Targus-storage cord USB optical mouse does not

Similar Questions

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• New mini optical mouse does not work

  Hi all:

  I used a mini mouse optical for a few years now without a single problem. I just plugged into the USB port, and that's all. Yesterday it died on me, so I bought a new.

  The mouse does not work and the cursor stays frozen at least that I move it using the touchpad on the laptop.

  OS is Vista
  Satellite P100 series

  More information:

  -the little wheel on the mouse will allow me to scroll the page to the bottom, but it's just what works
  -the drivers are all up to date
  -restore the computer to an earlier date
  -run a full virus/malware scan, nothing came
  -USB are good; I tried all ports, including the ports where something else that works has been connected
  -After I restore and connect my mouse in I saw the computer install the latest drivers

  The only thing I can think is that the new mouse is defective but I doubt that. However, it is possible I suppose.

  Can anyone else think of any other possible explanation and how I can solve this problem. Could something changed in the BIOS? Is there a setting that has changed I have to look?

  Thanks for sharing this with us!

• USB/bluetooth mouse does not.

  I have a mouse mobile memory 8000 who, for some reason, does not work. The issue began yesterday after I used WUBI to install ubuntu alongside vista. My mouse did not work when I booted into vista. The cursor does not move and it does not meet the clicks. I tried wire and modes bluetooth with the same results. I uninstalled and reinstalled an updated version of intellipoint. I uninstalled all associated mouse or eventually the mouse related drivers I could find through the Device Manager and let them reinstall a reboot. The computer recognizes that the mouse is there, he says that everything is working properly and up to date. Any ideas on what could be the cause?

  Edit: I also tried to uninstall Ubuntu without effect. IntelliPoint and device management, yet all drivers are working and up-to-date and the mouse does not work as well. Mousinfo using no movement or mouse clicks are detected by it.

  Hi khukuri,.

  It is possible that the incorrect mouse is selected in the IntelliPoint software.

  See the Microsoft articles and try the steps mentioned below.

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

   

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

   

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• optical mouse does not work.

  What hardware/software problem could prevent a Logtech M185 and a wireless mouse NSB work on a desktop Compaq under Windows XP SP3, after notice of default HID mouse Targus AMW50US at startup from hibernation?

  The problem was my fault and is solved - when I received the error message that I plugged a USB mouse different without uninstall first the mouse failed and the user device human interface entries in Device Manager.  When it was done, I was able to use another wireless optical mouse.

• My Microsoft Wireless Optical Mouse does not communicate with the Transceiver.

  After the return from a road trip, I plugged my Miccrosoft wireless optical mouse and keyboard. At first, communicate with my Toshiba Satellite laptop, but the keyboard now works. The mouse works sporadically if I push the reset button on the Transceiver and he travels the three lights. When I check the State of the mouse, it shows good batteries (I replaced the still) and the right signal. The computer apparently see the mouse, but somehow the orders do not get through the ARVA. Any ideas?

  Hi Peter,.

  What is the model number of the Microsoft Wireless Optical mouse?

  I suggest you try to connect the transceiver to another port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  You can access the links below and follow the steps described in section troubleshooting problem mouse Microsoft Wireless on your computer and check to see if it helps you solve the problem.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/321122/en-us

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• optical mouse does not

  I HAV bought a new laptop from Samsung for first mouse worked well, d but after 4 days its giving "not recnognised message wen inserted into usb port together.

  USB port and mouse R fine... Ihav tried on net solution and I've tried sum

  1 remove battery

  2going to safe mode and uninstall the drives in Device Manager

  They wrked for time sum but again same problem error code 43 properties of device but not avail.please - it give a suggested solution optium according to its process of games that is required for me as this is a common problem and nobody active concrete I HAV searched in many places... Please help urgent

  Hello Rahul,

  Are you able to work with other USB devices on the computer?

  43 error code indicates that one of the motors controlling the unit notified the operating system that the device failed in some way.

  Method 1:

  Run the troubleshooter described in the article.

