Tecra M9: 54mps transfer rate using WLan N standard

Similar Questions

• Poor transfer rate using Converter standalone 5.0 compared to the 4.3

  I recently started using the Converter new version 5.0.0.  I did successfully more than 30 years of P2V Windows 2003 systems using version 4.3.  Immediately, I noticed two problems:

  (1) the average transfer rate went from about 100 MB/s to between 0.8 and 2 MB/s.

  (2) the process has systematically failed after completion of the c: cloning and start on the D: drive.

  I tried this on 5 different physical servers, ranging from 5 different servers host VMware ESXi 4.1 and the result was always the same.  I assumed it was a network problem or firewall and sent on a 'wild goose chase' network team for 2 days.  After that they were convinced that the physical machine being P2V was simply not sent sufficient packages, I went back and re-installed version 4.3 and restarted the P2V transfer.  This time, I received a transfer rate average of 100 Mbps (50 x faster) and the whole process completed successfully.

  Has anyone else seen a similar problem?  No possible explanation?

  The file you have to change is converter - Worker.Xml. It should be located under folder "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone". You should find the useSsl under the nfc subkey value in Config key. If not present, you can add this value as follows:

  ...

  fake

  ...

  ...

  Save the configuration file and restart the worker VMware vCenter Converter Standalone service.

• Satellite L670-1KZ - 3 TB external hard drive use - transfer rate.

  Hello world

  This thread is a complement of my previous thread on 'Partition for 3 TB HD'.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67275

  As I said previously, I managed to merge the partition into one and I started the backup copy my blu - ray on my 3 TB, HD HD (usb / e-sata and e-sata / usb), my laptop HD (e-sata).

  For your info, when you get to 2 TB (30 MB/s HD to HD and 50 MB/s laptop HD on average up to 2 TB),
  the transfer rate is slowing down in hydro-huileuses, I now have around 10-15 MB/s average, of both laptop HD HD HD (now more than 10 to 15).

  Fortunately, this will affect only around, 740 GB remainning to fill, but it's really annoying over time.

  If someone can get a better transfer rate, please let me know (even on another laptop) your configuration.

  This cursed 3 TB HD is very good for the ability, but a hell to answer when you use HD HD! I can't imagine for 4 TB HD.

  I wonder what may be the transfer speed using usb3 since portable HD... And why he is so slow...

  Guillaume

  Oh, also, I forgot, I had a problem using this Storeva SilverDock U3 with the seagate 3 TB 7200 rpm on my laptop.

  1. it is impossible to disconnect using the safe disconnection. Whenever I switch on my laptop before off the dock. Never know that I won't take the risk to turn it off when it is connected to my laptop.

  2. when using this dock + my Antec MX-1 external box with inside 2 TB HD, I have some problems shooting with my files on the windows 'Explorer', the icon disappears, the image cannot be propely display (.jpg files).

  Maybe a video card problem or a problem of electricity? I say what I'm going to fill this 3 TB as soon as possible and never plug it back to my laptop.

  And, FYI, this dock + this HD is compatible with the H1 of Dune, the loading times are slightly longer than with a 2 to, used as internal or external on the Dune, maybe + 3/5 sec.

  I bought a 7200 RPM, but everyone knows that the 7200 are prohibited for dune used as internal, M1
  must use only 5400 RPM.

  I could make a Bernard for the temperature later and keep posted yu.

  Link to the docking station + HD Ref:
  Free HD 590 GB remaining: a single file of 33 GB = 1 H @ 13 >< 18mo/s="" (dock="" e-sata="" to="" hd="">

  + The message was edited: link removed - commercial websites not allowed.

• Transfer rate between ESXi host using "Veem backup and FastSCP".

  Hi all

  I have two ESXi host connected with Eth - 1 G ports on an HP switch

  now I'm trying to transfer data between two hosts using "Veem backup and FastSCP" tool

  a 1 MB/s transfer rate is normal? you know a way to improve the performance of the network?

