T23 Dongle USB or PCMCIA Sierra card

Similar Questions

• Satellite L300-1DN: brocken USB ports - PCMCIA USB card does not fit

  My granddaughter broke the USB ports leaving the dongle and it banging as she wore the portable peasantry.
  We advised me to buy a Belkin USB 2.0 notebook card and slide it into the slot on the side of the laptop but it does not seem appropriate.
  I am a novice in computers and would welcome that any help however basic.

  Eric

  Hello

  Satellite L300-1DN was equipped with the EXPRESS CARD slot.
  You can use the ExpressCard/54 card.

  Have a look here on the Wikipedia page:
  http://en.Wikipedia.org/wiki/ExpressCard

  Welcome them

• Using a USB or PCMCIA card standard instead of inside 4965AGN wireless

  
  

  OK so I bought a Linksys WPC100 which is a map of connection Wi - Fi G CardBus PCMCIA cardbus.

  It's interesting in the local BestBuy the majority of (USB and PCMCIA) adapters does not list Vista as one of the systems they support. Also strangely even those with a Vista Certified logo the majority does not list Vista as one of their supported operating systems. Clearly something non-intuitive to be certified Vista or the specifications of the box are usually not correct. I got the list of drivers from the Linksys web site with me and it didn't correlate even as a subset or a superset with certification or registration with the operating system as support of Vista. In fact not a single adapter had all three factors, a driver available on the linksys website, certification and operating system listed as supported. Go to this by now mild frustration I bet on the WPC100. The driver on the disk installed and used the Vista Business card form.

  When the computer is started with the installed card (I did not test the behavior with the night before and sleep or insertion during execution is enough for the moment to say) then the map appears as a second wireless adapter. Connection Manager indicates that the integrated map of AGN is either disabled by the switch hardware or BIOS and Connection Manager does not work. It's OK. At least we know where we are and the connections are not visible by Vista is from the PCMCIA card.

  Unfortunately, problems with the access point has continued so this whole exercise has shown me is that the problem is related to using Vista with the access point and not the hardware or driver (unless the problem is common to both drivers). Thus, one step forward and one step backward. As usual, the real cause of our time wasting is Vista, but for those who have a reason to try, you can install a separate adapter, it's just that you can not use Connection Manager to switch between them on the basis for example, location.

• Satellite 1400-103: do I need a Wlan switch use a PCMCIA WiFi card

  I have been using broadband through my usb ports on the fixed network and have recently upgraded to wireless router hub to give me the portability. Having realized that my hub router does not come with a pcmcia card or of dongel I am looking to buy a pcmcia (pc card) card.

  My problem is that the laptop will allow wireless comms since there is no wire pass under the floppy drive as described in the manual and on later versions. Do I have this switch or card pcmcia will do everything what I need (there are two slots for cards available and the manual talks about ability CardBus).

  Do I have to worry about the ability of Wireless LAN in my computer or the pcmcia card will do everything?

  Ideally, I would just buy the pcmcia card, plug it in (plugnplay pilots to kick XP) and I won ' t need to do much more.

  Any advice on this would be appreciated before that I have spend £ 20 on a 32-bit pcmcia wireless card.

  concerning

  Andrew

  I agree with chain.
  The minPCI wireless network card is not removable on an easy way and therefore the hardware switch is to enable and disable the WLan functionality in different situations.

  The PCMCIA card is an external card, which can be removed in 2-3 sec.
  The withdrawal of this card will also disable the WLan functionality.
  Accordingly PCMCIA cards don t need the hardware like wireless minPCI network card switch

• USB to pcmcia?

  Greetings,

  Just got a new computer @ work & it's not a PCMCIA slot.  I do a lot of development using 6036 series cards, PCI and PCMCIA.  Did anyone tried a USB to PCMCIA with the DAQCard-6036E multi i/o?

  Speaking of something similar to this... http://www.elandigitalsystems.com/USB/U111.php

  Thanks in advance,

  Rob

  Hello Rob,

  Here's another thread that relates to your question.

  Kind regards

  Jeff L.

