Tecra A9 - Windows 10 - unstable (Ethernet) network
Hello
the ethernet connection became unstable after the upgrade to W7 Pro to Pro W10 (WiFi works fine).
It's always the same error: "NDIS:... network interface has been reset... network driver asked to reset... '. "(roughly - translated to > en). A 'ping
One of the side effects (suspicion) is that when it gets to the touchpad or mouse possibility are glued / stutter. Without a doubt, the problem started after the upgrade to Windows 10 because that never broke under Windows 7 Acronis backups. But 10 Windows the first backup (and too subsequent attempts) failed with errors on the network. Kind regards ---------- P.S.: Everything works perfectly under W10 on this laptop 'antique '. Hello Have you found a solution? Greetings Tags: Toshiba I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network. The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine. It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive. I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines. Thanks for your help. Thank you for your help. Unstable wireless network (windows 7) I have the unstable wireless network. It goes up and down, very often it is said that there is no internet connection. It may be worth trying to change the channel that your wireless router is configured to use, there may be interference from other wireless devices or the surrounding networks. What a b/g or n wireless network? not possible to bind a variable shared via Ethernet network Hello! I have computer A and B with windows xp, sp3 and labview 8.6, professional edition. The two computers are in the ethernet network. I'd like to Exchange data between two applications of LV using shared variables. I create a shared variable (published network) on both computers. Do you have any idea how to solve this problem? Thank you for the answers. Hi , Visit this link, maybe it can help you. Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium) I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing. I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred". I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well. It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers? Kind regards Jason. SOLVED It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections. Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged. Kind regards WRT 1900AC and Windows 7 on the network or naming issues Background: I had a Linksys E3000 up and running for about 5 years in a stable network environment. The E3000 is dead, and I put in a new 1900AC WRT to replace. Doing of things set up correctly the main 'name network' in my network poster shows up as a name given to a part of my network wireless. The "Wired" part appears in diagrams and windows, as well as the bands main wirless, but not as the nodal point between computers cable and internet Win7, I want to get the machines to Windows 7 on my network to display the name of cable system in Windows 7, as the primary network and NOT one of those wireless. Almost everything I want to be able to do works very well except for the display of the network card in Windows 7 when I tried to set up a 'House' group that does not yield to my efforts.,. I use the notation 'suffix' in the name, so is my router on ethernet. I'm not ready to take this option, partly because I managed to apply each official Linksys/Belkin new update to this firmware to the router via a network connected to the interface of the web browser, app management Andoroid meets most of my needs and that the router is in a section of closet custom built interface built in an old House we updated to convert a vestibule in two closets.
The router sits above a coat bar with the phone and networking hub for a small household of Ethernet wiring devices, coaxial cable and telephone wiring central location includes a small battery assisted power conditioner for the cable modem, the hubs and the router itself as well as the power supply for a connected NAS drive to the port of the router using USB 2.0 speed (the drive is older than the router , but the operating system to wake up when one of the connected devices want to access once it is mapped on the computer. The only precaution I had to take was to not implement the external login to the router with the same credentials used by the Android app that I use to check things and if necessary to restart, etc if I don't want to run a computer and connect in this way. If I had to 'flash' of the router manually, I have to be sure I could worm my way in this cabinet, unplug everything, then consider somewhere, performing surgery and then carry all back and reconnect it. I'm 72 with cataracts of too many years of watching from the CRT in my youth. I prefer not to tighten my back, or down a small stepladder, I need just to get up there where I see things. Perhaps when we move, I'll take with me to Kendal at Oberlin and set up again in a configuration that is more appropriate for a bungalow in a community with large campus wireless available to everyone... This could be interesting. I hope that if will meet my needs "such what" until then. BTW, I'm getting pretty good wireless reception on my terrace outside a two-story built in 1939 with hard plaster, brick slab concrete and brick walls of full course between the router and me! Install the software not found on my OfficeJet Pro 8000 wired Ethernet network I'm trying to reinstall an OfficeJet Pro 8000 on my wired ethernet network using the 'minimum' driver