Tecra S5 - 13N - wrong memory speed

Similar Questions

• Tecra 8100: the wrong processor speed?

  I just bought a Tecra 8100 opportunity and told me the cpu speed to 800 MHz. This excerpt with the technical spec that I downloaded form the Support from Toshiba site.

  However, there is a program called Belarc advisor installed that the cpu is a P3 252 MHz. Windows XP system also P111 252 Mhz properties.

  Can someone advise n the correct speed?
  Thanx
  Mike Davies

  Right-click on my computer, go to properties. At the bottom of the first page must list the CPU speed and ram installed. Everything that is written there what is installed in the computer at that time here.

• U350 (Intel SU2300) memory speed question

  Hi all

  I was wondering, is there a way to increase the speed of the memory in u350?

  Module of memory in my u350 is Hyundai ddr3 rated at 533 mhz (1066 mhz ddr) but it works

  by default, only 400 mhz (800 mhz ddr).

  Supports the module memory, chipset (Intel GS45 almost certainly supports it) I do not have

  See a reason why ram should run at low speed and then he pointed to work to...

  is cpu maybe limit it?

  TNX for the answer

  To exy s initial question:

  "Supports the module memory, chipset (Intel GS45 supports almost certainly it) I do not have.

  See a reason why ram should run at low speed and then he pointed to work to... »

  Modules are designed to operate at different speeds.

  The processor and chipset are designed for low power usage.

  Memory speed is equal to the lowest energy consumption. (And more strict timings of memory)

  Looks like a good choice for me, FSB/MEM = 1 / 2 = 800/400

  Most of the laptops I've seen opt for low mem speed and better timings.

  (6 6-6-18 vs 7-7-7-20 for example)

  And not a very noticeable difference in performance, IMO.

  But looks like a design for low power usage decision.

  I'd be willing to bet that you get very good battery life.

• Tecra W50 - Has R/W - speed and performance

  Hi, received the new Tecra W50 - a and have to say I'm gutted with the speed and performance.

  8.1 we partitioned the drive 50-50 and the reading/writing is terrible. If I copy from C: to D: I lucky to get 10 Mbps

  Copy from or to external Sata I get more of 50mbps and around the same by ethernet.

  I got rid of the partition and tried to copy locally and get the same result.

  The Task Manager displays disk to 100% performance all the time and I can't do with my machine while copying going on.

  Copied 2gig file 1 and it happens in seconds. Try a folder with a few thousand of files and everything grinds to stop.

  Any ideas greatly appreciated

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  Thank you

  Lee

  Type of drive is MQ01ABD100H 1 TB and I have 3 machines to do the same thing

  There is an SSHD (SSD hybrid drive) a combination of SSD and HDD.
  SSHD performance depends on the cache controller (SSD).
  Why?
  The flash cache is used for the most used data... the special controller must decide what data will be loaded into the cache.
  But the SSHD needs some time to 'learn' data that uses the cache and the write speed at the beginning would be similar to the common HARD disk.
  After some time this performance will increase and the SSHD should reach the higher writing speed.

• Tecra M9 - compatibility of memory resources

  Hello

  I really apreciate if someone having a Tecra M9 (S5515X or S5513X), check the memory resources in the control panel. And inform me which appear on the Device Manager.

  Please, go to control panel / system / hardware / device manager
  Menu display / resources by type / memory.

  Appearing something like this

  [000 A 0000 - 000BFFFF]-...
  [000 A 0000 - 000BFFFF]-...
  [000CC000 - 000CFFFF]-...
  [000DC000 - 000DFFFF]-...

  I need the description of memory occupancy for the Bank 000D 0000 to 000DFFFF.

  I need this information to verify the compatibility with my card PCMCIA for Siemens, which can only work if the 000Dxxxxx of the Bank of memory is not used for another device. I need to check this allow to purchase the Tecra M9.

  Best regards

  Heitor.

  Hello

  I can't provide you with any information on memory usage because I am not owner Tecra M9. But I found on the internet of information on the card slot PC of Tecra M9.

  The Type II 5mm PC card slot can accommodate unique Type II 16-bit or 32-bit (CardBus) PC cards.
  So if your Siemens card is compatible with the specifications of this material I see no reason why he shouldn't? t works with the laptop Tecra M9.

  Greetings

• Tecra S1, cannot stop / memory dump blue screen physical

  Hi all

  I really have a serous problem with my laptop TOSHIBA Tecra S1 series.

  I can NOT stop, she gives discharge and it restarts (bule screen) memory physics.
  Whenever I restart, it gives discharge and it restarts (bule screen) memory physics.

