Tecra M2 crashes after once the connection after I reloaded XP SP2

Similar Questions

• Tecra S1: How to configure the connection of modem to dial upward

  Hi all

  Would someone be able to help me how I should configure the modem connection to dial upward, I tried to do it through the connection of the Wizard but it does not dial a number and I have no idea what could be the problem.

  Would be very grateful for help.
  Thanks, Nathan

  Hello

  Do you get any error messages?
  The Connection Wizard is very simple and I don t know what you could do wrong during the installation procedure.

  Hmmm please check the option in the properties of the modem so wait for dial tone before dialing is not checked.
  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• Tecra 9100 crashes after a few minutes

  My Tecra9100 (P4, 1.8 Ghz) freezes after a few minutes. He shows no reaction on the keyboard or mouse input.
  No matter if I am using Windows XP, Linux or simply enter the BIOS.

  Restart the system leads to a shorter period until the freezing point (a few seconds).

  First of all I thought about overheating of the CPU, but a small hardware tool shows me that the temperature is normal and the cooling fan works.

  Any idea? Maybe a problem with the VGA?

  Hello

  Yes, it s perhaps something wrong with VGA, but I think it could be a fault memory.
  Try to replace the modules and check if there is some performance enhancements.

  Otherwise, the technician must check the motherboard specifications
  You know it; It is always not easy to say what could be wrong without any diagnostic procedure

• MacBook Pro sound stops once the connection when plugged headphones

  On my MacBook Pro, when I connected my jack 3.5 mm (headphones or speakers) and I switched off, the sound stops once I have connection, once again. The speaker icon is gray and I have to remove and reinsert the connector to get her back. Can you help me, please? Thank you.

  Check your settings in the Audio Midi application located in the Utilities folder.

  http://support.Apple.com/kb/TS1574 Troubleshooting for any audio speakers on Macs

  
  

  Trick/Tip: Open GarageBand if installed then, open a program (optional).

  Quit out of the app from GarageBand.

  =====================

  Repair Mac mysteriously mute

  The background on the issue, is that there is a switch small sensor inside the plug headphones. When you insert a headphone jack, the sensor includes what is what and changes the setting of audio output for headphones. If you insert a jack for digital audio output, the unit switches to digital output. When you completely remove the plug, it should read the internal speakers.

  The spirits tell me that there is a very good chance that you recently had something hostage in this port, a set of headphones or a cable leading to powered speakers, for example. When you remove the plug, something in the port have prevented triggering sensor properly. That's why you see Digital Out instead of the internal speakers.

  The solution is to force the sensor to do its job. The safest way to do this is to simply run a plug in and out of the port, a few times. A large part of the time, this takes care of the problem by triggering sensor correctly. If this does not work, there may be dirt in the port. Before moving on to more invasive techniques, get a can of compressed air, plug the small tube which corresponds to the nozzle and the breath to air a few shots in the lane. With a little luck, should dislodge dirt and the port will operate as it should.

  If this does not work, find a swab to foam tip that fits (electronics stores generally carry), dip it in rubbing alcohol and insert gently into the helmet in an attempt to wipe any tenacious dirt. I recommend foam rather than cotton fleece because the variety of cotton could leave the son behind. (This same technique works well with the bad conduct of ports from headphone output on devices such as iOS devices).

  It is possible that dirt has nothing to do with it. On the contrary, it may be that the switch should just a subtle help. If a socket or a buffer does not work, I have heard people resetting successfully with a deft poke with a toothpick.

  http://www.Macworld.com/article/2031146/repairing-the-mysteriously-muted-Mac.htm l

  

• Once the connection CC guard spinning. Stops and says that I have to redownload CC

  See above, it's my problem. Illustrator did not work properly. So I wanted to sync with the latest version, but the then cc not working anymore.

  Then after several tests I used the Adobe cleaner to remove all the Adobe programs. But now CC says the CC app is old or damaged and I need to install the latest version every time. But I did it. 6 x already.

