T431s - connecting devices Firewire (1394)

Similar Questions

• FireWire 1394 camera problem

  Community salvation OR,.

  I want to use my guppy (FireWire 1394 connection) of Allied vision camera, but I came across a connection problem. I use this card FireWire (http://www.belkin.com/IWCatProductPage.process?Product_Id=428618), but according to the installation, check, this card is properly installed.

  When I plugged the camera Vision Builder AI 2010 and it wouldn't recognize my camera so I went for the problem that I found at my material properties. When I go to the properties of the camera, he said: "this device does not start. (Code 10).

  I've been looking for a solution, but I'm not a genius when it comes to this. So is there maybe someone who can help me with this problem.

  Concerning

  Ruts

  Here's an update after a whole day looking for a solution.

  I currently see the my card PCI IEEE 1394 (old map 2001) who has a complaint OHCI driver (I guess that's the default windows driver). I also see the camera under my hardware, but it shows with a small sign of error that says "device will not start (Code 10)". I also installed the driver NOR can I see in my MAX of NOR, but non-material to my PCI IEEE 1394 card.

  I also discovered that when I had a unibrain driver installed (in collaboration with the complaint OHCI driver) my camera simply don't appear in my hardware.

  That maybe I need to connect the driver OR with my IEEE 1394 card (I tried to do, but I could not)?

  In the attachments you will find a photo that shows my material.

  EDIT:

  Don't bother the problem is resolved. I think she had need of some time after uninstalling the driver unibrain to see the cam OR max. For those who have the same problem: just install the default windows driver (OHCI complaint) and install the NOR-IMAQ for IEEE 1394 driver (think my problem was the additional Unibrain driver).

  Concerning

  Ruts

• Y at - it a command to force a MacBook Pro to search for connected devices?

  My MacBook Pro (retina, mid-2012 running 10.11.6) struggled to connect to my Drobo Mini - from the first day of the purchase of the Drobo Mini in February. Sometimes it connects, sometimes not. I worked with the support of Drobo, who went so far as to send me a replacement, but still no luck. I learned that I can usually get a successful connection carefully timing my login at a specific time in the 'dancing lights' Drobo starting routine. A little late or a bit early at the moment and there is no editing of the car. In this case, I have no choice but to stop the computer and the Drobo and try again - sometimes repeat this procedure 2 or 3. Frustrating and not good for the material, I'm sure.

  Here's my question (for all the times I miss the right timing), is there a command I can give the MacBook to 'force' to 'search' connected devices? If so, I hope that they can connect. It's frustrating when the devices are connected physically but doesn't seems to "reach out" to the other.

  At startup, the reader sends a signal to the adage of "I'm here, let's connect." computer Or, the computer continually detects when a device connects. Whatever it is, a device or another is dropping the ball.

  Thank you for your help and advice.

  Bill

  Disk Utility.app > file select your drive > Mount

• None of my USB connected devices appear in iTunes (12.4.0.119) on a MBP. Someone else?

  I just wanted to save both my iPhone and my iPod Touch to my Macbook Pro. When I plug them in do they not appear anywhere (but they charge through the USB cable). If I go into file > devices, all the options are greyed out. I experimented with different USB cables as well. It looks like all my devices are up-to-date. Any suggestions? I was able to do this in the past without problem.

  Hi Friskies,

  My 2009 Mac Mini started feeling the same exact behavior.

  I tried all the usual, including diagnostics

  -swap the USB / lightning cable

  -try the new cable into another USB port

  -J' tried 3 different - now 4 different iPad / iPhone devices, all currently running IOS 9.3.2 (iPhone 5, iPad Mini, iPhone 5 s), 7.1.2 IOS (iPhone 4), latest version as of today.

