Tecra M7-132 there voice modem?
I want to use my toshiba modem for voice calls as fixed phone by
Windows not basic program named Dialer, I was able to call, number, connected to the person, I could hear what the person says, but nobody on the other side don't have not heard me
It is the first time that I am trying to use this technology and either I have something misconfigured or modem is not allowed to make regular voice calls
(I need calls from normal phone line, it's my job, making hundreds of calls a day and who seek to speed up the process)
I do not have this old laptop Tecra but have you checked manual as well as modem description it?
Tags: Toshiba
Similar Questions
-
Satellite L750 there internal voice modem?
Satellite L750
Hello
Manual instruction speaks an internal voice modem. The L750 has this modem and if so how do I enter it? Thank you
No, the Satellite L750 doesn't support internal modem.
-
Satellite Pro 480CDT: Wave Device for Voice Modem
I reinstalled Windows 98SE on Satellite Pro 480CDT and it seems to work ok. But when I go into the Device Manager there is a yellow exclamation point in front of > Wave Device for Voice Modem<>
Do I need to install a driver for it? Could you describe or point me to it?
Thank you.
Hello
Perhaps this explanation can help you http://www.modemsite.com/56k/wave.asp
Good bye
-
I can't find driver for tecra M7 - 132 on vista x 64. Where can I get it?
Toshiba does not provide any 64-bit drivers. Or for XP for Vista. :(
If all goes well, they will change this in the future, but right now, there is nothing to do except to use drivers Vista 64 - bit of the manufacture of the chip. -
Tecra A2: Can't get modem to work
I have a Tecra A2 and I am trying to connect to the internet via the modem, but I get message errorr 633-"the modem is already in use or is not configured properly"
I looked in the device under Ports Manager, there "Communication Port (COM3)"
Under "Modems", there "Toshiba Software modem AMR (COM1)"
These two should be the same say two COM1.I tried to go on the internet some time ago and think I could then changed settings COM, but I don't remember
what I've done!Can someone help me with this issue?
Hello
Error 633 - the port is already in use or is not configured for remote access dial out.
Error 633, the problem normally comes with modem drivers, even if sometimes it's Spyware / Adware / virus on the system of the user. The problem is mainly due to the fact that there is some software that tries to connect to the Internet using your modem, not allowing is not to use your modem.I also found this page useful, which describes the different solutions:
http://www.Xtra.co.nz/help/0, 5721-2496982, 00.htmlGood luck
-
Tecra 9100: Unknow device - driver modem XP needed?
Hi guys
"Unknown" is listed in the Device Manager, I guess that's the modem because no modem is listed in the Device Manager or connections. So I downloaded the driver modem XP Toshiba Web site but does not. Then tried the XP 9000 modem driver, no joy tried 9100 2K driver, still no joy all the info I've found points to make it a Toshiba driver made so I'm stuck. Although 1 site suggests that perhaps a Scopio Agere, tried, but has always failed.
Anyone know where I can get the modem for a laptop Toshiba Tecra 9100 XP driver please?
Thank you
ScottHello
Are you sure that the modem is an unknown device at 100%?
I found this document Toshiba how to identify an unknown device:
http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htmUnfortunately, all I can suggest to check the page of the Toshiba driver drivers or you check tools and Utilities CD for the drivers.
The other possibility is to use the Toshiba Recovery CD to recover the operating system. -
Connection persistent abandonment on Tecra R10 with 3G integrated modem
It of all the day repeating abandonment of the wireless Internet on my Tecra R10 Win7-32 running.
The Wireless Manager detects the full signal all the time and the failure is repeated according to almost regular pattern each time take a minute or two and cela seams occurs only when the modem is idle and never during downloads.Does anyone have an idea?
Hello
Can you tell me where you are? What operator do you use?
You are able to test the remote connection instead of via the Wireless Manager? Same problem?Dialup Howto:
http://APS2.toshiba-tro.de/KB0/HTD9C02RX0001R01.htm -
Voice modem on Satellite A100-787 PSAANE-02Q01LAR
I tried to install a software of voicemail as an answering machine for a telephone line but noticed that my computer does not support this function.
If the hardware is missing or it is possible that the software on the modem is not installed correctly?
The driver is installed is now called: Toshiba software modem.
What is the function of driver and what is the way to solve this problem?I use WinXp SP3 on this computer.
> Hardware is missing or it is possible that the software on the modem is not installed correctly?
The lack of material?
Didn't check you the voice mail program specifications and the hardware requirements in order to use this softwareTo be honest I ve no experience using this software, but I guess that all software provides a list of the hardware requirements. Check with the developer software, or maybe you can see some details on the package
Fact is that this laptop [SATELLITE A100-787 | http://www.toshiba.eu/discontinued-products/satellite-a100-787/] takes care of international modem V.90 (V.92 ready) supporting speed: 56 Kbps to 14.4 Kbps fax and data (V.90)
-
Tecra S3 - are there opportunities to work without fan noise?
Hi, I recently bought a laptop Tecra S3. Everything is ok, but the fan is always on. When I don't do anything for 5-6 minutes the fan is down (turn off) but after a few minutes, even I leave laptop only turns on again. I should add that I put a profile of long-term electricity from the day before.
Do you see the same behavior?
I thank in advance for any replay.Hello Slowik
Try please modify the parameters for the method of cooling in electricity from the day before. Set it to the lower level. You can also set the use of the processor at the lower level. On this path CPU will not run on the limit and should produce less heat.
-
Tecra S1: Duplicator USB adsl modem connection port
Why usb adsl modem connected to the Port Replicator III works only for power and not for the link
Hello
What type of adsl do you use and what country you're from!
