Tecra M3: recovery error 70%

Similar Questions

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• ORA-01033 and ORA-01113: file 1 should support recovery errors

  I ORA-01033 and ORA-01113: file 1 needs media recovery errors, I tried using the Recovery Manager to without result I got after a long wait of cataloging files... is ORA-19870: ERROR READING BACKUP PIECE, ORA-19501: READ ERROR ON LINE, ORA-27070: ASYNC READ/WRITE failed, OSD-04016: ERROR QUEUING ASYNCHRONOUS IO YEAR ASKS... then... switch to the previous backup... then RMAN-00571. 00569; 03002; 06026; 9 06023: I've exhausted all the advice that I know... PLS HELP

  Start rman and connect to the database

  rman target /
  

  Once connected, run

  list backup;
  

  If you don't find listed backup, you can use the catalog command to manually add information rman backup in the rman repository
  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta008.htm

• Tecra A9 - Recovery Disc Creator does not work

  I tried to make the recovery disc for my Tecra A9.
  I managed to make the two recovery system (DVD-R) discs, but when I try to make the Applications disc I get an errormessage right after that the program wants me to verify that I put a blank disc in my DVD burner.

  _Errormessage: _

  An unexpected error caused.
  Exit this application and start it again.

  (Error code: 0E01C7-15-00000000)

  Hello

  Maybe you should try different media
  These error messages appear especially if a disc is not completely compatible

  I guess you used the same discs previously in order to create the right recovery disk, I know it's strange, but I think you should try another disc.

  See you soon

• No sound on Tecra S5, "THotkey" error starting Windows XP Home edition

  I have a laptop Tecra S5, I deleted some old programs for card readers.
  Now, sound does not work and starting the PC, windows starts and I get the message: "Error THotkey" this audio diviece is not supported.

  Is it just the audio driver what is missing and how can I reinstall it?

  Who knows, what did you do with stuff pre-installed. THotkey has nothing to do with the old programs for card readers, but it is very important tool of Toshiba.

  Did do us all first to know what is the status of the sound card in Device Manager. Sound card installed and registered correctly?

• # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

  I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

  How can I get to the lock screen?   I have tried F11 and Esc.

  BreBruce-Tampa

  Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Recovery error on the L955D-100 Satellite 00003

  Hello
  I tried the recovery procedure, but when it comes to 31% it gives error recovery 3.

  (1) what can I do?
  (2) if I change the hd will be the recovery procedure still works fine?

  Thank you

  Post edited by: mevangelista

  A question: did you create recovery media and try to install the recovery DVD or USB recovery image?

  In my opinion you shouldn't change anything. I assume that your laptop is guaranteed valid so I think you should contact Toshiba service provider and ask for help. If there is a problem with the HARD drive, you should get a new one for free.

• Boot disk for Tecra 780 recovery DVD

  Please can you help me? I have a Tecra 780DVD. I need a product recovery boot disk (Win 95) as mine is corrupted. Disc Ref T #RB - EN - 20W95.

  Hello Rodger

  If you want to have a new product recovery disc, it can be ordered by the Toshiba service partner authorized in your country. Please contact them and see if they are able to order one for you. It's a good old classic and it is also possible that the CD cannot be stopped anymore.

  Good bye

• GlobeTrotter 3 G in TECRA M2, conflict error Code 10.

  Hello

  Just installed a Globetrotter 3 + in my Tecra M2 and I got and error Code 10. Ask the dealer appears to be related with IRQ however I have not the slightest idea of what is in conflict with the card. I tried to disable most of the hardware, but the error persists.

  I'd appreciate any help on this.

  Thank you
  JOINT APPEALS BOARD

  Hey jabertolin,

  I'm not very familiar with the 3G technology, but I found this article:

  http://www.3G.co.UK/3GForum/showthread.php?t=38445

  I think it s definitely not a problem to toshiba, in order to check this forum and maybe you can get a solution to your problem.

  Good luck
  See you soon

• recovery error code: 0xe0ef0003

  When I tried to recover windows 7 recovery DVD that I created from the recovery partition, I got the error code: 0xe0ef0003 and the PC did not run windows again, so I can't start it anymore, the model is HP G62-121EE... Please help. I think that the problem is not a software problem.
  
  Thank you

  It could be other material causing the closure downwards during the test, unfortunately there is no good way to understand what it is, you may have to send in repairs or try another hard drive to see if that solves the problem.

• Drive HARD on Satellite L750-22Z recovery error

  Hello

  I tried to do HARD drive recovery. It was fine until instaliation. And after the 1% error message (1117) maybe someone knows what is a problem?

  How do I recover HARD drive without errors L750-22Z?

  > How to HARD disk without errors L750-22Z recovery?
  Very interesting question. If the recovery image is ok there is no reason for the message error.

  Did you create the recovery disk?
  If so try to install the recovery image using the recovery disk.

• Satellite A305-S6992E recovery error

  I have a set of two disks of Vista SP1 disks for my A305-S6992E.

  I tried to move the HARD drive to a larger and bought a HARD drive and installed.
  I put the recovery disk and click on it to return the computer to factory settings.

  It took a lot of time, reading data from the disk, then creating files and complete the installation.
  Restart the computer, I get the little scroll bars green, while the load Vista, happens on the pretty blue-green screen, and it said "Please wait while windows continues to set up your computer...". "then I get an error dialog that says:

  + The computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. +

  I have read several forums saying to use the F8 option at startup to repair, but repair is not an option in the start menu. My choice of boot mode safe and ends with start Windows normally.

  I tried to re - run the program of recovery disks and messed with a few variations (with or without re-partitioning, verification of memory, etc.), but still, it returns to the same spot and stops with the same error.

  Any advice greatly appreciated.

  Thank you!

  Hi mate

  You said that you have upgraded the HARD drive.
  Have you noticed the same problem installing using the old HDD?
  Please check this! It would be useful to know if the new HARD drive could be the problem.

  I also recommend to check the BIOS.
  There is an option (or should be) called SATA mode. Try putting it in compatibility mode and then try to reinstall the operating system

  Good luck

• Satellite L - drive HARD recovery error

  Hello

  If someone could help? I tried to run the hard drive recovery, but he got the following error message.

  Error: F3-FF00-0006
  Unable to get the ID of the specified partition.

  If you know all the keys to enter the hard disk again pls let me know. I tried to enter the Recovery Wizard, but the system continues to operate a diagbostic or something. Ask me to insert the network cable and then also requires a boot disk and keeps current and on. I tried to restart, but it's the same...

  see you soon
  NOx

  Hi nox,

  Strange what s...
  You also have a Toshiba Recovery disk? If so, try it please. Perhaps only something is wrong with the HDD recovery procedure.

  In the worst case, it s associated with RAM or HARD disk as Akuma writes. So download these special testing tools! :)