  Note that no collision or inadequacy not discovered on the way to the switch

  Thanks in advance

  Hello

  This work is a line perhaps? If you use VMFS as target, you must double check the block size, if it is the default 1 MB, the maximum size of a vmdk disk is 256 GB.

  The value you got 274878668800 bytes, divided three times by 1024, gives you exactly 256.0007095336914 GB. This is probably the problem.

  PS: I saw your error screencap you come to Italy, visit us on the pages of Italian user :-) group

  Kind regards

  Luca.

  --
  Luca Dell'Oca
  http://www.vuemuer.it
  [reward points for a useful answer is a way of saying thanks]

• Tecra M4: How to replace the WLAN card

  Hello
  I have a Tecra M4 laptop and want to upgrade my wireless card, is this possible without opening the whole case?
  Most of the NB I know have these cards below the keyboard, or behind a clean cover accessible from the rear. Tried both, found nothing.

  Thanks in advance

  Florian

  Hello Florian

  I fear that you will not be able to Exchange only WLAN card. The WIFI card on this laptop model is placed on site so stupid and laptop must be disassembled. Please be careful if you want to do this alone.

  To be honest you shouldn't do this without maintenance manuals. One small mistake and you can damage the sensitive plastic components inside your laptop.

  Furthermore, this model Tecra a pretty good and quick WLAN card. G standard, if I remember well. I have the same card on my Tecra and data transfer is OK.

  What WLAN card you want to use now?

• What is the interface transfer rate ata in hp Pavilion g4-1117dx

  I'm looking to replace the hard drive for my hp Pavilion 1117dx g4 with an ssd. I would like to know if the existing hard drive interface comes out with a transfer rate of 6G ssd? Thank you

  Hello

  SATA III (or 3) is backward compatible. No problem at all. But if you want to know, you can check yourself by using the following small program (look for the disk controller):

  http://www.cpuid.com/downloads/PC-Wizard/2014.2.13-Setup.exe

  Kind regards.

• Satellite M40X-149: cannot use WLAN to internet connection

  Hi, does anyone have an idea why I can only connect to the internet using my ethernet cable and not the built in wirelless ability of this laptop? If I check the status on the connections Ethernet network that I still have packages sent and received, when I try the road wirless I get only packets sent and received zero. My other laptops do not have the same problem with the same router in the same room.

  Regards, Paul
  [email protected]

  Hi Paul

  In my opinion, you should first of all control the functionality of your wireless adapter. If you are able to see your local WLAN card works properly. In this case this problem may be due to wrong settings.

  Do you use WLAN WXP parameters or a WIFI client?

• Satellite L500-19Z - cannot use WLan because the driver has been removed

  I accidentally uninstalled REALTEK WLAN driver and now I can't use the wireless installation.
  I tried to use system restore to recover before the uninstall, but the system restore won't restore (tells me that anti-virus prevents it probably, but I stopped my loading anti-virus, so this isn't the problem).

  I then allowed Windows 7 to find the material and it re-installed the driver, but I still can't use WLAN.
  Anyone got advice to help me get out of the mess I made for myself?

  Hello

  To my knowledge, this laptop supports the Realtek RTL8191SE WLan card 802.11bgn.
  You can find the Wlan driver here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  I think that it shouldn't be a big problem to get this working again ;)

  Good bye

• Acer Aspire E5-521-85EX does support up to 3 or 6 Gbit/s transfer rate for HARD drive?

  I would like to install an SSD that supports 6-gb/s data transfer rates, but this laptop support it?

  You are right.

  For your laptop computer, the interface of the original HARD disk speed is 6 Gbps (WD WD10JPVX).

• USB 2.0 data transfer rate is very slow in Windows XP computer.

  Original title: USB 2.0 work very slow

  USB 2.0 data transfer rate is very slow, what should I do?

  Hi MahendraSoni,

  1A USB 2.0 works much earlier?

  2. don't you make changes on your computer before this problem?

  There is a fix for this problem. You can contact Microsoft Customer Service & provide article kb 908673, which contains the fix.

  Hope the helps of information.

• HP Elitebook 8570p - Windows XP USB very slow and the transfer rate performance issues.

