T400 screen dim on startup

Similar Questions

• Qosmio G20 - screen dim on one half

  When I turn the brightness down on my screen on the left side of the screen fades more than the rest. Its really noticeable. One side of the white screen is white, but on the other hand, looks like a dim gray.

  Is this normal when brightness is rejected in full, because when the brightness is enough it seems level across the screen. Or is it a sign that the screen is endangered?

  I only have the g20 since average Feb.

  Hello

  I agree with Ben. It is not normal that half of the screen has less contrast or even more. In my opinion contact you your local or authorized dealer same service partner. You can find the address on http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Satalite 1110: Screen dimming because of the cover button

  I have a portable Satalite 1110.

  It's old but works great but the small switch that is there to detect the lid being closed cheek upward...

  It the screen keeps going dim (almost extinct) trying to save energy when the lid is closed... but of course the cover is not closed!

  If I press the button several times, the screen turns on but it's very tedious...

  How can I say Blons button... the machine?

  Rick

  I'm afraid that you can't say anything but may cut the cable and disconnect this button but please do not ask me how.

  Otherwise you can try to disable using the Toshiba power management utility. Check if the option when I close the lid has option no action.

  Sorry, but I don't see another solution.

• Yoga 2 - 1050 screen Dim/book icon w / stars arises just before

  New show with my Yoga 2-1050. No idea if this is a bug or a setting I find more hours of trying. Only since yesterday, the screen greyed out in two steps and white have something of a brownish hue now. No idea where it would not be in the settings, but I spent a few hours trying to find it and can't. My stuff Adaptive everything stops. Just before the screen fades, a little icon of a book with stars jumps to the top of the bottom, then the screen becomes dim. No option to click on it. I checked my document readers and none of them have an option for this. Only applications that disables what are the camera and Gallery, but at the point where I support out of them, the icon comes back, screen fades. What is the story here? It's now my second yoga 2, due to a bad screen on the first and the bugginess and poor documentation is pretty boring. Every day something new appears. PIC of the icon. I am in broad daylight now and the screen is sort of the night mode. http://I14.Photobucket.com/albums/A326/sknightx1/20151017_081755_zpsn0sjunr5.jpg

  The little book you make refers to is the smart switch to Lenovo. It is controlled through settings or via the drop down menu on the main screen central. You can ignore it so that you can control brightness levels. When in mode auto, it is a bit erratic, but I find it seems to respond more to the position of the stand that the rotation of the screen. I hope this helps.

• T400 screen flashes when power is connected or disconnected

  Hi guys!

  I recently bought a T400. For the moment, it runs on Windows XP, Service Pack 3.

  After the installation of Windows XP, I installed all the drivers concerned and no yellow question mark appear in Device Manager Panel. However, during the process of installing these drivers, now whenever I plug into our remove the AC power plug, the screen turns off for about a second and then comes back.

  This problem was there immediately after the installation of Windows XP and Service Pack 3, that is before installing the drivers. I think it's a particular driver that may have caused this.

  Could someone help me with this? I tried to reinstall the graphics driver.

  Your video card moves the refresh rate when you change the energy sources.

  See your power manager and video card settings - I bet you on battery, you are ready for 50 Hz and AC, you're ready for 60 Hz.

• The T400 screen brightness

  My T400 runs a lot, but I find that I have the brightness of the display mounted as high as possible. Is there another setting of brightness of the screen not to mention that the fn + illuminated keys?
  Maybe in tge to save energy? Or in the system?

  Make sure under the power Option in the control panel under your setting it is complete birgfhtness of power. I used to have this problem worse scenario is to backup and install fees which if done correctly should only take a few hours (like 5

• T400 screen "blinking" every 5 seconds

  Hello. I have a T400 running Windows 7. Last week, I had a problem with the screen flashes (like an eye by opening and closing) every 5 seconds or so - it starts after I have he awakened from his sleep. I had installed new updates, so I went back to a prior restore point was going on. It seemed OK. Then I reinstalled a few updates, and now he's back. It seems to be related to the refresh rate. It flashes when the refresh rate is at 60. If I change it to 50, the flashing disappears.

  Updates should display Lenovo driver - could that have caused this?

  Any ideas would be welcome.

  
  

• HP 250 G4: Keep screen dimming?

  Hello, I have a laptop HP 250 G4, and my screen keeps dimming depending on which Web page, I'm on?

  I tried to update the drivers, no luck. I made sure that the Adaptive brightness has been disabled too, but it always does.

  Any ideas? Thank you

  Hey @jaydog69,

  I understand that you have some problems with gradation on your laptop. I can help you with that, but I'll need to know the model number of your laptop first and foremost. You have directions on how to find the model number in this link. Once I know that I will be better able to help you.

• command prompt screen appears at startup

  Hello

  on startup, I get a screen with the message C:\DOCUME~1\user\STARTM~1\programs\startup\lost.exe command prompt

  CPU NTVDM encountered an invalid statement CS:11e8ID.06ez op: 636 c 617373
  (16-bit MS-DOS Subsystem) choose close to terminate the application
  Yahneev

  Whatever lost.exe is, he has a problem.  Or the other

  • Reinstall (if you know what it is and what to keep),
  • uninstall it (in Panel of > Add/Remove Programs), or - at least -
  • Remove lost.exe from C:\DOCUME~1\user\STARTM~1\programs\startup\

  To remove:
  copy and paste or type

  C:\DOCUME~1\user\STARTM~1\programs\

  in the start > run box, and then click OK.  The folder opens in Windows Explorer. You can then select and remove lost.exe (if you have not unchecked "Hide extensions of known file types' in tools > menu folder Options, you won't see that lost (without the .exe)).

