Tech support Forum CHALLENGES to solve the problem of PES Editor once they arrive not

Similar Questions

• I have an iMac that was purchased in 2011. I have CS5.1 installed on it. Recently, I had problems with my internet browser and pop ups. I contacted Apple, we tried to solve the problem, but couldn't. They suggested that I have download El Capit

  !

  Decommissioning the system or upgrade to Illustrator.

  And ask the person to support why they suggested you were going to El Capitan when you run Illustrator. Anyone supported must know now that they behave well between them.

• I continue to receive phone calls from a person to Xinfinity Tech. They insist that they are related to Windows and that if I go to their website they can solve the problem.

  Xinfinity Tech

  I continue to receive phone calls from a person to Xinfinity Tech. They insist that they are related to Windows and that if I go to their website they can solve the problem. I don't trust someone who calls me on the phone like that. Are they legitimate?

  Are they legitimate?

  No!  See...

  I received a phone call from someone who claims to have a Virus
       http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001

  Avoid scams phone & other support Tech Cyber scams
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Avoid scams that use the Microsoft name fraudulently [phone & email]
  http://www.Microsoft.com/security/online-privacy/msName.aspx

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• What does "cannot write: c: / program files/dell support center/imstrayicon" means and how can I solve the problem

  What does "cannot write: c: / program files/dell support central/imstrayicon" mean and how do I remove the note from my screen or solve the problem

  Hi Thomas,

  1. when exactly you get this message?

  2. this happens to you on starup windows or when you try to use a specific program?

  3. did you of recent changes on the computer?

  This seems to be an error related to the centre of Dell Support.

  Step 1:

  If you receive at the start, then you can try to disable any support Dell Center entries in startup items and see if it helps.

  a. Click Start, type msconfig.exe in the start search, and then press ENTER.

  b. click on the Startup tab and uncheck then the program in the list.

  Hope this information is useful.

• I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  Hello

  Just sent you a personal message

  Let me know if you have any question.

• I have no sound when you try to play CD or youtube. My speakers are new and have worked before and my volume is high enough. What can I do to solve the problem, please?

  My computer has been repaired a month ago.  Its worked before but not after bringing the store.

  Hi Anne,.

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, we understand that there is no sound from the speakers to the computer.
  Let me go ahead and help you with the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. what version of the operating system is installed on the computer?
  4. do the sound problem only occur when playing a CD or watch videos of youtube?

  5. what web browser do you use for videos of youtube?
   
  I suggest for the link and follow the steps in the article following the operating system installed on the computer.
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Also see links:
   
  No sound playing an Audio CD in analog Mode on USB speakers

  http://support.Microsoft.com/kb/306706

   

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I can't scan with my kodak all in one soft ware, but I can with the windows Wizard can help you .kodak's struggle to solve the problem for me

  I have windows xp 32-bit 11gigs of free space on the hard drive.kodak said that the software is not installed properly.they tried repeatedly by SANDRINE remote access

  Hi georgeey,

  Please report the problem to the Microsoft Community Forum.
  If we understand it, you cannot scan with the kodak camera.
  We will help you solve the problem.
  1. What is the model number?
  2. have you made changes on the computer recently?
  3. do you get an error message when you try to scan?
   
  It is possible that Kodak may have an older version of its software that works.

  http://support.en.kodak.com/app/answers/detail/A_ID/23858/related/1/selected/true

   

  Method 1:

  Try to install the software to clean boot, and then try to scan

  Reference:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual after a repair.

   

  Method 2:

  If this does not help, please uninstall and reinstall the device driver.

  a. go to control panel and select the device of scaning

  b. right-click on the device and select Uninstall tab drivers.

  to reinstall the driver to see the link given above manufacturer Web site.

   

  Hope above links help you. If the problem persists, you can write back to us and we will be happy to help you more

• Error Nr: 0X8024400A does not update. SP3 required to solve the problem, but can not download through updates.

  Error Nr: 0X8024400A

  Updates will not be updated.

  Microsoft said SP3 required to solve the problem "update", but cannot download SP3 as "updates" do not work.