  -The Mac running OS x 10.11.5 - latest version as of today

  -J' deleted the contents of the/var/db/lockdown folder

  -J' I have reset the privacy settings and place on each device (settings-> general-> reset-> reset card and privacy)

  -J' rebooted IOS devices

  -J' killed all other processes running on the MAC including Chrome - about to restart

  -Applications Photos always starts and wants to synchronize new photos from any connected device

  -Whenever I connect a device iTunes recognizes the device and asks me to trust to the device and the device, I get a pop-up asking me to trust the computer, but I can't select the device in the iTunes window.  QED iTunes does not recognize any IOS device connected to the Mac.

  -My next plan of action is a reboot, then download a new copy of iTunes from apple.com/downloads, delete iTunes and re - install.

  Murphy's law strikes.

  As I'm typing this post, I've killed the iTunes process and reconnected my iPhone 5.  iTunes starts, I get messages of confidence which I accept, and lo & here's the iPhone 4 starts synchronization. I can see now each device connected to the Mac.

  So, in summary, the post is a list of my actions and all the tips that I cleaned of all about Internet forums when I google the topic.

  Hope you this help and anyone else who has a similar problem.

  Douglas

• (Not ready) TosBtMng.exe during closing. Bluetooth cannot connect devices

  I noticed that my bluetooth stopped working recently. I can't connect or find near devices.
  I can not open bluetooth settings or any application bluetooth came with my laptop. I have a bluetooth module and everything built in.
  It was then that I noticed that whenever I tried to stop my laptop, one 'not answer' or 'not ready' message kept popping up to TosBtMng.exe.

  I tried to uninstall my previous bluetooth batteries and reinstalled the latest, but the same problem keeps occurring.
  TosBtMng.exe installation rail smoothly however, continues to be unresponsive.

  In Device Manager I see:

  + Bluetooth
  -Bluetooth RFBUS
  -Bluetooth RFCOMM
  -BluetoothRFHID
  -Bt-183 Bluetooth 2.0

  + Ports (COM & LPT)
  -BTPort (COM10 - COM14)
  -BTPort (COM20 - COM21)
  -BTPort (COM6)
  -BTPort (COM65)

  I understand that there should be something under system and USB devices, but I don't see anything else.

  I used ([http://support.microsoft.com/kb/315539/EN-US/ | http://support.microsoft.com/kb/315539/EN-US/]) this link to view non-connected devices and I see a whole bunch of phantom ports. I do not know how to connect these ports. I tried Bluetooth Com Local, but who does not work either.

  I read several posts on this forum about it, but I've not seen a solution. Maybe I missed something? If anyone knows of one, could you please direct me to this solution? Thank you!

  At first, I have to say that it will be interesting to know what Toshiba laptop you have and what operating system you are using. I assume you are using Windows XP Home edition. am I right about that?

  I use BT on my WXP preinstalled Satellite M70 nearly two years now and everything is working fine. If you can't get this to work using BT more recent battery maybe you need to reinstall your laptop using recovery media delivered.

• I can determine the amount of traffic to/from my Internet connection through my Airport due to each connected device (both wireless and Ethernet)?

  My traffic internet, as reported by my ISP, has increased significantly in the past few months and I would like to determine where this increase. Devices that potentially connect via my Airport are:

  Wireless:-2 iPad, 2 iPhones, iPods, MacBook Pro

  Ethernet:-desktop HP, Swann CCTV security system.

  Unfortunately, airport routers provide no information on the use of the data of the connected devices, or the product itself.

  I'm not aware of a 3rd party application that would do exactly what you want... but someone else may know, and if all goes well they after.

• How can I have my network monitoring airport to see all connected devices?

  I would like to change the preferences of my Fritz! 1750th Repeater. I'll pass the LEDs of the question, but I can't access the device as http://fritz.repeater.

  Thank you for helping me!

  Sorry, we can not help you on a Fritz! Question of Repeater, but if you want an answer to your question of... How can I have my network monitoring airport to see all connected devices? ........

  On your MacBook Pro...

