Systems compatibility

Similar Questions

• The statement says operating system compatibility pack is Windows NT6.0 I use Vista

  I'm trying to declare on the 7.1.20110512W using Add-on Compatibility Reporter 0.8.7 toolbar add-on. When I click 'compatibility' and select 'that add still works' compatibility box operational information system States: "Windows NT 6.0" is supposed to be my operating system? Windows Vista is my operating system here at work, and the Google toolbar works. On my home computer, the operating system is Windows XP and I've yet to be able to get the Google toolbar to work. I'm still working on it.

  http://en.Wikipedia.org/wiki/windows_nt

  Windows NT 6.0 can refer to these releases of Microsoft Windows:
  Windows Vista
  Windows Server 2008
  

  NT 5.1 is Windows XP.

• 5.0 operating system compatibility mode

  Hello

  I have successfully used this property jad to install OTA with the original Storm 9500 on OS 4.7:

  RIM-TouchCompatibilityMode: false

  However, it is not working touchscreen OS 5.0 devices.

  My application is compiled with JDE 4.7.

  If I download on a Storm II (5.0.0.334 - 9550), it will always be in compatibility mode, even with the property defined in the jad.

  Also the 9500 on 5.0.0.252 does not behave as expected:

  If I download an application compiled with JDE 4.2 it comes into compatibility mode.

  But if I compile the same application against the JDE 4.7 it won't in compatibility mode.

  I'm wiping the Simulator each between each test.

  Has anyone else seen elsewhere?

  Or y at - it some new system that I must follow to ensure that my application will not start in compatibility mode for OS 5.0 devices?

  Thank you

  Hi Mark,

  Finally, there is a problem in my download script where a code is compiled with the a previous JDE was included.

  Its solved now.

  Thanks for looking into it.

• Guest operating system compatibility

  Dear team,

  We have mix U1 ESX5.1 and ESXi5.5U2 environment. We are palnning to deploy Windows 2012 R2 on U1 ESXi5.1 host, I want just to cofirm will, I was able to migrate 2012 SMV of ESXi5.1U1 to ESXi5.5U2 I found that there are a few incompatibity with mixed version as shown below KB. I would also like to confirm that they said that this applies to 5.0.x and 5.1.x.

  

  need your urgent help on the same.

  concerning

  Mr. VMwrae

  Ko 2033723, the affected guest operating system is Windows Server 2012 (not R2) and hosts ESXi 5.0 Update 1 or ESXi 5.0 P03... then I think you should just avoid using this version of the build host, given that the VMware compatibility shows that Windows Server R2 2012 is compatible only with ESXi 5.0 Update 2 and later versions.

  On the other KBs, make sure to read workaround, and everything will be OK.

• A Portable hard drive operating system compatibility

  I bought a Seagate Expansion Portable hard 3 TB drive and want to transfer the files on my old PC (which uses the operating system WIN XP) on my new PC (which uses the operating system WIN 7). When I connect the camera on my old PC, it is not displayed in "My Computer", but it can be seen under "sensor external hard drive... I followed the suggestion of Seagate to reformat the device in the MBR format but persists above. Is there a way I can connect to my old PC so that I can transfer the data via portable hard drive? Or is there a driver I can install to fix the problem?

  AA

  Did you leave the 1 partition of 3 TB drive?  XP cannot 'see' as large partitions. It can 'see' up to 4 GB.  I would create a second partition 25% larger than the data on the XP machine by reducing the current partition and creating a new.

  The best way to proceed is to use EaseUS partition magic (free)

• Webcam with operating system compatibility

  Original title: is this windows xp or windows 7

  I try to get info.on webcams and compatibility between software xp or 7 what works and what does not. bare with me I'm not a very fast typist or the correct spelling, I have xp will only be the cam software w long to do the work I want to just talk to friends, no big deal

  Read the description of the product.  If the site does not specify, either you make on another website or email/phone for more information.

  Most webcams sold today should be compatible with Windows XP (sp2 or sp3), Vista and Windows 7.

  Out of curiosity, what adapter USB wireless purchased which is not compatible with Windows XP?  "Did not work" does not necessarily mean ' not compatible with '-it is always possible to receive the defective hardware.

• Mac with CS4 programs operating system compatibility

  I have an imac 2009 8 running OS 10.6.8 with Creative Suite 4 installed. I can upgrade to El Capitan and there still be compatible with my Creative Suites? And I would be able to upgrade my Yosemite to El Capitan on my laptop (2010 macbook pro) runs the same programs?

  Maybe, but maybe not... and Adobe is only updated of CURRENT programs to be compatible with the new OS (Mac and Windows)

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Operating system compatibility still CS6 Adobe [Mac El Capitan]

  Adobe Encore CS6 works OK with the last February 2016 El Capitan far?

  Migration of Mac with Time Machine NOT WORK with Adobe program activations due to hidden folders are not included when Migration or Time Machine make their copies

  You have to disable everything that you do not use your old Mac, and then perform a new installation on your new Mac

  CS6 installing on a new Mac is VERY likely going to be a problem (it was for others, which is where I got the links below)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Backlit keyboard Inspiron 14R 5420 systems compatibility

  As my 14R does not come with backlit keyboard and when I read that the keyboard of the other model will not work for 5420, I want to know which motherboard 14R a cable connector or as something to take care of a feature of backlit? If yes then should work perfectly if I replace keyboard with another company?

  It seems that there is a backlit keyboard for your model:

  >

  This one is in Spanish but there may be other options.

  Nothing else that an original Dell keyboard will fit - the keyboard is the owner (like just about every portable computer keyboards).