  In both cases when windows start it give the message that:

  Your system has been recovering from a mistake of the serosaand it give more details

  If you need a snapshot, please send me email.

  The system that I use:
  Windows XP - SP2 Professional

  This problem came once I installed the software my company's VPN .
  I tried this software in the laptop TOSHIBA TWO and he gets this problem, I also tried to install the software on other systems and the two systems are very good and they work properly.

  Can someone help me, this problem is really annoying me. If you need the VPN software my company gave me please send an email and I'll send it to you.

  My email: [email protected]
  [email protected]
  [email protected]

  I really appreciate your quick answer to the problem.

  Thank you
  AR

  [Edited by: admin]

  Hello

  Is what VPN Client this?

  It seems that the OEM operating system do not like the VPN Client. The problem could be that Toshiba has designed its restoration in a small way differently OEM CD or some utilities occure the problem because each 'designated' its own Windows OEM manufacturer.

  There are built-in drivers, tools and software. But normally the Toshiba and the other manufacturers don't change something in the operating system. So I think that there is a software problem.

  In my opinion, I want to uninstall programs in different turn that may occure the problem.

  Chris

• Tecra A10 with wrong source IP address ping responses

  Hello!

  I have problems with my network connection.

  After installing Win7 pro answers tecra A10 ping on the lan with 192.168.0.239 port, but he 192.168.211.36 the DHCP server.
  In Wireshark on tecra A10 I don't see demand for IGMP but no answer.

  On the other PC the answer comes a false IP (and of course a wrong MAC).
  If I disconnect the lan cable a stop responses.
  If I boot in Linux, everything's fine.

  So what software changes IP address?
  I see no answer in wireshark, I think it might be something around the network card.
  Internet is OK, but I can't do any remote.

  Someone at - it an idea?

  If your problem is the remote control only, right?

  If I understand right you don t use original Toshiba recovery image so no one here Don t know exactly what have you installed and you do exactly.
  If your LAN/WLAN card working properly and you can connect to your router, this proves that there is no hardware problem.

  Have you tried the same thing with the original preinstalled recovery image?

• Satellite P25-s607: max memory speed

  I plan to upgrade my memory to the phone of p25-s607, he saya in the spec that the memory is ddr 266
  someone told me that the chipset is 885 pe so the card mother shoud suport up to 400 mhz,
  is it so? and if I put it ddr 333 (or 400) going to work at these speeds?

  Hello

  The chipset is Intel 865PE and ICH5 with data/address Bus width; 64-bit / 32-bit
  In addition, this device was shipped with 512 MB of DDR SDRAM and you expand to 2048 MB
  Memory expansion: 128, 256, 512, 1024 MB, 2.5V, SODIMM, DDR PC2100 SDRAM

  Unfortunately I have not found information on the memory clock speed, but as far as I know, you can use these Kingston modules:
  Kingston KTT3614/128 128 MB of memory
  Memory of 256 MB Kingston KTT3614/256
  KTT3614/512 Kingston 512 MB of memory
  Memory module 1 GB Kingston KTT3614 / 1 G

• Satellite Pro A100 - 828 Max memory speed

  Hello

  Can someone please tell me the max speed of memory for Satellite Pro A100-828, I'm wanting to move to the 4 GB maximum but is some sites say the maximum speed is 533 MHz while others say to 667 MHz. For example, the Toshiba site lists only memory 533 MHz under the "Compatible" Options yet other sites list 667 MHz memory as compatible.

  Thanks for your help.

  Hello

  You should check which bus (FSB) front would support.
  Install the hardware diagnostic tool like Everest home edition, and you should be able to find this value.

  If your chipset would support 667 Mhz then you can use these modules and the modules would go with 667 Mhz too.

• Tecra A8 - no CPU max speed under the "full power" profile of PowerSaver

  Hello world

  My Tecra A8-S8514 (Core 2 Duo T7200 @ 2 GHz) has this problem: when I put the PowerSaver profile to 'Full Power' of the CPU sets his speed at 1.4 GHz.
  My company has purchased 2 of the A8 and testing has been replicated in the second laptop, which leads me to believe that there is a bug with the PowerSaver application instead of a faulty hardware.

  The Toshiba helpline ignore the fact that the 2 laptops have the same problem, insisted that I should do a system restore and it does not solve the problem so take it to a service center. There was no way 'experts' would admit the application could be evil and submit an application for the programmers so that they can test and engineer a fix.

  Please someone else with a Tecra A8-S8514 can test this? I used the utility Intel Processor and a free benchmark called GeekBench.