• Pavilion P6520F: p6520f driver usb 3.0 pci card

  To make a long story short, with assistance from HP Support Forum's, I've recently restored to my Pavilion P6520F leave an 'upgrade' forced Windows 10, back to Windows 7.  Unfortunately, when I accidentally upgraded to Win 10, my card usb 3.0 pci card decided to die in the transition (not compatible with Win 10).  I replaced the card with a PCI-E DEGOL Express USB 3.0 Card 4 Ports and power connector 4-pin 5V for desktop computers [ASIN: B01FUE7IS2].  The map loaded and worked like a champ... Until I started Windows 7.  Now Windows 7 can not find a driver for it, and provided driver disk will not load a driver for Windows 7.  I contacted the seller, and they assured me that the card must be compatible Windows 7.  Is there a generic driver online of these cards USB 3.0 can I load to bring back my new card?  Unfortunately, I threw the old card, if I can't relive the Degol map, I'll have to buy a new card.

  All advice appreciated!

  Hello

  USB for Windows 7 drivers are the supplies made by the manufacturer of the card.

  You must debug the problem if the DEGOL W7 driver does not load. Generally, you will see an error code in Device Manager for your USB card. This could give you some advice.

  HP is not post drivers for third party material.

• ASUS USB 3.1 PCI card in the Mac Pro 4.1/5.1

  Hello

  As the proud owner of a Mac ro 4.1 (updated to 5.1 and 2 X of Hexa-Core Xeon X 5670 CPU) I "suffer" a restriction.

  And it is now old and really slow USB 2.0.

  I would like to add a PCI USB 3.1 and I spotted the ASUS USB 3.1 PCI card.

  Of course, this card is given only as compatible with Windows...

  But I've seen a few reports of people claiming to have inserted this card in their Mac and have used successfully with several devices.

  It seems that these reports are under "Yosemite".

  I was wondering if they are always good with El Capitan...

  I put the card in the Mac.

  It seems to be recognized by the Mac Pro.

  In fact looking at the system information, under "PCI" give "Expansion USB card".

  BUT:

  -No USB key I have insert mounts;

  -No USB stick plug mounts;

  -my mouse lights

  -the keyboard does not work...

  So I'm wondering if:

  -El Capitan has got rid of the first USB support 3.1 to Yosemite?

  - Or if my card can be default somehow?

  -If this behavior can be caused by updates, I made (Mac 4.1-5.1 online) + 8-Core CPU-online 12 Core CPU?

  If anyone would be able to help me, I would be eternally grateful :-)

  If so, the card can be sent to the seller...

  Kind regards.

  FRED

  Hello there Penguiner.

  Looks like you bought the ASUS USB 3.1 PCI card and questions about its compatibility with your Mac Pro. The following Knowledge Base article speaks to the maps provided by Apple which have been tested and work with the Mac Pro:

  On the compatibility between Mac Pro-carte models graphics

  Since the ASUS card is not listed, the reference of the article could be a good recommendation to follow:

  This article applies only to video cards that originally shipped with a specified Mac Pro or upgrade kit have been offered by Apple. Similar maps that are not provided by Apple may have compatibility issues and you have to work with this card provider to confirm compatibility.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• PCI USB 3.0 Express card does not work

  Discription of the system:

  • HP Pavilion Elite HPE-520nl desktop PC
  • Processor Intel Core i7 - 2600
  • Memory 6 GB
  • Windows 7 Ultimate 64 bit
  • Service Pack 1
  • The map of USB 3.0 pci card the "HP-lable" is printed. Therefore an alaaa by HP original card.

  My HD portabale with USB3.0 interface is not recognized. Also all USB 2.0 memory sticks are NOT regonised by this card pci of USB 3.0.

  I searched on the web, this forum ect. and posible all software and drivers updated.

  Now at least there's no sign of escalmation in the Windows Device Manager.

  There are no errors in Windows and by double clicking on each and evry device a puppy window says: "device is functioning! (But when I put in a usb in the port USB3 device, nothing happens, not even a new drive appears under 'Computer'.)

  OK maybe the card is the default, so I bought at a local PC store a new one (Konig CMP-PCIE2USB3), but same problem.

  Well maybe the PCI slot is the problem... I put the card HP in the free location. But still no luck.

  Now I have 2 PCI USB 3.0 Express card in my office, but no USB 3.0 for my USB 3.0 devices connection.

  All USB 2.0 ports are working well.

  Help, please.

  

  I uninstall the original card and don't forget to remove the driver. Then install the Konig CMP-PCIE2USB3 and install the driver from the Web site. Don't forget to attach the molex 4 pin of your power supply.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• What is the correct USB 3.0 PCIE card for Z800?

  I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

  Hello

  Based on the following specifications, the machine has a lot of options:

  http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

  You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

  http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

  You should check the slot to get the support of the card right.