  Does anyone have a solution?  * E-mail address is removed from the privacy * drop me a line.

  Robert,

  0x8024400A - 2145107958 SUS_E_PT_SOAPCLIENT_PARSE

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  Have you read: (836941) - provides a resolution of problems with a server file, a firewall or proxy HOST settings that block the Windows Update Web site.

  The following article might be worth a visit:

  http://support.Microsoft.com/kb/836941>

  First, verify that the time, date/year & time zone are set correctly

  Set clock>

  Second, try the steps in the link: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/how-can-i-get-windows-update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc>

  Please see the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

  UTC/GMT is 18:15 on Friday, August 31, 2012

• A message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.

  problem of pirate?

  We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.  We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that.  is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking?  Thank you.

  Hello

  That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
  I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
  below.

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Unrecognized 8 GB SDHC card & the patch (KB934428) does not solve the problem.

  I have a CoreMicro SDHC 8 GB card for my new camera from Pentax but my HP computer (running Windows XP SP3, with 5 built in card reader) will not recognize it.  I loaded the patch (KB934428) but it does not solve the problem.  Please help me solve this problem.

  Hello Semmony,

  Thank you for your message.  Check the HP website for the latest driver for your card reader.  If a driver later is available, download and install it.  Please let us know the result.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Ghost of the sent emails from my email using my account, I guess that what needs to be done to stop or solve the problem?

  Ghost of emails sent from my email address. sent from my address book full. What does take to stop or solve the problem?

  Two things may apply here.  The first is that, in fact, someone stole your credentials because you signed in to your mailbox using a public hotspot.  If you can still access your mailbox with a web browser, on a private network (such as your home network) and change your password to something complex and unguessable, using at least 10 characters, the characters being a combination of uppercase and lowercase letters, numbers, punctuation or special characters.  Who must thwart those who have stolen credentials, denying them access to your mailbox.

  The second thing that can apply is that your box to the letters is safe, but your address was hacked, which means that spammers are using their own mailing envelopes but by specifying your e-mail as well as the mailing address, something that is very easy to do something that happens to almost everyone who allows their address be visible in a public forum (such as Facebook or an online discussion group).  This case if it is a serious problem and not a threat to you.  Since spammers change mailing addresses frequently, they will move to use yours.

  You can usually tell the difference between these cases because in the first case, you would probably lose access to your mailbox because the spammer changed your credentials based on himself.  It's a problem that you need to address with your e-mail service provider.   You can also see evidence of the compromise because targeted friends can send you copies of the messages they received, and you will be able to confirm from the message turned headers to your e-mail service provider's network.  The latter manifests mainly because you will begin to get NDRs to addresses that you don't recognize or are clearly fake.  In this case, just remove and stop worrying.  They will stop after a while.  Even still, it is always advisable to change the passwords to your services online all the months to protect against the compromise.  Tools like lastpass.com are beneficial to help keep you straight.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Microsoft fix it Center unable to solve the problem because the error code 800154

  My computer is running slow and sometimes hangs.  I tried to improve or correct this problem through the difficulty it Center Microsoft.  I have programs stalled unin I thought my being the cause of (these) problems.  I get an "error code 800154" and this error code blocks any other measure to correct my problem.  Can you help me?

  Harold Nelson * E-mail address is removed from the privacy *   

  Hello

  (1) did you do changes on the computer before this problem?

  (2) what is the full error message or error code?

  (3) when you receive the error message, it is trying to run the fix it?

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: the data files that are infected can be cleaned by removing the file completely, which means there is a risk of data loss.

  Method 2:
  
  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
                                                                                                                       
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  
  Method 3:

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  If the error is due to this problem, then I recommend you to get in touch with Microsoft Fix it Center forums

  http://social.Microsoft.com/forums/is/fixitcenter/threads

  It will be useful.

• My cd/dvd drive has disappeared. All trying to solve the problems of the code 19 appears. How can I get the cd/dvd drive F?

  my cd/dvd drive has stopped working.  He said after a repair code 19.  How to restore the drive?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi