T61 does not recognize carpets * a Multidrive UJ-862

Similar Questions

• Carpet * a DVD-RAM UJ - 841S does not recognize movie DVD on Satellite Pro A100

  I have a portable Satellite Pro A100-PSAAPE.

  Initially the played DVD movies very well, but now it does not recognize DVD movie at all.

  The drive itself is recognized and works very well with recovery DVD and CD-ROM.

  Phone support: they had me reinstall the driver and boot from the recovery DVD. This does not solve the problem. They then said to do a system restore. Tried, but it seems that the previous restorations of system are in themselves unsuccessful and the restoration of the system that has worked has not solved the problem.

  MediaPlayer and Intervideo WinDVD seem to work well, but do not find the DVD in the drive.

  They advise now reinstall me to factory setting, but don't want to build the laptop up to scratch etc, so I'm hoping that there may always be a solution.

  Can anyone help please?

  Thank you

  Best wishes

  idob

  Hello

  You understand that you must specify if it is a hardware or software problem.
  Unfortunately, you can find this secret only using recovery DVD (CD).
  Toshiba recovery installation will define the laptop back to the factory settings. In this case you may find whether or not the CD/DVD device is defective.

  If the player will not play the DVD after the reinstallation of the operating system, then chances are that it is a CD/DVD drive error.

  Good bye

• Satellite M60-155: drive does not recognize DVD

  The multidrive on my laptop does not recognize DVD-he just turns and clicks.

  It recognizes the CD tho. I've had this problem before, but did not pick up the CD player and it plays DVDs.
  I managed to solve this last time, but I do not remember how.

  Any ideas?

  Hello

  Don't you remember how you solved the problem? ?:|
  Hmm, very strange.
  However, I think that it s a problem of calibration of lens of the drive.
  The lens can not be calibrated properly and that's why the drive cannot read the media.

  Have you tried to remove the drive from the laptop? If this is not the case, try to remove it. Then start without the drive. Then shut off the unit. Reinstall the drive and start the laptop. The firmware should take over again and maybe the lens is calibrated in the right position.

  You can also try to clean the lens gently. But if the whole points will not help you may need to replace the drive

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• 12.5.1 iTunes does not recognize the connected device

  iTunes was working fine yesterday, the computer recognizes the device and managed to make a back-up. Put current iTunes 12.5.1 and now iTunes does not recognize that a device is connected. The computer recognizes that a device is connected, it is a device of trust but not iTunes. Even in the file menu, devices is not available. All the USB drivers are up to date and used 3 different usb cords.

  Current iphone OS 10.0.2

  Windows 10

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• PC does not recognize my iphone more than 6 s

  iTunes is not pop up when I plug my iphone 6 s more pc and when I open iTunes me it does not recognize my phone.  I want to take my phone pictures is off and put it on pc and delete automatic telephone.  Help

  Try the iOS device is not showing in iTunes for Windows.

  TT2

• FCPX does not recognize camera

  Hi guys. FCPX does not recognize my Panasonic AG HPX250P p2 camera. Any suggestions on how to fix this?

  Thank you

  I'm not familiar with the specific camera, but if you record on a SD card, you can try just plug the camera card and import your videos from the card (or make an archive) instead.

  If you save on tape, then you need to connect the camera using Firewire, NO of USB. For a recent mac, this requires a bolt of lightning to Firewire adapter.

• iTunes does not recognize my phone

  iTunes does not recognize my phone

  See the troubleshooting steps in this document support. If iTunes does not your iPad, iPhone or iPod - Apple Support

• Photo of ios10 does not recognize a face in a photo.

  Photo of ios10 does not recognize a face in a photo.

  How to attribute it to the person.

  You need the User Guide, as it sounds like the info. For more information, please download the Guide of the user, with only an iPad 4 I am unable to help much more.

  "Add others. Tap Albums, people, press Add people, select people to add, then press Add.

  Merge people. If the people album shows a person identified as two people or more, press Select, click each instance of the person, and then select Merge.

  Remove the incorrectly identified people. Press a person in the photo album, and then view all to display all the photos they appear in. Press Select, press on show's face, touch the face misidentified, tap, and then tap not this person.

  See the photos that contain a person. Tap Albums, people, then select the person. »

  From: Apple Inc. "iPad for iOS 10 user's Guide." Apple Inc., 2016. iBooks.

  These documents can be protected by copyright.

  Find this book on the iBook Store: https://itun.es/us/Cf0Odb.l

• iTunes does not recognize my iPhone 6

  I updated iTunes and my iPhone to the latest updates (iOS 10 and all that is the iTunes one) and iTunes does not recognize my phone, but my computer recognize (I have a HP envy with Windows 10). I tried everything that looks like finding the Universal Serial Bus thing and turn off my limitations and download and redownloading iTunes. I did the thing were I updated my driver on the computer and nothing has worked. I don't understand why it does not work. I can't even synchronize with iTunes via Wifi, it just does not appear. Someone please just help me please

  Hi BrittLeighCass,

  I understand that you are not able to get iTunes to recognize your iPhone, now that you have updated your iPhone to iOS 10. That you have described here some quite impressive troubleshooting in-depth. Fortunately, however, it may well be a few additional things to try in this situation.

  First of all, let's make sure that iTunes is completely up to date: iTunes - download iTunes

  If the update to iTunes is not your iPhone appears, see if there are all the steps described in the article below that you do not have covered still.

  If iTunes does not recognize your iPhone, iPad, or iPod
  https://support.Apple.com/en-us/HT204095

  See you soon

• ITunes does not recognize the device

  My I tunes does not recognize my I pad or I phone. There's no problem on another computer. I tried to remove Itunes and reinstall, but no avail. Computer is windows 10

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Why my audio midi Setup does not recognize my external midi devices?

  Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.

  P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?