  Can someone help please!

  Thank you

  Mary-Ann

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Get form elements after the connection

  Hello
  
  I would like to know if it is possible to fetch the right elements of form once the connection.
  I would like my users connect and then get the results of a form (of course if the form has been entered before).
  I tried to develop process process = TABLE row, "Onload before header, and before the foot of page Onload, etc", but does not.
  Any ideas?
  
  Thank you
  VC

  VC,

  I received from you. Try moving your code to fill the page item 0 in the process of authentication of message of your authentication scheme. Do fill the page 1 element directly.

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen

• Once the VPN connection is established, cannot ping or you connect other IP devices

  Try to get a RV016 installed and work so that people can work from home.  You will need to charge customers remote both WIN XP and MAC OS X.

  Have the configured router and works fine with the VPN Linksys client for WIN XP users.  Can connect, ping, mount the shared disks, print to printers to intellectual property, etc.

  Can connect to the router fine with two VPN clients third 3 for Mac: VPN Tracker and IPSecuritas.  However, once the connection is established, cannot ping the VPN LinkSYS router or any other IP address on the LAN Office.  Turn the firewall on or off makes no difference.

  Is there documentation anywhere that describes how the LinksysVPN for Windows Client communicates so these can be replicated in 3rd VPN clients from third parties for the Mac in OS X?

  The connection with IPSecuritas and VPN Tracker is performed using a shared key and a domain name.  It is not a conflict of IP address network between the client and the VPN 192.168.0.0/24 network.

  VPN Tracker and IPSecuritas are able to connect to the routers CISCO easy VPN with no poblem.

  Any ideas on how to get the RV016 to work for non-Windows users?

  We found and fixed the problem, so using VPN Tracker or current IPSecuritas on OS X people have access to the LAN via the RV016 machines. The "remote networks" in the screen BASE in VPN Tracker has been set on the entire subnet: 192.168.0.0/255.255.255.0 the in the RV016 has been set to the IP of 192.168.0.1 to 192.168.0.254 range. Even if the addresses are essentially the same, without specifying the full subnet in the RV016 has allowed the connection to do but prevented the VPN client machine to connect because the RV016 would pass all traffic to the Remote LAN. Change the setting of 'local group' in RV016 settings in the screen "VPN/summary/GroupVPN', 'Local Group Zone' for the subnet 192.168.0.0/24 full solved the problem.

• How to configure Task Scheduler to run the program when the connection is established

  Windows 7 64 bit
  Dial-up Internet access

  I want to use the Windows 7 Task Scheduler to run a program IMMEDIATELY AFTER a dial-up connection is made to the internet.

  How can I configure the Task Scheduler in Windows 7 to do this, please?

  I am familiar with the Scheduler of tasks with the command line parameters.  Any help is appreciated.

  Thank you

  FYI: If an example is needed, Microsoft Security Essentials can be configured to update virus through this path with the argument definitions:

  C:\Program Files\Microsoft Security Essentials/MpCmdRun.exe SignatureUpdate

  Maybe someone can use it to show how to configure the Windows 7 Task Scheduler to update MSE virus definitions, once the connection dial-up was made?

  Otherwise, for example, another program to run once established a dial-up connection would be OK, thanks

  Hello

  Scheduler of tasks is time driven.

  For order-driven event, you need a script.

  Question like that is much better treated in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Skype crashes after the connection

  Hey. I've been Googling around this problem for days now and can't seem to find relief. I can't describe the problem in some other way that once I log on Skype, the program crashes immediately. The event viewer does not seem to save the crash, but if I use Ctrl-f to find the papers that mention Skype, I get a newspaper that looks like this.

