Table of power

Similar Questions

• Table 3646 power supply problem

  Hello

  I can't get power table 3646A to update the voltage continuously with output trigger toggle, I looked at the Vi provided by this site but, the program works as a time control. My goal is to hang the PS with a PID loop at a temperature controlled heating, so I need to vary the tension of a sensor-based and updated updated according to the needs. Is there a way to bypass the output to toggle control or is it a separate labview program that can change settings on the fly rather than the start and stop.

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=A40AB1DAFDB64F6CE0440021287E6A...

  Thank you very much!!

  The reason that he died, it is that you tell it to do.  Look at what your program does: it initializes the power.  Initialization sends a command 82 h with the data value 02. This sets the power to command with the output OFF remotely! Then activate you the output.  Then, you set the voltage to the desired value.  Immediately after, the while loop iterates and the power comes back again.

  1. do not place a while loop to run forever.  Do not use the button abandon in the toolbar to stop your VI.  It's an escape for use during development hatch, where a program does not run correctly.  Put a stop button on your façade and also use stop the loop.

  2. do not use seqeuence structures if not necessary.  Your program will work exactly in the same without it.  LabVIEW uses data streams to determine which part of the program will then run.

  3. you should learn about state machines.  They give you a lot of flexibility to do this kind of things you are trying to do.

  4. until you learned how to use a state machine, move the initialization and activate spuuly screws outside the loop.  They should only run once.  Put configure VI it inside the loop.  Also put a wait function (ms) inside the loop.  The loop doesn't have to try to run hundreds or thousands of times per second.  (A better approach would be to use a structure of the event and send new data to power thepwer when the value of the voltage level is changed).

  5. once the set loop a Power Supply VI activate with defined entry to disable the output, followed by a close VI.  This is similar to the sample program.

  Lynn

• Link to information from tables and display the 'best '.

  Hello! I'm totally new to this great software, and the truth is that I lost D:
   
  I try to explain in more detail what I have to do, I hope you can help me please it is urgent T_T

  I do 3 tables must be related to each other, that is to say a table where a username will be manually enter, another where you manually enter the user name and the third which will automatically enter power of each user (for automatic writing, I'll use random data). Each table will have a box number, for example:
   
  Table 1, box 1: Paul
  Table 2, box 1: door
  Table 3, box 1: 3.74
   
  Table 1, box 2: Miguel
  Table 2, box 2: Ramos
  Table 3, zone 2: 4.99
   
  Table 1, box 3: Maelle
  Table 2, area 3: Branco
  Table 3, case 3: 4.98
   
  I mean, I bind the box to one table with the other three. And because the program must compare the data in table 3 (power) and display the data of the user of best (which has the highest power). In this example, the program should appear:
   
  BEST USER:
  NAME: MIGUEL RAMOS
  POWER: 4.99

  (Is not slender record information when I close the program)

  I don't know if I ask you very much, I have a very clear idea in my head of what I have to do, but being a new software for my not know how to implement it.

  Thank you in advance for your quick response and help and ilustrative! xD

  Have you tried something with the basic understanding of your question check if this is what you need?

  -Still not clear what you mean by table? (In my opinion, the table is 2d array of values here, otherwise please let me know.)

  -C' is the reason why I asked you to show your code you did then it will be clearer.

• Table counts

  Hello people.

  I have a (I think) interesting the problem I am looking for a better solution.

  I have an array of values of temperature designed to make a cold room. :

  Each element of the array has the oven temperature, the duration of the cycle (in minutes) as well as certain other information. The table should power loop on her self so a 'loop' and the 'number of loops' is also include.

  FOR EXAMPLE:

  Part 1 (20, 30 minutes) and then go to

  Part 2 (30 degrees in 30 minutes) can stay in the

  item 3 (30 degrees 30 minutes), loop element 7 2 times and then go to item 4

  item 4 (45 deg for 30 mins) stay during 30 minutes then put an end to the sequence.

  Now Im trying to find the total time of the room temperature will start to time in the table. In the example above indicates the total time would be 480 minutes

  I have included my (rather clumsy) source code (which works, but is not very elegant)

  Can anyone think of a better way?

  Thanks in advance

  Chuck

  You can use this conversion as a Subvi is more elegant.

  This is a kind of conversion, but it works differently from the Counting2.vi. I did not understand how to make the inner loops =)

  The loop after conversion has the time for all operations.

• How to store the results in several digital Test

  My VI returns two double individual (not in a table), output power and frequency

  I am configuring a multiple digital test in TestStand but struggling to store readings.

  Using the following, I get an error.

  Output power of VI: Step.Result.Measurement ["Measurement 0"]. Data

  VI output frequency: Step.Result.Measurement ["Measurement 1"]. Data

  Would appreciate some advice.

  Thank you

  Got, it works

  Results were to be stored in Step.NumericArray [0], Step.NumericArray [1] and not Step.Result.Measurement ["Measurement 0"] as I've had.

