T770 44 "HD: the screen of the printer when turned on, remains white

Similar Questions

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• Do the "keys" on each side of the Envy4500 lights when the printer is turned on?

  I just bought two new Envy4500s and at the same time on them, the "key (i.e. up/down, 'ok', etc.) on each side of the display screen does not light up when the printer is turned on."  HP rep said they should, but on any machine they light up. Thus, all "keys" are essentially impossible to see. Any help would be greatly appreciated. Thank you!

  Hello @paularose,

  Thanks for posting in the Forum from HP Support.

  I see that you are curious about the screen of the HP ENVY 4500 e-all-in-one printer.  I would like to help.

  The arrow keys do not light up when the printer is on, but as you can see when you look at your own models, they are clearly identified.

  I hope this helps.

  Kind regards

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• J611 3050 has installed on Vista and works very well. Installed on Windows 7 and said always the printer is turned off.

  My Deskjet 3050 a J611 is installed on Vista and it works fine. I then installed on a Windows 7 and the installation went well. No error message came, but when I try to print nothing happens, it just sits in the queue. When I run the diagnostic windows to solve the problem it says the printer is turned off. But it's not far, I can print the Vista machine.

  Download and run this utility on the Win 7 machine: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• (Officejet 4500 G510g-m) does not print when turned on

  Device does not print when turned on. I then cancel printing, turn off, restart and it prints. All the diagnostic seftware shows green controls with messages like "printer ready" & "no problems found".

  Hi Donatkisson,

   
  1 have you made changes to your computer recently?
  2. you receive an error message when you try to print?
  3. What is the operating system installed on your computer?
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Follow the steps in the link and check if that helps.
  Printer in Windows problems
  

  Method 2: You can also follow the steps in the link and check if it helps.

  Unable to print? Print jobs are stuck in the print queue
   
   

• Alignment Page HP PSC1315 prints every time the printer is turned on

  It's VERY frustrating.  After installing a printer driver updated to my new Win7 system and installation new black ink cartridge in the printer dang prints the alignment Page, whenever I turn it on!  I have "lined up" it several times and yet HP insists to waste my (money for waste of ink and paper) green, even though I followed the software and the instructions on the page to test several times!  Help!  It is rather ironic, given my brand new printing software (wow that download was enormous: no doubt inflate more software) has a button how to be green at the top right!

  I've been a supporter of long standing of HP that buying the products of your printer for many years, but unless this is resolved soon, I'll go out and spend double what price this printer and return the money to your Kumite.  This is intolerable!  I do not think that your software help consider even this oversight, oh, but I see that I can click on a convenient button HP purchase!  Furthermore, I'm not some neophyte with computers, I built this pc and many others before it.

  signed... Frustrated!

  Hello

  Have you tried that?

  1 turn the printer off and wait ten seconds. Turn it back on.

  2. let the printer print test page.

  3. when the test page prints, unplug the USB cable that connects to the printer to your computer. Not turn off the printer and unplug the cable.

  4. place the test page to the glass of the scanner and press the SCAN button on the printer control panel. The indicator light flashes while the page is being analyzed.

  5 remove the test page when the indicator light stops flashing.

  6. turn the printer off and wait another ten seconds.  Now you can turn it back on it.

  It is no longer printing test pages?

  Now, you can reconnect the USB between PC and the printer cable.

  Please post your results.

  Kind regards
  ERICO

• can't choose the printer when you print the HTML report

  Hello

  I lost many many hours trying to correctly print a report that consists only of a JPEG image.

  After a conversation in the forum, I have concluded that the LabVIEW includes a printing Standard reports bug, because it cannot handle properly the margins and the scale of the image. But, when using Standard reports, I could choose which printer to use.

  So, I use HTML reports smoothly to print the report, but the choice of the printer has a problem. No matter which printer is chosen by a Menu of the ring, it prints to a printer even all the time.

  Could you please give me a tip for this problem?

  I enclose the corresponding code:

  

  
  

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• OfficeJet Pro 8615: Computer thinks that the printer is turned off

  My computer does not see the printer as being on.  I have the printer connected wireless, but the computer shows it as offline.  When I run the troubleshooter, it tells me to turn on the printer (it's on).  I can scan a document and sends it to the computer but I can not print from the computer to the printer.  I think it's maybe a problem of Windows 10 but I'm not sure.

  Any help would be appreciated.

  I also ran a test network through the printer and everything this past.  Don't know what to do from here.

  I've updated but that does not solve the problem.

  Finish by uninstalling the printer software and reload the drivers.  This seems to have taken care of the issue.  So far so good.

  I think that the combination of the upate and reload the drivers solved.

• Why Windows XP Pro creates another instance of the printer when I connect my USB printer,

  I am running Windows XP Pro SP3. I have a HP LaserJet 1100 printer (parallel) through a parallel to USB adapter. It seems that whenever I connect the printer to my laptop, another instance of the printer is created, so I have HP LaserJet 1100 (MS), HP LaserJet 1100 (MS) (1 copy), HP LaserJet 1100 (MS) (copy 2). Only one of these printers may also appear online at the same time. Sometimes I use the laptop in a dock and connect the printer to one of the 2 station USB ports, and sometimes I connect the printer to one of the 2 USB ports on the laptop.

  How can I consolidate all of these instances in a single printer so that I can have a consistent default printer? Or, how can I prevent this from happening at all?

  Bruce B, Massachusetts

  This happens because you have connected the printer to different USB ports.  The same thing happens when you connect any device (e.g., a mouse) on different USB ports, but unlike "Printers and faxes," Device Manager shows only the devices not present ("ghost") if deliberately do you.

  If having the extra icons printers and faxes you, right-click on it and select "Delete" - and then always connect your printer to the USB port.

• DeskJet 3522 printing scanning copy: hp dj 3522 disconnects wireless network when the printer is turned off

  I have the above printer.  As indicated, it disconnects from the network when it is off.  I have a Westell A90 750014, MAC, disabled filtering router, the printer has been added in the MAC filter table, and in the wireless station status is listed as "associates".  When I reconnect once disconnected from the network, I am able to reconnect using the simple push button config method.  Can someone tell me a way to feel connected to the wireless network.  Thank you very much for your help.

  Hi @scotty1963

  I understand that you have problems with your printers wireless function despite all your efforts. I'm sorry to hear that, but it will certainly do everything I can to help

  Please use the following document to solve the problem and I would like to know the results of your efforts; The printer keeps Wi-Fi connection.

  I hope this helps.

• How to stop the printer to print the page alignment each time that the printer is turned off?

  I have the HP 2480 all in one printer/copier/scanner. Never understood how to scan to my computer, but it's not my problem. Whenever the printer gets cut and then cut on it automatically prints an alignment page. How can I he stop doing that. I'm tired of wasting paper and ink.

  Hello

  The printed sheet is a part of the process of alignment to align the ink cartridges.

  Make sure you complete alignment by following the steps below, otherwise the printer will keep printing the page because the process was not completed.

  http://support.HP.com/us-en/document/c01764745

  Kind regards

  Shlomi