  Log name: Application
  Source: Application error
  Date: 06/02/2014-17:38:33
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Floyd
  Description:
  Name of the failing application: Skype.exe, version: 6.16.0.105, time stamp: 0x536b4342
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.17932, time stamp: 0 x 50327672
  Exception code: 0xe0fafafa
  Offset: 0x0000c41f
  ID of the process failed: 0x51c
  Start time of application vulnerabilities: 0x01cf7e810d4706dd
  The failing application path: A:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 55b80b38-ea74-11e3-80dd-e8c4eed11948
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
  
  
  1000
  2
  100
  0 x 80000000000000
  
  44536
  Application
  Floyd
  
  
  
  Skype.exe
  6.16.0.105
  536b 4342
  KERNELBASE.dll
  6.1.7601.17932
  50327672
  e0fafafa
  0000c41f
  31%
  01cf7e810d4706dd
  A:\Program files (x86)\Skype\Phone\Skype.exe
  C:\Windows\syswow64\KERNELBASE.dll
  55b80b38-ea74-11E3-80DD-e8c4eed11948
  
  

  I tried the two relocation with many different versions, I deleted the Skype roaming folder several times. I am at the end - of my mind please help!

  OK I solved it.

  for some reason, I can't find any tutorial how to uninstall captures webcam that remain on the computer even after having to remove their since appwiz.

  the Skype is accident because the driver of the webcam ip.

  I download another driver for the webcam and when I install it it deafult camera then after that its work.

  If you don't understand me not so ill make it easy.

  If the driver of the webcam ip is your camera deafult on Skype. your Skype will crash. If you need to install the other driver to make the webcam ip is not not deafult.

  I use iwebcamera driver, you can use what you want.

  Good luck.

• 7.0.0.102 crashes immediately after the connection

  After update to Skype 7, it crashes immediately after the connection.

  I don't have facerig or FFsplit or any webcams. Update of Windows Firewall is disabled.

  The event logs show this:

  Name of the failing application: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Name of the failed module: Skype.exe, version: 7.0.0.102, time stamp: 0x54897add
  Exception code: 0xc0000005
  Offset: 0x00d527d7
  ID of the process failed: 0x1e7c
  Start time of application vulnerabilities: 0x01d029890c579caf
  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Path of the failing module: C:\Program Files (x86)\Skype\Phone\Skype.exe
  Report ID: 58eb96c6-957c-11e4-aae2-00224d806fdf

  Any ideas that I can do to make it work again?

  I don't know, but maybe it's one of several cases in the latest version of Skype 7.0 is not able properly to interpret data from the BIOS. At least, that was the issue with the cases already reported with this error message:

  Exception code: 0xc0000005

  Offset: 0x00d527d7

  A fix may be available in one of the next versions of Skype. In the meantime, the solution is to uninstall version 7.0 and install the 6.21.0.104 previous version.

  http://download.Skype.com/MSI/SkypeSetup_6.21.0.104.msi

• Screen 5600ea - completely black HP Omni 10 after crash while on the remote desktop connection

  I hope someone can help me with this.

  I had updated my Omni 10 to Windows Pro 8.1 so that I can Office remotely on my tablet on my work lan to get the benefits of the 2013 Office (we have not this version to work) on my work PC.

  Anyway, while it is connected to my 10 Omni via desktop remotely my Omni 10 crashed after connecting a USB drive that is powered via a USB OTG adapter. I used the front adapter without any problem with the USB card readers bus-powered and also the Lan USB card so I know it works, and the outlet powered USB hard drive works on my PC without any problem.

  The Omni disconnected from the remote desktop, and I guess it crashed, but the screen is black even when I hold down the power button and wait for the vibration (which usually means that it is set to zero).

  There is nothing displayed on screen, my work PC is unable to connect via Remote Desktop, and any number of power cycles seems to relive.

  I tried with the attached Omni 10 charger and without.

  There is no HP logo involve restarting at any point, but the Windows key infiltrates a vibration when I push on it.