  Open Finder > Applications > utilities > AirPort Utility

  Hold down the option key on your Mac when you double-click on the image of your AirPort Base Station (we assume that you do not have an AirPort Base Station)

  A summary sheet opens to show all Wireless Clients that are currently connected to your network.

• How can I connect a firewire camcorder to my Mac Pro mid-2010?

  I have a good Sony TRV900 camcorder which connects via Firewire, so how do I connect it to my Mac Pro mid-2010, which has no firewire connection? (I need to be able to transfer data from the Ribbon mini-DV camcorders for editing in Final Cut Pro)

  https://support.Apple.com/kb/SP589

  "Four ports FireWire 800 (two on the front and two on the rear panel).

  http://www.sonnettech.com/product/fw_adapter.html

• Discover connected devices?

  Hello

  I use a little code to detect DAQmx devices.
  It is useful to make a program for any user of Labview
  It works fine, but the code doesn't discover the GPIB-U. S. - HS +, then the connected device.

  Anywone can help me.

  Use VISA find resources to find instruments in your system. DAQmx concludes that the DAQ cards.

• Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

  I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
  I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.

  I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

  I did all the options like:
  1 uninstall and reinstall modem drivers
  2. release the COM port and the new port assigng

  We always get but same error. Any solution for this problem would make.

  Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

  System Restore frequently asked questions.

• Firefox IOS contains 6 connected devices when none are connected

  When you try to synchronize Firefox in IOS I get 'Not Sync not available'. When I press the "Clock", under "Synchronized devices" icon it said "6 device (s)".

  I only have my laptop and Ipad which I am trying to sync?

  Why Firefox IOS think I have 6 devices?

  Update 1: I uninstalled Firefox on my Ipad, then reinstalled, retried Sync failed and now it says 7 devices? Update 2: this is getting ridiculous - I synced my Ipad via Itunes and Firefox on my Ipad now reflects my laptop. This is despite IOS Firefox still saying "Sync is not available.

  Update 3: without making any change, Firefox on my laptop now syncs with my Ipad and the number of connected devices has been delayed to 1 on Firefox IOS.

  When I request a Sync on Firefox IOS is still says 'Sync is unavailable' but the synchronisation actually takes place.
  

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• What is a secure way to connect devices through the internet by using the credentials of the AD?

  I want everyone to connect devices using their company user names that are stored in Active Directory. RADIUS does not help because the credentials are not sent encrypted. What are some options for encryption of the credentials you travel a router to AD?

  RADIUS crypt passwords.

  GANYMEDE + encrypts the credentials, and then some.

  Reference.

• BlackBerry Smartphones Application Loader said... way has no software of BB device for the connected device.

  Mine is a new 8320.  I installed the Desktop with Media Manager software.  Seems the 8320 on the CD Office and the online version does not include Media Manager so I installed v 4.2 Service Pack 2, which includes the Media Manager.

  Now cannot transfer music files (I get a memory error output) and when I go to the application manager to check the memory, he can't read my 8320 and I see the message "doesn't have a device for the connected device software."

  How can I add 8320 sotware for the Application Loader device so that it can read my memory allocations 8320, etc.?  What else could be the reason I can't transfer music files?

  First of all, without a press card is impossible to move higher to 2.86 MB files to the device.  If you get a media card you can load any file size to him and you don't even need Media Manager.

  Secondly, you will need to install the software on your PC so that DM will recognize it on the device.  You can get the software from your carrier download site.  Here is a link that should help you:

  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

• Computer does not recognize Galaxy S3 as a connected device

  My computer (Windows 7 platform) previously wouldn't recognize my Samsung Galaxy S3 as a connection device, but can do no more.  Everything was great until I connected the phone ATT my wife via the USB port to load upwards.  My phone still load via USB but is not recognised as a device more (via Windows Media or by the control panel of the computer).  I tried to use a fix for windows application, but it does not help.  Please help me.  Thank you.

  In my view, that this unit has a removable sd card that will act as a removable disk, so you can access the files.