  FYI, the "long file name" different folders in this path are

  C:\Documents and Settings\Utilisateur\Menu Menu\Programs\Startup

  If use you it in the start menu > run box, surround it with double quotes ("")

• Screen dimming / brightening strangely

  When I work on my laptop, the screen sometimes starts dimming or brightening be without my interception. In addition, sometimes in battery mode, the screen does not decrease; the screen is just bright.

  How does this happen and how can it be solved?

  HP Pavilion g7-2301ED, Windows 8

  The only thing I can think is you might have a similar virus on your computer that I had. I managed to remove it. The main symptom is that all of your browsers home page is dosearches.com.

  If not, perhaps you should wait like I did. It took about a week to resolve itself. As if by magic.

• Laptop battery and screen Dim

  Laptop is Vista Dell Inspiron 1420. My adapter/load came out. I always plugged in b/c my screen was so hard to see dim. When it is plugged in, the light was bright. Got new adapter/charger and in a clogged filter still dim and the battery icon does not load. It says "42%" and your current plan may reduce the battery life. What does that mean? What should I do on the issue of the brightness?

  For the issue of the brightness, there should be two key that looks like a Sun. Press FN + brighten or dim your screen. For your power options, go to control panel and select Power Options and see what choices are available to you.

  I hope this helps.

• Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

  When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

  I also have this error report for blue screen event.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057

  More information about the problem:
  BCCode: 1
  BCP1: 85212696
  BCP2: 00000000
  BCP3: 0000FFFE
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini020712-01.dmp
  C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
  C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

  Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  =============================================================

  BCCode: 01 0x00000001

  The most common cause of this Bug_Check is drivers then use the methods in the next message
  updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
  with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
  still in force. (See how to update the drivers and run driver verifier in the next message).

  --------------------------------------------------------------------------------------------------------------

  Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

  LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  LeAPC_INDEX_MISMATCHErreur settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The address of the system (system call) function or a worker routine.
  2	The value of the field ApcStateIndex of the current thread.
  3	The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)
  4	Type (system call 0-, 1 - routine worker) of the call.

  Cause

  The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

  BCCode: 01 0x00000001<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

  ====================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Vista loading screen hangs at startup

  I have a laptop Everex XT5000T with Windows Vista Home Premium (AMD Turion64, nVidia GeForce 7600 Go, 2 GB of RAM, etc.).  Most recently, without any hardware or software changes which I think (I installed MapleStory on... but I don't think that's the problem), the computer began to fade on me randomly and without warning.  If I'm back on the computer immediately after he stops, nothing will move, so I have to wait a few seconds before turning on again.  I run AVG virus analysis every day and to update the database of virus on a daily basis.  At first I thought it was a problem with the video drivers as it seemed then that if I was watching videos, so I installed the "optional" NVIDIA Windows updates.  No change.

  Then this last time when the computer turns off during the night, I turned it back and he went to the screen "you want to start in safe mode" and I said to start normally as I usually do when this happens.  He went to the loading window screen about 2 or 3 seconds, froze, then flashed a BSOD before restarting the computer and taking me to a screen asking if I want to start the recovery of windows or start normally.  The first option does not work, the screen reloads only if I choose it.  The second option just goes through the whole process again.

  The laptop came with a recovery disk, but it removes the entire partition and reinstall the original software that and I really want to have to go through it because I have important files on this drive, I want to avoid that headache, if I can.  Any help would be greatly appreciated!

  Hi Adamsw216,

  If you can find a copy of the details of Vista to startup repair or system restore, then a clean install using your recovery disc is the best chance, you have to be able to use your computer again.

  NOTE:

  Formatting the hard drive will erase all data, programs and user settings you have on the computer. If there is no information on this computer and you don't want to lose, or is not guaranteed, you will need to make backups before proceeding with the INSTALLATION of FORMAT / CLEAN.

  Let us know if you have any other questions,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen during the startup or shutdown

  I have windows vista home premium.sometimes during startup or during shutdown, a blue screen appears for a very short time and the restarts.from of the computer, what I have seen during this short period his written dumping physical memory, etc as something is written on my BIOS.do I need to update my BIOS version or is there any other problem? Please answer soon.thanks.

  You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• black screen after windows startup

  Hello

  I have hp g62 after windows startup, I got a black screen then I restart the pc in safe mode and then disable the graphics card can always turn off restarting the pc, it works but the graphics card
  Please help me for this problem.

  Hi ridha_bargaoui,

  Would you try to install the driver from the HP site and not the BOF the ATI Mobility site.

  Here is the link to the drivers PC laptop G62-b18SA, for the recommended drivers for your system.

  When I look at the spécifciations for your system, if shows that you have an Intel graphics card. HP G62-b18SA Notebook PC product specifications

  Once the page is displayed. Click on graphics and download and install the driver Intel.

  Failure then I suggest you do a recovery to factory.   Performing a recovery of system HP (Windows 7)

  You will receive a prompt during this process, to back up your personal files to avoid data loss. If you did not recently, I suggest you only do one now.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  I hope this helps.