  While enjoying the fact that the Omni 10 comes with the base Windows 8.1 and not Pro so I changed the configuration it worked fine for a few weeks since the installation.

  Pointers on getting this thing to life would be appreciated.

  Thanks in advance.

  I returned to the store that I bought, and they sent to HP for warranty repair.

  28 days ago so I went back to the store and they gave me a brand new boxed 10 Omni processor.

  When I got home I installed the driver and Windows updates. I noticed that the WiFi reception was really bad, even right next to my router, and the cameras had lines on the screen and the pictures that I took.

  The next day I went back to the store and they said all that and they initially said that I have to wait another 28 days, while it went for repair. When I said that this was not acceptable, they gave me a full refund of the amount that I had paid and used that to purchase a Pro of Microsoft Surface.

  The Microsoft Surface Pro is fast, well doneand more importantly everything works.

   

  TAKE NOTE, HP - IT IS HOW A WINDOWS TABLET SHOULD BE.

   

  I'm done with lag, unstable and downright unreliable HP products.

• Installed the creative cloud, repeatedly crashes after the connection

  I just downloaded and installed the CC on my Mac, and it seems to work fine until I have connect with my Adobe ID, then it crashes after a few seconds and continues to do so every time that I open the app it again. I looked on the Adobe Web site by using troubleshooting, but their solutions gave no useful result. They told me to remove the OOBE folder in my library applications support folder, restart my computer, and then try again. I did, and it seemed to work until I signed up again, then it quickly crashed. All I have this problem or knows how to solve this problem? I really need this software soon!

  uninstall, clean and reinstall by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• JVM crashes after the MASTER: "admitted a new connection.

  Hi all
  
  We are facing a strange problem, and we hope that you can give us some light.
  
  
  We have a web - app in Pier, who manages our environment from Berkeley.
  We have activated the replication between the 2 servers, a master and a replica.
  
  The problem is, these days, if we start the master server it crashes after a period of 15 to 30 minutes.
  
  I see the following messages in the journal:
  [6541:609000] [3144/3736] MASTER: accepts a new connection
  Although the replica server is down!
  
  Then:
  ATTENTION: Database problem, it is necessary to stop the run recovery
  our replication custom EventHandlerAdapter.handlePanicEvent)
  
  And then crashes the JVM and disappears from the pier.
  I enabled Verbose for all flags of replication, in EnvironmentConfig, but I have not the newspaper more for this problem.
  
  
  I wan wondering if you can think of any ways to get into the problem and track.
  Replication works on port 8080, is it possible that a request from somewhere that uses port 8080 to confuse the replication manager?
  Is there a way to get more information on this subject "accepted" the new connection and debugging perhaps?
  
  
  Thanks in advance!
  
  We use Berkeley DB 11 GR 2 5.1.25

  We have similar problems in some of our test Replication Manager.

  To learn more about which port 8080 fact if you're on Linux or a similar operating system is to do the following:

  lsof-i TCP:8080

  The output will contain the PIDs. You can see what works a PID (e.g. 3892) with the following:

  PS Pei 3892

  A question we had was that our tests sometimes used the ephemeral ports, which can be arbitrarily assigned by the operating system for any other purpose. We have solved this problem by ensuring that we avoid using an ephemeral port on the BONES where we organize a test. You can check if 8080 is in the range of ephemeral ports for your operating system. Here is a link that explains more about the ephemeral ports and how to determine the range on different operating systems:

  http://www.NcFTP.com/NcFTPd/doc/Misc/ephemeral_ports.html

  Paula Bingham
  Oracle

• Laptop crashes after the battery is connected, must charge laptopn until I use it... irritating

  My laptop caused a lot of problems and I don't know why. This is beacause of my driver problem? By the way, my laptopn was bought in year 2007 while the driver is old enough so it's because of my driver? My battery seems fine, I bought it not too long because my previous charged was broken and the new charger autour cost $99.So can someone help me?