install. My PC is Windows 7 Pro (32 bit). I have the printer configured with a static IP address, I can successfully ping and accessing the Web page printers via the IP address. I have uninstalled the HP 8000 software using the two installation software "uninstall" and you run the HP removal utility and have restarted the PC. I disabled my firewall ZoneAlarm and AV/AS software for installation. During the resettlement process, when the software is looking for network printer, it cannont find the printer on the network, despite the fact that I can ping the printer directly and access its Web page via IE. Using the advanced search and entering the IP address of the printer does nothing. I'm at the end of my ideas on what to try (I said this whole process about 3 times now with the same results!). What Miss me? Thank you Download and run this utility: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104282-2&cc=us&dlc=en&lc=en&os=4063&product=4083977&sw_lang= What did he say? Ethernet network Officejet Pro L7555 printer-perfect on one but feel problems with others My HP Officejet Pro L7555 is connected to an ethernet network. Two computers are on the network in the same residential group. The printer is installed on computer A (I-5 with Win 7 Pro) files downtloaded the HP support assistance. It is shared with computer B (I-3 with Win 7 Home). The printer works perfectly with A computer, which gives a perfect page test, but on computer B, it will print only a small portion of the top line, true for all applications I tried to print from. When I try to use the HP solution on computer A Center, I receive a message that the installation is not complete. The Scan doesn't work at all, showing no connection when used with Windows Fax & Scan, but then I could never run early on with my old Windows XP computers, and all attempts to download updates for the older systems failed. Print clues about how to solve the problem would be greatly appreciated. J_A_K 8Lives, Just a note to say thanks for hanging with me and driving me to an exceptional result. The printer work from now on, the two computers and not only as a printer, but as a fully functional all-in-one. He has never worked this way before, mode scan fax or computer. I hope that my questions has not caused too much eye-rolling on your part. Be accomplished without your knowledge, this never could clear and excellent help. I especially appreciate timely responses, you have done throughout this process. Kind regards J_A_K Original title: no network card I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems. Tecra S3 Windows Explorer crashes on copying files and other actions Tecra S3 Windows Explorer crashes frequently on the copy of files and other actions. In the system event log, you find the event ID 26 Application Popup Explorer.exe Application error problem (in Dutch: Toepassingsfout) read write memory error. Start the Softex Omnipass Service service. Change the startup type to automatic. The problem will not happen again. You don't have to use this application after the service started. Post edited by: wboere Hello Unfortunately, this path is not easy to say anything because, who know what did you do with OS and how is your personal configuration. If this problem occurs because some time roll back OS to an earlier time using System Restore tool. Also check this page useful http://www.helpwithwindows.com/techfiles/explorer-crashes.html maybe you'll find some answers there. Cannot access Ethernet network I have recently updated my network router and has difficulties to get things to work. My Internet is wireless (no land line). For more than 6 years, I have used with success a Netgear MBR624GU 3 G Router wireless broadband that allowed me to access the Internet as well as to support a physical Ethernet network (with other computers, printers and a Sonos music system with the iTunes library on a NAS). The Netgear router was also on the Ethernet network (all with 192.168.2.0/24 IP addresses). There is also WiFi access for iPad, etc. Go now my new contract LTE brought me a router Huawei Mobile WiFi E5577C. There is no Ethernet port. I managed to access the Internet through it. However, I cannot now access the Ethernet - ping reports "Request Timeout" and printers and Sonos system are not accessible. This seems strange to me, I thought of a direct access to the physical network should be easy. I tried things like turn off Wi - Fi, but who did not have Ethernet access works. I put the Ethernet network with the highest priority in the order of Service, a second Wi - Fi connection. Currently I have two Ethernet and Wi - Fi configured manually (attribution 192.168.3.0 Wi - Fi and Ethernet 192.168.2.0 IP addresses, Wi - Fi with 192.168.3.2 as router - I also tried to use DHCP but with no more success). I also tried with and without the Netgear router that is also attached to the Ether net but that doesn't seem to make a difference. I thought that I have perhaps need a router different with a port Ethernet (like the Netgear) but, given that I have to pay for that myself, I know whether it is the only solution before spending money. I guess I understood something wrongly in this configuration. If anyone can give me any advice or suggest what I might try, I'll be very grateful. If I should post more detailed data, please let me know. You are going to have to implement some sort of IP routing or bridging of the connected to the wireless network, or you will need to implement local