  Thank you

• full waveform graph to calculate the area under the curve over time

  Hello

  If please find my attached VI and help me please for integration to get area undercut for my chart of waveform.

  I would like to find my wave power wind energy production chart oever within one month of time.

  I think I have to integrate to get the area under the curve and so I m now using tool integrated into labview attached.

  As I did not wait years for my result and so I want to make sure that the tool that I m using is correct.

  Please advise me what method I will use for my chart.

  Dominique says:

  I would like to integrate my table of power over time (table of power is on each interval of a minute) and the entire graph is one month. So, I'll put dt = 1?

  You put dt at some units you want in the final result. If you want Wh, you want dt in hours. If the spacing is currently a minute, you can express in fractional hours and use the result as dt. Try dt = 1/60.

• Continuous Webcam capture and record to avi later

  Hello

  I'm new to LabVIEW.  If someone could help with the webcam USB and LabVIEW 2010.  I have all the drivers installed IMAQ.

  What I'm trying to do is capture video stream into a buffer or a table and power extract as video buffer and save it as an AVI video.

  If the main issue is buffering video in memory and writing as an avi file in a later time.

  Sorry if this confusion.  Please let me know, I can be more details to clarify the thing.

  Thank you very much for your help.

  Dan

  Hi marlin12,

  To add to the conversation, there is another example in the Finder for example LabVIEW related to the creation of a buffer zone.  It is found in the input and output material > IMAQdx > low level Grab.vi.  I hope this helps!

  Kim

• Install a hard drive

  Original title: Pedro

  Y at - it a problem if I (temporarily) install a hard drive in my PC of capacity equal to one he has (both 1 T). I know that a hard drive with a lower capacity would cause the original HD does not work when the reinstalled (500 MB in an original HD 1 TB).

  Thank you for your advice.

  Pedro

  You can give more details about what you are considering, but--

  "I don't know a hard drive with a lower capacity would cause the original HD does not work when the reinstalled"

  You can install the variable capacity HARD drives and mix the SSD HARD drive. Mixture of capacity should not

  normally cause any HARD disk to stop working.

  -What you need to be careful when you install a HARD drive in the case, is not Exchange not the cable on the

  Windows HARD disk is installed on a different SATA port (what good practice dictates as Port 0)

  If you do not have what you need to rearrange the order in the BIOS Boot section (or change again the cables),

  or the machine can "read" the HARD drive badly and not start Windows (depending on the configuration of the BIOS).

  Examples:

  -J' have a machine with an e-SATA docking station I can pop any HARD drive in.

  I have backup of HDD of 80 GB, 320 GB, 500 GB and 1 TB.

  (This machine has a SSD and 2 TB HDD installed)

  I also use that HDD dock for a 'double' boot Win10 from an another SSD

  (Win7 is installed in the case, then I have to change the BIOS boot option when I change from one OS to the other).

  -My second machine (with an SSD, 500 GB and 1 TB HDD installed) doesn't have the luxury of a

  e SATA dock, so with this one, I use a spare door HARD disc that came with the case and the spare SATA and

  cable to connect temporarily HDD with the stop sign and the HARD disk on the table

  (power off and disconnected so that the implementation).

  This is not a practical method for the weak and not heated, but works well with my old HARD drives.

  For most people, using a HARD "external" drive that comes in its own case with a cable USB or e-SATA

  connection is the best option.

  .

• Change the value of column select and insert different

  Hi all
  
  I've written a procedure where I am selecting values in other tables and inserting into a new table. The code is below
  If you see line 54 in the code, you will find the combined_bu_code is comes from a procedure and the value of BU is stored in prod. Table SEM_BACKLOG_LOG. I need to check, if the combined_bu_code came as PWR then insert as table BACKLOG_OTD_NEW POWER not as PWR.
  
  You are looking for assistance on this. Thanks in advance
  
  Concerning
  
  Published by: User_Apex on June 23, 2011 03:03
  
  Published by: User_Apex on June 23, 2011 03:53

  DECODE(SMTC_OTD_CHART.get_combined_bu_code(a.BU), 'PWR', 'POWER', SMTC_OTD_CHART.get_combined_bu_code(a.BU)) COMBINED_BU_CODE
  

  Kind regards
  Richard

  -----
  blog: http://blog.warp11.nl
  Twitter: @rhjmartens
  If you answer this question, please mark the thread as closed and give points where won...

• Power of function with a very large number & table HEX

  Hello

  I have 3 problems and I would be grateful if anyone can help. I have attached

  (1) I need to calculate 982451653 ^ 15. I used the "Power of X" function but her resut I receive is incorrect.

  

  is there a way to get the correct result?

  (2) after that I need to calculate result, but I get nothing? I use the function «Quotient & reminder»

  (3) I need to convert the number to HEX 982451653--> 3A8F05C5 and send it to table by two gruped back as shown below:

  3A8F05C5--> [3A] [8F] [05] [C5] and write on the Board by behind.

