Tecra A2: IDE error after firmware update #1

Similar Questions

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR: NTVDM CPU has encountered an invalid statement." Close to terminate the program.

  I GET AN ERROR AFTER EACH UPDATE/MAINTENANCE OF THE GAME, CABAL ONLINE. ERROR MSG: 16-BIT subsystem "ERROR:"NTVDM CPU has met an invalid statement. " Close to terminate the program. "The file may be corrupt is either the update.exe from the game or the command.com in windows system32. This has happened before, and the only thing that I did to get the game back is to perform a system recovery (which im gona not remake). I want to know how to prevent the "update.exe" or command.com to be corrupted every update of the game. I tried to contact the manufacturer of the game, but they do not seem to respond immediately. and their forums are not as useful as I thought it would be. PLEASE HELP ME!

  fl0bot,
  The message you are getting means that there is some corrupt system files that could not be fixed.  If you look in the CBS.log file , it should tell you which files.  When you do that, you can try to replace the corrupt files.  However this seems to happen whenever you update it a game then you will need to contact their support for aid as this can be a problem for them.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tecra M10 - #1 IDE error after changing ODD

  Hello community

  I know that the M10 is old enough, but until last week, worked well.

  First of all, there is no STRANGE access: drive doesn't recognize any media. After changing the STRANGE, I got the error IDE #1. After a little research I found that this must be a matter of ide toshiba cross wiring (?). Found something on the overcoming of the pins, but it did not work. Because I wanted to reinstall Windows XP (but the ODD is broken) I put the HARD drive in another laptop, removing all partitions on this subject, a reinstall a XP clear on that.
  Back on the M10, the laptop does not start but remains in a black screen with a blinking cursor.

  Anyone have any useful suggestions on these issues?

  Greetings and see you soon,
  Herz.aus.Gold

  Hello

  In my opinion the IDE error appears due bad master/slave setting of the new CD/DVD drive.

  The fact is that not all drives are compatible with all laptops. So the best option would communicate with a service provider allowed for a new compatible drive. An alternative, you can also buy the same car from an another computer store

• Sansa Fuze - insufficient volume after firmware update

  After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

  Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

  Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

  I just wanted you to save a lot of hassle!  Your volume option will be available again.

  With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

  Bob

• Misprints LaserJet 500 M551 after firmware update

  I recently updated the firmware on the M551 dn 500 laserjet printer.  I installed the update of the firmware successfully, but I keep is printed with characters on the pages 'trash '.  He randomally prints this way and is not consistent.  I don't have that happen after the upgrade.

  I updated the firmware twice in an attempt to erase mistakes without result.

  I did the format clean and complete part and I still get the same errors that occur.

  I tried the upgrade to the current pcl6 driver as well.

  I use windows xp and older windows programs.  This happens in the office software and software autodesk as well.

  I am ready to return to the previous update of the firmware if possible.  I had problems with this firmware update so (printer refuses to print after a period of time), but I'm ready to come back just so that I can keep the waste of paper.

  I've attached an example of printed copies.

  Hi vbrown,

  I don't know what worm pcl6. you use, but try to drive perhaps PS

• BDP-S350: problems AFTER firmware update

  I recently bought a copy of "Guardians of the Galaxy" on blu - ray, and when it arrived I put in my player SONY BDP-S350 and watched all of the 2D version of the film.  At this time there the S350 was running version 07.1.009 firmware.

  Then, I got the brilliant idea to do better all by updating my firmware.  After a bit of difficulty (entirely my fault - RTFM) I've successfully upgraded to the version of the firmware 07.2.026.

  I just tried to play the same disc of "Guardians of the Galaxy" that I saw before the upgrade and the S350 reports it is unrecognizable and is yet to play.

  Other, older, blu - ray discs play normally, and regular DVD movies play too.

  Anyone had this happen with a BDP-S350?  I know that firmware update is not removable... advice?

  Thank you!

  I solved it!