  You have a hardware problem-the battery, the charge adapter, the connections between then, or maybe even something else (I can't say without testing).  It is possible the battery you bought is not exactly compatible with your system, if it was not EXACTLY the same battery.  I recommend that take you to a repair shop of computer good reputation for service and a diagnosis of the problem.  You could also send it to the manufacturer for service.  Compare the costs, the calendar, warranties, parts availability, reputation and any other factor consider you important and make your choice.

  Why are removing you the battery in any way - why isn't she always left in the laptop and the charger plugged in during the night (even if the system is stopped) in order to regain full battery charge and this problem never occurs (even if you still have a problem that needs to be fixed - at least irritation will decrease until get you it fixed)?

  And what driver are you talking about?  You said nothing about what driver for this device or is that the problem or when it occurs or when he started or whatever it is - and we have need to know these things to help.

  I hope this helps.  Please answer the questions above before repair in case we discover another possible cause that can avoid this need.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• iTunes 12.3.3.17 crashes after playing the song for about 30 seconds

  Hello!

  I have a problem, I'm fighting currently to solve - iTunes 12.3.3.17 iTunes crashes after playing the song for about 30 seconds.

  I already tried things:

  (1) the preferences removed from the library, so that they can be recreated - did not work;

  (2) reinstalled iTunes - not worked;

  (3) removed freshly installed Bitdefender Antivirus for Mac - did not help.

  Product: Macbook Air

  OS X El Capitan

  I receive the following information in the log file

  ===============================================================

  Crashed thread: queue main iTunes shipping 0: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000011

  Note the exception: EXC_CORPSE_NOTIFY

  Can you help me please?

  elina_j,

  It seems that your iTunes software seems to be stop unexpectedly when you play the music back after about 30 seconds or more. First, I would check to see if there are errors on the disc that need repair:

  Disk utility (El Capitan): a disc repair

  Once the repair and verification done go ahead and test the issue again. If that fixes it, then great! If this is not the case, however, I would then remove third-party plug-ins that may interfere with the operation of iTunes:

  Test with iTunes plug-ins removed.

  • Quit iTunes.
  • Mac OS X:
    • ~/Library/iTunes/iTunes Plug-ins(The "~" represents your home folder)
    • /Library/iTunes/iTunes Plug-ins
  • If all the files in this folder, move it to the desktop temporarily.
  • Open iTunes and test to see if the problem is resolved. If so, you can leave these plug-ins removed iTunes. If you want to reuse these iTunes plug-ins, check with the supplier of iTunes plug-ins to see if updates are available.

  From: iTunes: may crash when you plug in the iPhone, iPad or iPod touch

  If the problem is still there after removing the plugins or there is none to remove, then you must then create a new library, add content to it and see if the problem persists it:

  Open a different iTunes library file or create a

  Mac

  1. If iTunes is running, quit iTunes.
  2. Hold down the Option key when you open iTunes.
  3. You will see a message that says choose iTunes library. Depending on what you want to do, choose Create or choose library.
     

  Now if the problem is still not resolved then you can create a new user admin on your computer and test it there too well?

  OS X El Capitan: set up users on your Mac.

  Add a user

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on the button Add below the list of users.

  4. On the pop-up menu click new account, and then choose a user type.

  • Administrator: An administrator can add and manage other users, install applications, and change the settings. The new user that you create when you set up your Mac is an administrator. Your Mac can have multiple administrators. You can create new ones and convert standard users to administrators. Don't set up the automatic connection to an administrator. If you do, someone could simply restart your Mac and access with administrator privileges. To secure your Mac, don't share administrator names and passwords.

• Enter a display name for the new user. An account name is automatically generated. To use a different account name, enter it now, you can't change it later.

• Enter a password for the user, and then enter again to verify. Using an index of password is recommended to help the user remember the password.

• Click on create user.

The result of the new user will determine what we then so let us know how it goes! Thank you for using communities of Apple Support.