areas with several connections network with separate subnets. You might need the static routes for devices with multiple network paths, but you will need at least to have your wireline and wireless in separate subnets. This so that your network traffic can be set via Wi - Fi to the ISP, or via cables to other local devices. Or get a modem that has wired and wireless. Or one that has a cable, if you are inclined to set up and manage your own network. If there is the budget and the desire to run your own network... My usual preference involves isolated for each of the main functions and including the PSI at the edge device and devices configured to a minimum. In other words, an ISP modem device with a wired connection and a "bridge" of the ISP connection mode. Then a box of firewall router gateway controlled locally and a distinct feature of Wi - Fi and preferably one with an access point (AP) mode. Get your own gateway firewall services, NAT and associated box. Keep your ISP as simple as possible. It is more boxes at the front, but when a box crashes or when you change your ISP, you may need to change only the ISP modem. Other devices will not need to change. There are positives and negatives of this approach points as, for example - you also manage all the security of your network and your configuration, 'in' your network 'behind' the ISP modem. The ISP technicians can get only in what concerns the modem and only will help you with the part of your network. Network Bridge: works like a piece of wire to a wired network for most of the considerations. Transparent background for IP network traffic. Network router: transfers the IP traffic between two or more different IP subnets. Very well visible for IP network traffic. Welcome to IP network. How to add the computer to the ethernet network For some unknown reason, a MacBook Pro than on the ethernet network home. Previously I would just plug the ethernet cable and the connection is between my Mac Pro and the laptop, but not more. What are the settings must be restored? If no changes were made for all the work previously to check setting on the Mac, the other end. The cable could be bad or the router/modem may have been modified. I guess that all Internet services do NOT work on the laptop. Ethernet network card does not show my Satellite L830 - 16H Hello Ethernet network adapter do not show my Toshiba Satellite L830 - 16H, and it can not reset it What can you do to restore it? I thank everyone You can try to access the BIOS (turn the unit on and press F2) and set it to default and save the changes. Otherwise, it can be device LAN card problem. I think you can try using an optional USB LAN RJ45 Ethernet adapter How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP How can I solve miss me TCMSVR. DLL on a TECRA S1 Windows XP Please check this topic on the forum: Maybe it helps, but it seems that it s a part of the Toshiba drivers or file that is missing. Windows cannot find any networks Hi all My dsl network connection is not discovered by vista suddenly I have tried all possible means, but to no avail any help would be greatly appreciated! the error message says "windows cannot find any network." its a DSL connected via a LAN connection I think I found the culprit, it turns out be a updated windows defender definition... ive stopped using my network connections now run fine LOL print iCal appointment end time. Hello, everyone. I need an answer to this problem, I met with some urgency and would appreciate any help that you can offer and share. How do I print iCal in month view and have both start and end times of appointments printed? I tried, but so far I' Satellite L455D-S5976 - blue screen after BIOS update fan was not functioning causing overheat if updated the bios,See here[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67086&tstart=0] and now I'm blue screening (it flashes very quickly), just like the windows xp on startup scr HP Deskjet 3050 j610 series will support e-print I have HP deskjet 3050 j610 will this e-printing support You can add a program to return to the list of "programs" in the Start Menu? How to place a return on the 'Programs' menu program / registration? I accidentally move and now I can't replace it where it was originally (in the accessories section). I put in the system 32 file is not so accessible. Help! HP pavilion dv9300, vista upgrade and add 2g of memory last year, drawn from the Tec Stable I could c mos problem. Peeps 4 time and stay flashing with black screen.
Jörg
I have the same problem and have no idea how fix it.
GunnarSimilar Questions
I'm a meter the router, I have not all devices that could interrupt my wireless network. I also tried disabling my wirewall and my computer of viruses (no found) scanning. I have another computer with the cable network, and it works perfectly. I use a router D-Link (DIR - 615). What could be the problem?
The problem is in the properties of shared variables not possible to bind the variable of the remote computer to the local computer. In the first step, there is even no possible to see any computer on the network. After the registration of the computer (Tools-> shared-> computer registry variable)
I see the computer remote, but without any variable sharing.
Jason.
I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.
Sometimes this help
The fix can be very expensive because such port is part of the motherboard.
Christian
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16564Maybe you are looking for