  I put a USB in the port to "EXT", thinking that it would so add wonderful new capabilities to my BDP-S350.   Instead, he sprayed some features and made it impossible to play a blu - ray disc that plays perfectly well than a week ago.

  I disabled the BDP-S350, removed the USB, back running the BDP-S350 and "Guardians of the Galaxy" playing right now!

  L8R...

• The airPort Extreme is not working after Firmware update

  Hello

  At our office, we have several AirPort Extreme or TimeCapsules and one of them (AirPort Extreme) stop working properly after the update 7.7.7

  The update itself is supposed to be ok and we have updated all our stations but it only seems to not work. I have hard and factory reset and somehow until last month worked more less, but from this week completely stop working and even reset does not work.

  I already ran out of ideas and it seems that Apple wants to charge me $ 30 for a phone call.

  Someone at - it a similar case? Should I take on the Apple Store?

  Thanks in advance for your help.

  You can get it replaced if it is less than one year... That is to say in the warranty or if you have any computer or ipad or apple TV which is covered by the applecare will also cover the airport up to 3 years old if EI is less than 2 years, you can still buy applecare on a product calling... or you can buy say an apple TV and buy applecare for it.

  If Apple do not repair them. only, they will be replaced.

• ScanJet 7400c - does not work after firmware update.

  From scratch.

  Windows XP sp3

  HP PrecisionScan Pro 3.02 software installed.

  then add the update of the firmware.8s which is supposed to fix some problems. One being a squeak in certain situations. A problem I had met.

  Otherwise the scanner worked fine.

  now it doesn't work at all. Scanner displays 'error 07' at any time, it is asked to do something. Also get the message scanner could not be initialized Scanner not found)

  What really bothers me is that it worked before the updates.

  Now, nothing.

  I tried to reload the updates, then tap, disconnect, restart the process.

  Is the Junk to scan?

  Read before:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj678en & LC = on & DLC = in & CC = US & Product = 59553 & os = 228 & lang = in

  Title:

  ScanJet 7400 c / 7450c / 7490c USB and SCSI - Firmware update.

  FYI, connected by usb

  Apparently the update does not what he claims too.

• Qosmio G20-127: after firmware update cannot burn CD or DVD

  I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
  install the old firmware F101, but I can't so please help me?

  Thanx

  Hello

  How do update you?
  Before update you the firmware, follow this:
  -Always use AC adapter to avoid a power off by updating the F / w.
  -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
  -Put an end to all applications except the F/W update of the program.
  -Are not completed with force the F/W update program
  -Be sure to manually restart Windows after completing the update.
  -Update program automatically eliminates the ineligible disks

• Toshiba 47M7463DG no clouds do not service after firmware update

  Hi all
  I have a problem with my Toshiba 47L7463DG. Services (accessible from the Home button) Cloud stopped working after the recent firmware upgraded. Is there something I can do to return to the previous version of firmware or solve this problem?

  Details:
  Toshiba 2014-051
  May 21, 2015
  Version of the 8.1.97.09.01.1 software
  MBoot Version 00813201
  Shipout G

  Thanks in advance.
  hysten

  After each update of the firmware, reset the TV.
  If you don't, I recommend you perform this procedure...

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• Error: "Universal Firmware updater has stopped working."

  So, I had so many problems with my rocket lately that I can't list them all yet. My previous thread explains the major problem.

  And now I get this message: "Universal firmware updater for Sandisk Sansa MP3 players has stopped working". It indicates a problem due to stop working correctly. Windows will close and inform me of all solutions. And he NEVER does. * sigh *.

  Then... First of all, this error has something to do with the strange behaviour of my rocket (freezing, take a break, deleating songs, etc.)? Or is it not?

  Whatever it is, how exactly this error affect me?

  Please and thank you.

  the update of the firmware is not really necessary. You can uninstall it in Add Remove programs. If you need to perform a firmware update just come here. at the top of the Board of Directors is a message from stickied with manual update instructions. very easy to do and won't give you the grief of the updater.