  Table should be:

  

  .. .and for hex 3A8F05C56 number--> [03] [A8] [F0] [5 C] [56]

  Table:

  

  Help, please!

  
  

• power output of the spectrum in table

  Hello

  I have a signal and I need to make the power spectrum. How can we separate the information contained in the output of the power spectrum cluster? I tried to use the unbundle, but it gives me an error: "the type of the source is table 1 d of the cluster of 3 elements. The sink type is cluster of items 0 "if I click on the unbundle it won't let me select anything, it says empty..." Does anyone have an idea how to solve this, please?

  

  Array of generation is not your friend here actually I replace the generation arrary and the screw Express Power Spectum with 'FFT Power Spectrum and PSD.vi' search the palette or use quick drop to locate him.

  Why shoot there since just filtered signal to rebuild the same waveform?  Wire the waveform to the second power of DSP and FFT spectrum .vi directly

• power oid process should be recorded in the ODS. Table ODS_PROCESS

  power oid process should be recorded in the ODS. Table ODS_PROCESS. but I do not see anything... and what are the commands to start/stop OID as do I, do me right if I'm not...
  
  oidmon connect = ldapdcx1 power
  oidctl connect = server ldapdcx1 = config oidldapd = 2 = 3 start/start instance
  
  SQL > select * from ODS. ODS_PROCESS;
  
  no selected line
  
  SQL > exit
  Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.1.0.5.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  [dcxnim01]: [ldapdcx1]: = > ps - ef | grep oidldapd
  Oracle 675894 1200310 0 09:16:40 pts/0 0:00 grep oidldapd
  Oracle 938116 1 0 Jun 22 - 13:50 / oracle/product/oid10g/bin/oidldapd connect = ldapdcx1 Pei 389-i
  3 - conf 2 - sport button 636 - sslenable 2 = 1085443401
  1327250 1 0 22 Jun - 179:12 oidldapd Oracle
  Connect = ldapdcx1 = 938116 = 1 worker dispatcher control = 2 debug = 33554432
  ConfigSet = 2 instance = button 3 = host 1085443401 = dcxnim01 trcdimension = 511 logchange = TRUE port = 389 sport = 636
  [dcxnim01]: [ldapdcx1]: = >

  What version are you using?

  To start the OID, you must use opmnctl command.

  Greetings.

• Write the spectrum of power + other tables to PDM

  Hello world!

  I am building a project of data acquisition, using compactDAQ to measure and record data from an accelerometer.

  The main objective is to save the data of acceleration, speed, displacement and frequency in a PDM spectrum, but I'm having some trouble it.

  As you can see in the attached file I had coveted, data of the wizard Express in a waveform to unbundle + build using waveform, after that I wired this waveform of a generation a table with data ACC, of speed and movement.

  The problem arises with the viewer TDMS data reading because the plot of the frequency band is not the x-axis with the right values, instead display the data of frequency it indicates the date and time that does not correspond with the PC, but the fact is that I need the frequency values.

  Is it possible to change and enter the correct values in the TMDS file?

  Thanks in advance,

  Omar

  The TDMS Viewer included with LabVIEW is not going to meet the needs of each.  And this is a case where it is inadequate.  Your data is stored correctly (at least the image looks right.  Also next time code postal no pictures.  Attach a VI or a code snippet.

  When you read your data PDM Regularisez using a DDHN reading him indicate you the type of data to expect, and there you can provide an analog waveform.  Then when you read back you will have the same dT and T0 he wrote with.  The problem with the Viewer is probably does not know it is a waveform and is simply read data from amplitude and then confuse around the X axis.

  You can write your own code to read the file, make a copy of the existing Viewer, then change it. Or my favorite is try Scout by Signal.X.  They took the standard TDMS Viewer and gave it an overhaul.  You might get lucky and open the data normally here.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/211879

• Table of contents - power of the text box

  Hello

  I recently started using Adobe InDesign and love it! I have a question around the table of contents. At the beginning of each chapter, we have a simple page with a box in it. (each chapter has about 10 pages). The intention is to have the content of the text become the title of the chapter box and have it displayed in the Table of content. The text box itself has several characters of new line in. When I generate the table of contents, InDesign creates several entries in the Table of contents (one per each new line in the text box). So my question is... Is there a way to specify that the content of the entire text box appears as an entry in the Table of contents. (I'd like to update the table of contents by hand to avoid any errors).

  I appreciate any help in this matter.

  Thank you!!

  So, you say that, break forced line and you want that all the rows in the table of contents? I think that I misunderstood.

  If this is the case you're going to the trouble of formatting of the table of contents, as the forced line break will carry you through to the table of contents (you can change the colours using styles or nested GREP and those will not set if you use a different style in the table of contents list itself).

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.