  Kind regards.

  PS eBay is another story, you can buy some card dollars.

• Problem with ZTE MF190 Dongle (USB Stick Modem)

  I have a ZTE MF190 Dongle (USB Stick Modem), which is a plug-and-play device. It was to find work on my Windows 7 Ultimate with my Acer Aspire 4720Z but recently it does not HSPA or any other signal, unless I have to uninstall and reinstall all the time before using it. When I do this, it installs the following drivers:

  Composite USB device
  ZTE Diagnostics Port (COM6)
  ZTE to Port (COM7)
  ZTE ATExt2 Port (COM5)
  With a Modem ZTE USB owner
  Network adapter Broadband Mobile ZTE
  USB Mass storage Device
  ZTE MMC storage device

  But he informs me that "ZTE WCDMA Technologies MSM" cannot be installed.

  This missing driver would be the reason why I am facing this problem. If Yes, where can I get this coz I looked everywhere including the website of the manufacturers without result.

  Hello

  Certainly, this looks like a problem with the drivers. The manufacturer has a way you can get in contact with them at all? It is the responsibility of the manufacturer to write drivers for the devices that are compatible with Windows.
  Another thing to do is to make sure to have all your drivers chipset update of the website of the manufacturer of the computer.
  You say that you have an Acer, so go here: http://support.acer.com/us/en/default.aspx
  You can find model specific computer and download all the drivers updated in need of your system.

• Problem with ZTE MF190 Dongle ("USB mass storage) with the group policy restricted USB storage.

  Please

  I have windows 7, Member of the domain, we created the policy in the domain controller to restrict any USB storage device and it works well.

  My problem is: when I install ZTE MF190 Dongle (USB Modem Stick) first time as administrator it work well, but when restart windows and switch the usb modem, connect as user limited to work, it has not detected (Modem USB Stick) in windows and I found in the "USB mass storage" Device Manager with yellow mark and tied to the usb modem.

  My question is: how except "USB mass storage" which associated (Modem USB Stick) of limited strategy of USB storage for the usb modem work.

  Note: I've updated "USB mass storage" windows with compatible driver (USB composite device), the modem worked, but when restart it windows that the same problem with "USB mass storage" brand yellow and usb modem not detected again in windows.

  Help, please.

  Hi Yahia,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• X 220 expansion slot made port USB 3.0 Express Card 54 mm 3?

  Hey guys,.

  has anyone tried a port USB 3.0 Express Card 54mm 3 in their X 220?

  I found this one on eBay... Card adapter HUB AKE T Mobile 54mm Express USB3.0 3 port 5 Gbps FL1100

  http://www.eBay.com/ITM/ake-laptop-notebook-54mm-express-USB3-0-3-port-5GB-s-hub-T-card-adapter-FL11...

  I noticed a lot of 54mm 2 port USB 3.0 cards on ebay and other portable X 220 Forum users said they use 2 cards of port with no problem and no need to supply cable so I wonder if 3 USB 3.0 port would work?

  See you soon

  Hello

  I imagine that as long that you used a USB 3.0 device that did not need an external power supply (such as a USB flash drive) or had an external power supply (such as a hard disk enclosure) adapater that things would be fine.  You can contact the seller and ask what is the maximum current for each USB 3.0 port, and whether or not the card can provide that simultaneously for all three ports.

  Kind regards

  Aryeh Goretsky

• USB 2.0 PCMCIA Cardbus - CARD 16-bit - map PC Card Type II

  WANTED: USB 2.0 PCMCIA Cardbus - 16-bit CARD - Card PC Card Type II
  karishic@EUnet. Yu

  Hello

  I found this German site with the PCMCIA USB 2.0 card. He compatible 32-bit and 16-bit of s.
  Please visit this link:
  http://www.ergonomics.at/default.asp?ItemNr=DC+USB2%2DPCMCIA

  Best regards

  Good bye

• Satellite 1000 - can I switch to USB 2.0 Via card or do I have to throw it

  Just got a Satellite S1000 and the need to upgrade to USB 2.0 for wireless connection
  Is there a specific map on the market that I could buy to use USB 2.0 or wasting my time
  If there is a card, how I attach to laptop
  Thanks in advance

  Theoretically, it should be possible to connect a USB 2.0 PCMCIA card to the laptop.
  I found in the Google devices. But I have never tested these cards
  These cards are not very expensive. I found one for 40-50 euros