What laptop do you have! What kind of operating system is installed? (Recovery or clean installation of MS)
The USB port works if you do not have port replicator usw?
What other computers, do they work well with other computers?To bye chris
-
Tecra M5: Are there special precautions with the Bios upgrade?
Are there special precautions he takes while uprading BIOS. I'm just afraid because both failover system report people after the upgrade, is it true?
Hello
Of course you need a few special steps if you want to update the BIOS!
The update of the BIOS is risky! If you use the bad BIOS or bad BIOS update procedure, you may damage the motherboard or module ROM BIOS!
This is why you should always read the details of upgrading the BIOS before you start the update.Finally and above all many people update the BIOS without any reason. That s is really stupid.
In my opinion you should not update anything if you have no problems!
Therefore, never change a running system ;)You know the technical knowledge of Toshiba?
http://EU.computers.Toshiba-Europe.com-> download-> Knowledge Base & support
You will find many useful documents and also the BIOS updated Details
-
Toshiba Tecra A10 - 11 M 3 G modem
I have a Toshiba Tecra A10 - 11M and a modem 3G integrated F3507g I gave diagnoses.
Which means that "Radio attached"NO? '" Here is the picture.Is this a problem? Or wrong? To enter service? Thank you
Hello
This message indicates if the card can be connected to the internet service provider. With other words, it shows that your card is not compatible with the available provider.
So what you need to do is to contact the provider of the internet and to clarify this point.
-
I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.
Original title: I DO NOT HAVE A POSER LINE, I CAN SEND and RECEIVE a FAX by USING MY USB CANON PRINTER/FAX/COPIER AND MY INTERNAL VOICE/FAX MODEM WITH MY VERIZON USB MODEM ACCESS to the INTERNET?
The game, July 1, 2010 21:03:19 + 0000, CAPTBARRY wrote:
I AM RUNNING VISTA HOME PREM MY DEVICE MANAGER INDICATES THAT I HAVE AN INTERNAL FAX/VOICE MODEM. I'M SO CONFUSED.
Ouch! Please do not yell at us. We can hear you if you type normally,
in different cases.You have an internal fax/voice modem, but if it is not connected to
a land line, cannot you send/receive faxes like this.Your only choice is to not make use of your machine gun, but to use a web site
service to send faxes for you.Ken Blake
-
How can I improve my Tecra M7?
I have Toshiba Tecra M7-132
I would like to improve everything to implement
I want to increase the amount of RAM in my laptop but I don't know not my laptop can handle faster than the DDR2 533 memory. I have Windows XP Tablet 32 bit, I know he will take care of only 3.5 GB of RAM, but it's better than 3 GB
I also want to change the hard drive. My current car is Hitachi HTS541080G9SA00 80 GB, 5400 rpm SATA. It will work with a bigger hard drive with speed 7200 RPM?
I have installed all the latest official drivers and BIOS
I can improve
Hello
According to the specifications of the Tecra M7-132 on page of Toshiba, it supports up to 4 GB of RAM, but all the support OS 32-bit only up to 3.2 GB of RAM and Windows XP, 2 GB is more than enough because it doesn t need to the ability of a lot of RAM.
The specification for the RAM is DDR2-667.With regard to the HARD drive: most large drives are no problem because there is no limit of capacity on SATA interface. This means that you can also install HDD 500 GB or more. It is only important that you buy a 2.5 HARD drive SATA interface.
Also, 7200 RPM should t be a problem but they are creating more heat and need more battery power. 5400 RPM are usually enough and quieter. -
Satellite L650 - Modem always stall
We have a portable L650 with built in modem software, which is used for the dial-up Internet access.
It is to always disconnect the phone line online and is a real pain to use.
The previous desktop PC, we used had an external modem and give up never once again 8 years of use.Line quality seems good without clicks or pop obvious. There is also a telephone and a response system wireless connected to the same line.
The previous external modem could connect only to 33 k maximum but it wasn't because of the quality of the line, this is because the phone is a pair gain system that apparently somewhat limited bandwidth.I tried to plug the old external modem (Banksia 56 K MyModem) via a USB-serial cable to the laptop but this introduces more problems, he also continues to win! Seems like it is just too old to 10 years or more with out-of-date drivers.
This Toshiba modem appears extremely sensitive. There are modem strings which could be sent before the composition which can help?
Perhaps, he could be forced to a fixed 33 k connection speed?Any help would be appreciated as we crazy here!
Another external modem or a wireless connection isn't really an option, nor is to unplug the phone whenever we go online.Thank you!
Hello
> This is to always disconnect the phone line online and is a real pain to use.
The modem supports the analog connection and must be always connected to an analogue telephone line.
Never connect it line digital as an ISDN or similar!If you have established the connection to the internet, then the phone line would be busy... This is nothing unusual...
Maybe you are looking for
-
I have reset Firefox and now a radio station is playing, and I can't stop it.
I have reset Firefox and there is now an online audio that I can't stop. This station online window is not open. I tried to open the window of the station, turning on the flow (for then turn it off) and two rivers play at a time.
-
How can I remove my firefox sync account? I look forward to your reply thanks
How can I remove my firefox sync account? I look forward to your reply thanks
-
How can I disable Firefox to save the password
-
Obtaining object with GObject Refnum values
Hi all I'm trying to produce an XML file that contains all the information objects (controls and indicators). I have a chart of all the GObject Refnums using the Node property, but I need to get items out of these references. Anyone have an idea how
-
How can I create a LabView driver with vi existing driver?
I am trying to create a driver for LabView 1553. I received the previously created driver files LabView 1553 of the manufacturer. I also used tools-> Instrumentation-> create an Instrument pilot project to start a new project. I used a new model and