T61 sound does not work after reinstalling

Similar Questions

• ProBook 4530 s sound does not work after reinstalling sound driver

  Hello

  Lately I noticed this weird sound while I was playing music or other sounds from my computer. It is difficult to explain what it sounds like but it was as if the distorted sound for one second every now and then, a little sound like a robot. I looked if I could solve this problem and found that reinstalling the audio driver should solve the problem. That's what I did, but after reinstalling and restarted my laptop it says "Nou Audio output device is installed" I made clear on the site of hp. For the moment, I have no sound. I tried to install an earlier version of the audio driver, but that no longer works. I'm sure that I have installed the correct drivers (I tried sp59291 and the sp57776 of earlier version).

  I don't know what version I have installed first.

  Additional information:

  -To install a new audio driver, I went to the Device Manager and uninstalled the current sound driver.

  -Manager At of devices under the IDT High Definition Audio CODEC there is a line called "Intel(r) Audio display.

  -In the Device Manager there is a yellow triangle with an exclamation to IDT High Definition Audio CODEC

  -J' have Windows 7 Home Premium 64 - bit installed, service pack 1

  I hope you can help me!

  Myxx

  Guess I have solved the problem, I uninstalled the audio driver, close my laptop computer and rebooted. It starts automatically install the correct driver. I hear that weird no sounds either!

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Sound does not work after installing new wireless keyboard and mouse

  I have windows xp Media Center installed the new logitech wireless keyboard and mouse, and now my sound does not work. The speaker light is on, the Device Manager does not show a conflict and said that everything works well, but still no sound. A friend has just installed a new microsoft wireless keyboard and mouse and is having the same problem so I know that's not new equipment. Does anyone else have this problem?

  Hi Red_t,

  Welcome to Microsoft Vista answers Forum!

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP Media Center and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.

  Windows XP Media Center edition Discussions - http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windows.mediacenter&lang=en&cr=US

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• sound does not work after you reinstall

  Original title: I had to reinstall xp on my computer after doing so, I can not speaker working

  can anyone help, I can't get my speaker to work after reinstalling Windows xp, because they don't have any softwear with them

  Perhaps, you resorted to reinstall windows because your computer has become unstable because of a faulty hardware, such as a system driver or faulty hardware under sound.

  in all cases, you should try to re - install all software and hardware drivers on your computer directly from its place of origin.

  In addition, it is unclear if you do or you don't have a card its pci added to your motherboard at the moment.   But if you do, then you will need to re - install the software and drivers of its place of origin.

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• Satellite A200 - 1 M 7: the sound does not work after the downgrade to XP

  Hello!

  As in the topic I have a problem with my sound card - it simply does not work under Win Xp (under Vista everything worked).

  In Device Manager I have two 'points of inquiry:
  -Controller\ PCI memory
  -Unknown device
  I assumed that the unknown device is my sound card, but still can't make it work :/

  I've already upgraded the bios and install page of toshiba Realtek drivers.

  Really need help.

  Adrian

  Hello

  No sound after installing XP operating system. What to say man I searched here in the forum similar threads and it seems that it is a common problem.

  But you worry about don t; I think that I found the key ;)
  After installing win XP, you must update the latter State. Install all the patches and hotfixes provided by Microsoft. You must use the website to update Ms. The tool on this page checks the system and selects all necessary updates!

  Very important are the patches; KB888111 and KB835221
  These hotfixes must be installed before installing the sound card driver.

  The Realtek sound card driver can be downloaded from Toshiba or on the official website of Relatek page.

  By the way; It is very important to install drivers in the correct order. On the Toshiba page, you will find the installation instructions. So please follow the guidelines mentioned in this doc.

  concerning

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Fusion does not work after reinstalling bootcamp

  The previous installer: install Bootcamp with XP and using Fusion for xp from os x.

  I improved my internal hard drive and used superduper to copy on my existing mac partition.  However, my xp partition has not transferred because superduper does not recognize this.  I ended up reinstalling windows from scratch via bootcamp.

  I can boot windows very well.  The problem is that the merger will not start my windows partition.  I get this error message:

  «You have your IDE (disks/CD-ROM) devices configured in a State that won't work - you have an IDE slave with no master to ide0:1.»

  While this works on some BIOS and some actual machines, it doesn't does not correctly on a virtual machine. "Please place your disk/CD-ROM in ide0:0 to ide0: 1 in the configuration editor.

  I have run the uninstaller for the merger and then reinstalled but it does not work.  (It also remind my series, so I do not know it is how 'uninstalled').

  Is there a way to reset the merger?  I'm on 2.0.1.

  Thanks for any help!

  When the Fusion is not running, remove your machine virtual Boot Camp (and the virtual machine to help naos) of /Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines /-since you changed the partition, it will not work in all cases. The next time that you run the Fusion, the virtual machine Boot Camp must be re-created.

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• WiFi does not work after reinstalling the system

  I have Pavilion dv6t - 6 c 00. I had to reinstall Windows 7 due to a virus. After installing all the drivers available from hp.com for my model, everything finally works but Wifi still does not (network controller shows lack driver even after I tried like 8 different). Here are the technical details:

  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  Appreciate any help. Thank you!

  Hello:

  Download and install this driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• USB does not work after reinstalling Win XP Pro on P10 - 504

  Hi all

  I have problems with my computer laptop satellite P10 504 series, I recently had to reinstall windows xp professional on my laptop, and since I had no usb recognision.

  all devices (disks to flash memory, wireless usb devices) all show the power on the power light, but windows does not detect the new hardware, I reinstalled now twice thinking it was a faulty installation but not luck...

  OS: XP Professional SP2

  I have no recovery / tools and utilities cd since they disappeared, downloaded all the drivers from the toshiba website, even tried using the latest chipset drivers intel on the NET, but none seems not to work...

  Help, please

  any help is always appreciated

  Thanks in advance
  Rob

  Hello

  I think only 2 possibilities:
  1. the USB driver is missing on the download page. Then, you should contact Toshiba service.
  2. I found a Quick Fix Engineering Q822603 for USB drivers. Maybe by installing this will help.

  I'm sorry that I don't have a better idea.

  Good bye

• Sound does not work after the computer Windows XP formatting.

  Hello

  I am the customer service representative who is to ask your question on behalf of the client. After reformatting his computer Windows XP and installed all the drivers, its only driver no longer works. It has an Assembly of Dell 3000 Windows XP Professional. The device that is not working is a Soundmax audio controller that has yellow mark in the Device Manager. It ran Windows update troubleshooted it and restarted the machine and the problem persists.

  Perhaps the sound card must be replaced.