  
  

  Reference:

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  You can also check after uninstalling and reinstalling USB drivers if you are able to connect the drive. You can disconnect all USB devices and then perform the following steps:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.

  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  d. Repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  If you are still having the same problem then you can check the updated drivers for USB devices. See below the help link.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps.

• Why the Wired Optical mouse does not turn on my computer?

  After I shut down my computer I can either walk by my office work in it and move the mouse, or I can move my mouse and it runs on my pc. Can someone tell me why? Ive entered bios reset all past yet.

  Hello

  Thanks for the display of the query to the Microsoft Community.

  I'll certainly try and help you get the question with the fixed mouse. However, until we start could you give us more information for a better understanding of the issue?

  1. Since when are you facing the issue?

  2. you have any antivirus installed on the computer program?

  3. are you aware of any recent software or hardware on the computer changes?

  You can try to run the Troubleshooting of power utility and check if it helps.

  You can also try the steps and check them off below if it helps:

  1. change the power management option:

  a. Click Start, type devmgmt.msc and press to enter.

  b. Select your mouse and select Properties.

  c. now go to the power management tab, and uncheck "allow this device to wake up the PC.

  I suggest you also update your display drivers, you can log on to the manufacturer's Web site and download the latest drivers and install.

  Hope that information was useful and let us know if you need help in the future about Windows. We will be happy to help you.

• External USB Plug & use mouse does not

  I recently bought a plug & USB mouse to use instead of the touchpad on my computer satellite phone.
  After plugging USB that it loads, but then the dose of the mouse does not work.

  The touchpad still work very well even with connected USB.
  It is not the mouse, as I have tried in various other machines. I also tried other but still the works of touchpad mice.

  From my limited knowledge the mouse appears in the player of games?
  So how can I get the USB mouse works?

  Would be very happy to any local computer help companies want more than 60 pounds to sort, and I don't think that it can be difficult.

  Thank you!!

  Luffy

  Hello

  You say; the USB mouse does not only work on this laptop.
  The mouse works in relation to other computers right?

  First check if the mouse is compatible with your operating system.
  If Yes, then you should check if your USB ports work in relation to other USB devices.
  If other devices would work so I would recommend check if a driver is needed for this USB mouse but generally a form of a gaming mouse has not all drivers

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• The NSB M250r mouse optical/wireless mouse does not connect

  I use a windows XP computer, I got recently a new mouse for. The receiver installed the software for it, but the mouse does not connect. I turn on the mouse, but no connection is established. I tried all USB ports and still nothing.

  I would only try the mouse settle if you have totally abandoned on the support of people in customer service. If you start to disassemble the mouse, you will probably void any warranty that might come with the unit.

• My mouse does not work on a game

  I got the sidki and my mouse does not work on the game. How I've implemented so it will work or is there a way I can use a Xbox 360 controller

  thomaswecker,
  We will need more information to help you with this issue.  What is the game?  What version of Vista are you using?  Is the USB mouse or wireless?  With respect to the use of the x-box360 controller, it depends on the game.  All the instructions for implementing any type of input device, be it a mouse or a game controller, should be included in the games instructions.

  Let us know this information so that we can be of further assistance.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• wireless mouse does not work

  All of a sudden my mouse does not work.  I tried to do what he says to do to another person, but he has not shown in Device Manager, device usb in the list

  On Sunday, February 12, 2012 17:32:58 + 0000, lisabellalord [MVP] wrote:

  You have changed the batteries? The batteries can go fast enough in a wireless mouse; they will also without any warning, a minute of your mouse works, next day it doesn't.

  I'll add my Ditto to that. I played a bit with a wireless mouse for
  only a little time and he abandoned entirely for exactly this reason.

  Ken Blake, Microsoft MVP

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mouse does not work after the upgrade to Windows 7.

  I recently installed Windows 7. All right, except that my mouse does not work. I tried several types: series, USB, PS/2 and wireless. I even bought a Microsoft Mouse, but while the keyboard is very well the mouse still won't play.

  Hi Jollydiver,

  Thanks for posting. You will need to contact HP to see if there is a driver available for Windows 7 chipset.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think