6930p, the following drivers are missed to update.  I'm more worried the graphics driver, the rest of the drivers are not affected one of my machine use. Kindly download the driver (s) followind Guide. I will be grateful.

  • Video controller

  PCI\VEN_8086 & DEV_2A43 & SUBSYS_30DB103C & REV_07
  PCI\VEN_8086 & DEV_2A43 & SUBSYS_30DB103C
  PCI\VEN_8086 & DEV_2A43 & CC_038000
  PCI\VEN_8086 & DEV_2A43 & CC_0380

  • Base system device

  PCI VEN_1180 & DEV_0843 & SUBSYS_30DB103C & REV_14
  PCI VEN_1180 & DEV_0843 & SUBSYS_30DB103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  • RICOH Bay8Controller

  PCMCIA\RICOH-Bay8Controller-F1B2
  PCMCIA\RICOH-Bay8Controller-0000-0000
  PCMCIA\RICOH-0000-0000

  • Unknown device

  ACPI\VEN_HPQ & DEV_0004
  ACPI\HPQ0004
  * HPQ0004

  • Unknown device

  ACPI\VEN_HPQ & DEV_0006
  ACPI\HPQ0006
  * HPQ0006

  Kind regards

  Haroon Zia

  Hello:

  You need these drivers...

  Video: You may need to manually install the driver.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_76460_2&swEnvOid=4059

  System of base & Bay8Controller RICOH device:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870&swItemId=ob_76430_3&swEnvOid=4059

  Unknown device 1:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

  Unknown device 2:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_87706_3

• windows\system32\config\system missing or corrupted display.

  I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

  Provide information on your system, the better you can:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Let me start with this: (never start with KB307545)

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Satellite A75 - config\system missing or damaged

  A month ago I successfully restored all the settings from the factory with the recovery cd for my satellite A75.
  Everything was working well until yesterday, I have received the \windows\system32\config\system missing or damaged.

  My laptop can not read the cd factory restore.
  What I do next. ?

  Another laptop home bed recovery cd I am comfortable that the CD is fine.

  Should my hard drive be replaced?

  Hello

  > Another laptop home bed recovery cd I am comfortable that the CD is fine.
  Seems the CD/DVD drive cannot handle the recovery disk I m not very well why, but you can try to copy this disc (burn on another drive) and then try to use the copied disc in order to restore the operating system.

  In many cases, this could help.

• Need drivers for Win 7 replace Win 8 on dv7 - 7243cl

  Where can I download the drivers for a HP DV7 - 7243cl which has now Win 7 to replace Win 8.

  I found the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-on-dv7-7243cl/TD-p/2161007/page/2

• \Windows\system32\config\system MISSING file of repair

  I have a T400 who HAD an XP Pro operating system... Google chrome has frozen the system and I did a hard reboot and the computer had lost the configuration of the registry file. Microsoft recommends that the oem disc should be used, instead of a commercial version of the operating system. It's my DISLIKE for the purchase of a laptop computer with the OEM software, without a backup disk. If there is a problem, the manufacturer generally is going to drag you dry. I thought that this stratagem of Toshiba, but not of Lenovo. Hell, you can't even ask 'em to a disk if you are out of warranty. Stone wall. Why is it not possible to ask even an OEM Lenovo restore disk? Unless you have the security privileges, there is no way to even ask a repair disc: repair file \windows\system32\config\system MISSING this thread has addressed the topic of config file missing and from the looks of it nothing of this worked when even though the guy has abandoned and performed a clean installation and lost three days : http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/How-to-repair-corrupt-windows-system32-c... This is not the problem of problems it's despair. I have a lot of files on that drive the need for recovery. I just want to get some tips on how to record what I have and do not go the trouble to reinstall my entire library of software and then having to reinvent my lost files. Ridiculous. Where there is an article on what works?