• You want to install Windows 7 on a different partition... course Windows XP operating system

  Hello

  I want to install Windows 7 on another drive... I checked my system compatibility by Upgrade Advisor. He advised me to do a custom installation. But I want to keep Windows XP with Windows 7. Is it possible to install windows 7 without performing a new installation. This will affect XP.

  Thank you

  Windows Update has nothing to do with the upgrade of Windows. Please post future questions to 'modernize' a Windows XP to Win7 computer in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_install-windows_7

  If you install Win7 on another drive or the boot drive, it'll still be a clean install.

  "Redevelopment" a computer Windows XP to Win7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  .. .to Win8.1

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-Vista-XP-tutorial

• XP service pack 3 compatibility. __

  I have been unable to find out what support for the operating system above stopped or will stop and all the tracks on the site of MS to find software and hardware compatibility ends without answers.

  Specifically, I had great difficulty establishing Epson NX415 in my XP service pack 3 operating system. Epson claims it's XP problem. I have finally done installation but always error message when I turn on the NX415 installation failed - "color invalid profile" I simply ignore that both the scanner and the printer works now from this computer. Installation on a laptop with Windows 7 has been flawless - no error - no problems - but I started by downloading the drivers from Epson online and avoided using the CD as it does not list Windows 7 on CD - ergo research of hardware and software on the site of MS re the NX415 and XPpro Service pack 3 32-bit system compatibility.

  I have been unable to find out what support for the operating system above stopped or will stop and all the tracks on the site of MS to find software and hardware compatibility ends without answers.

  Specifically, I had great difficulty establishing Epson NX415 in my XP service pack 3 operating system. Epson claims it's XP problem. I have finally done installation but always error message when I turn on the NX415 installation failed - "color invalid profile" I simply ignore that both the scanner and the printer works now from this computer. Installation on a laptop with Windows 7 has been flawless - no error - no problems - but I started by downloading the drivers from Epson online and avoided using the CD as it does not list Windows 7 on CD - ergo research of hardware and software on the site of MS re the NX415 and XPpro Service pack 3 32-bit system compatibility.

  There is a lot of confusion and mislead of information available on the Internet on "end of support" for Windows XP and Microsoft doesn't make things easier.  As nearly as I can determine, Microsoft will continue to provide updates of security (via Windows/Microsoft Update) until April 2014.  See, for example, http://www.zdnet.com/blog/bott/xp-in-2020-not-even-close-read-the-fine-print/2270?tag=mantle_skin;content

  The foregoing is completely irrelevant to your problem to install an Epson NX415 on Win XP sp 3.

  Whenever 1 it reseller says, 'the problem with my product is computer dealer of 2 problem', the consumer is one who has the real problem.  If you are going to rely if Epson fails to support his product and ask for help here, it would be helpful if you explain exactly what Epson claimed was the problem with Windows XP. Or do you have Epson technology not simply say: 'we cannot understand it. It must be a Windows problem. »

  Can you describe the "great difficulty", that you had to install the Epson software?

  In general, the best way to deal with printer problems is to completely uninstall the printer and all related software and then start again.  I can understand that you may be somewhat reluctant to do so given the time and you have already apparently devoted an effort, but that is my suggestion.

  The driver and software package for your printer for Windows XP 32-bit is available from Epson here:http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=128287&prodoid=63083741&infoType=Downloads&platform=Windows (it seems in fact that if the same package is for XP, Vista and Win 7, then you already on your computer in Windows 7).

  Download the package and follow the instructions here to clean your old s/w before installing the new:http://www.coribright.com/windows/Article_One.htm

  You can also use this: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  If I were you, I disconnect the computer from the Internet and turn off your antivirus application completely and all other anti-malware applications before starting the installation of the printer software.

  You might even go so far to start msconfig (start > run > msconfig > OK), perform the following steps:

  • Click on "Select Startup" and uncheck "Load Startup items".
  • Go to the Services tab, click the box for "Hide all Microsoft services", and then click "disable all".
  • Click OK
  • Restart the computer before proceeding with the installation of the printer software.

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• HP 15-r065tu: window compatibility issue

  I installed app Winavr 20100110 which is 3rd party application... when I use it as an administrator... it gives fatal error when compiling... this system compatibility... Mr .so tell me solution what can I do I feel comfortable with it...

  Contact the people on sourceforge, coded the app and ask them why their program does not work.

  http://sourceforge.NET/projects/WinAVR/files/WinAVR/20100110/

• Are obsolete root of trust certificates required to use XP mode / compatibility mode on my Windows 7 computer?

  For example, I have two PKI certificates that are necessary and confidence of Windows XP, but they are absent from the trust list in Windows 7:

  Why are these certificates on a Windows 7 computer?

  It is the responsibility of the administrator to remove certificates that have exceeded their expiration date?

  That would limit comparability to turn back? Would be the removal of expired certificates limit the functionality of the operating system compatibility modes?

  Hi Douglas,.

  According to the shooting, description and screen of the problem it seems that you are connected to a domain environment. Yes, you are right that these certificates on a computer Windows 7 requires administrator permissions to remove. However, if you need additional support, you can try to republish your query on the TechNet community.

  Hope that the information provided was useful. Feel free to post on the forum if you have any concerns more associated with Windows.

  Kind regards

• Cisco telepresence video Communication Server (VCS) - compatibility CTX X8.1.1?

  The Cisco TelePresence Exchange System compatibility matrix (CTX) does not cover version of VCS X8.1.1 (to solve the problem of software). Version X7.2 is recommended and supported which is affected by "heartbleed".

  X8.1.1 compatibility is tested by Cisco and the updated matrix?

  In fact we run CTX v1.3 with VCS X7.2 and solve the problem of software without leaving the support. What is the recommendation of Cisco?

  Kind regards

  C.Opwis

  You could improve your VCS to X7.2.3 which includes a fix for Heartbleed.