  Hello. I was wondering if anyone else knows some performance issues with the HP Elitebook 8570p and Windows XP Pro - SP3.

  I get a VERY slow start, general poor performance (waiting time when opening files and programs).

  I asked to burn in tests that show that everything is good.

  USB transfer rates are VERY slow (tried all ports of a Seagate FreeAgent USB drive, which works fine on other laptops etc.) for example a 30-minute transfer a 7gig single file of the USB HD on the desktop. Only 3 minutes to do the same on another laptop.

  I think there are problems with the drivers, like Windows 7 works very well and does boot from a bootable USB.

  USB transfer rate are also good when starting from a Windows boot environment.

  I installed HP SoftPaq Download Manager, and all the drivers are up to date.

  Hello:

  I think outside of the box here... Select the Intel (r) 7 Series Chipset Family SATA AHCI Controller instead.

  If it does not, I raise the white flag.

  Paul

• is my disk file transfer rate normal hard drive or it got slower?

  is my normal file transfer rate or he got more slowly for my hard drive? I fell my knee on my computer by hearing a scratching sound and comments, it could be the hard drive since its a thing that goes. When I copy large files like 4 GB + from one folder to another transfer rate starts at about 100 MB/s then drop down to and remains at about 50 to 30 MB per second. I never pay attention to my transfer speed and do not know if this is how she got more slow? It is the internal hard drive for my desktop specs below

  record to hard drive:

  Manufacturer - Western Digital
  B21 - WD6400AAKS
  Capacity - 640GB
  Interface - SATA 3 Gb/s
  Cache - 16 MB
  RPM - 7200
  Form factor - 3.5 "

  I agree with MightyMiro_WD

  This kind of behavior is completely normal.  I doubt that you have something wrong.

  Keep in mind that the transfer rate is a snapshot at a point in time.  They always communicating more rapid at the beginning of a transfer.  If it's a smaller file, you would not see that drop down.

• How do you speed up 5.8 to 7.2 disk data transfer rate?

  In my rateing of expieriance of windows, all my scores void are 7.2 and 7.5, except my disk data transfer rate is 5.8. I would like to know what I do for all my partitions of sup of 7.2 to 7.5. Could someone tell me the secret to do that? Your answers will be greatly appreciated!

  Thank you.

  Fred

  On Thu, 20 Sep 2012 17:50:11 + 0000, FredKoerner wrote:

  In my rateing of expieriance of windows, all my scores void are 7.2 and 7.5, except my disk data transfer rate is 5.8. I would like to know what I do for all my partitions of sup of 7.2 to 7.5. Could someone tell me the secret to do that? Your answers will be greatly appreciated!

  Replace your hard drive by a faster, for example with an SSD.

  But in my opinion, you should ignore completely all windows
  Results of the experiment. They are just numbers; they are very
  mislead and I wish that Microsoft has never included in
  Windows. You must judge for yourself what your performance is,
  and take steps to improve performance (purchase of quality components)
  only if you find that your performance is unacceptable.
  Ken Blake, Microsoft MVP

• transfer rate what is data from disk

  When I check my note to my computer, I notice that disk data transfer rate is the smallest number. Could someone tell me what this means and how I improve it. Thank you

  Hi June,

  Without making too detailed, its basically the speed at which your hard drive ("disc") reads and writes ("transfer") data bits ("rate") between different parts of the hard drive and the central memory.

  Short of a change of equipment, that is, change or replace the classic hard drive (HDD) by a unit of the solid state (SSD), nothing much you can do. Its totally a hardware related issue, and there is nothing software can do the actual transfer rate; It's a built-in to every reader of all limit which the (physical) hard drive controller is capable of doing.

  Let me know if this helps you.

  Kind regards

  BearPup

• When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  When I transfer files from my hard drive on a USB flash drive, the transfer rate is very slow, about 250 KB / second. Is it possible to increase the speed of transfer rate

  depends on the speed, support USB 2.0, USB 2.0 ports, and with active BIOS settings

  (2) you can increase the speed, if your motherbaord has a USB 3.0 port and must be enabled in the BIOS