  Thanks in advance!

  Hello

  I don t think that the Toshiba Power saver is defective.
  To my knowledge, these tools are tested a lot of time and should work fine.

  In your case, I recommend to check settings in the Toshiba HWSetup.
  You'll find the CPU tab.

  There, you should check if the frequency of the processor dynamic Mode is set to high or dynamically switch able or always low. These settings may have an influence on the speed of the CPU.

  Best regards

• Tecra A8: can what memory I use?

  Hi all
  I bought a Tecra A8 with 1 GB of memory and I want to upgrade to 4 GB, but I do not know what type of memory to ask.
  My machine is labeled MODEL No.. PTA83E-08T04E... but when I go to providers, web sites, I have to choose between the models A8-103, A8-104...
  On the Toshiba site I don't see the appropriate response
  Can anyone help?

  Christian (France)

  Hello

  You have a Tecra A8 PTA83E with processor Intel Core 2 Duo T7200 (2.0 GHz) processor and Intel 945GMS + Intel 82801GBM chipset?
  Then maybe this page could clarify a few issues:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=24210&ft=m&St=3

  You must use DDR2 memory modules 667 MHz (PC2-5300).

  You can also use this module:

  -2 GB DDR2 - 667 PA3513U-1M2G
  -1 GB DDR2-667 PA3512U-1M1G
  -512 MB DDR2 - 667 PA3511U - 1 M 51
  -256 MB DDR-2-667 PA3499-U - 1 M 25

  Best regards

• Tecra A9 - controller card memory under Windows XP?

  Hello, I have a new Tecra A9 - 51G. I've had to downgrade Vista to XP Professional and evrything works fine, but Windows cannot find memory card contorler, and I can't use 5-in-1 Bridge Media slot (compatible SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card). Please help me. I need this driver. Thank you.

  Hello

  Have you installed all the stuff including utilities SD Toshiba download page?

• Tecra M9: not enough memory to run

  Hello

  I have a problem with an application that freezes with messagebox not "enough memory for the operation".
  I repeat, the problem on 7 different model laptop Tecra M9 with configuration: 1024 + 1024 MB RAM with Nvidia NVS130M.

  I tried to change the virtual with ratio 1.5 * ram, 2 * ram memory... and even without virtual memory... every time the same result, when the memory used by file (visible in the Manager of tasks bargraph) occupies about 1.30 GB, the message box appears an application stopped.
  I did a disk defragmentation, checked the Ram, tried the 3 G option in boot.ini, no way.

  Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  I don't think it is the right solution for 'downgrade' the size of Ram, if someone already has this kind of problem?

  Thank you in advance

  Hello

  > Finally, 'just to be sure', I took 1 Bank of Ram of the laptop, and then, with only 1024 MB of Ram, the problem goes away, the Task Manager indicates a value stabilized to used memory (a bit more then 1 GB).

  Hmmm, check if you can run Notepad with another RAM module removed.
  I'm not quite sure but it is possible to m the error could be related to a dysfunction of the RAM.

• Tecra M2: can what memory I use?

  Dear Sir.
  I posted a question previously about upgrading a laptop computer with more memory: when I check the toshiba site, they offer different types of modules to upgrade for a tecra M2: as 1024 MB PC 2700 PA 3313U-2M1G.
  But for 512 MB, they offer two types of memory: one is PC 2700 PA 3312U - 2M 51 and also another, which I think in my opinion is faster: PC 2-4300 DDR2 (!) PA 3412U - 2M 51:
  What of the latter: it is suitable for tecra m2? (because I want to order it online and place the module on mine)

  Thanks in advance
  Dr. Weekx R

  Hello

  Well, I found information that you can use this memory module:
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  PA3313U-1M1G is 1024MB DDR 333 MHz SODIMM / Specifications: PC2700

  Please also check this other forum posting:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6689&MessageID=23117

• Tecra 8000: questions about memory, mouse and screen

  Hi, im using a tecra 8200, mouse keeps drifting upward left after 30 minutes? keyboard problem?
  Sometimes the screen displays changr, from very dark then normal?
  Finally I was told that I can put in a module of 512 mem alongside 256 existing will this work.
  Thanks for any reply Biffo

  Hello

  As you know on this path it is not easy to give you a good answer on all these problems. The same happen to me with my mouse, but AFAIK it's normal because the mouse must obviously be calibrated again and again.

  Daniel is right about the memory. You can use two modules with 256 MB (PC100 256 MB - PA3069U - 1 M 25). 512 MB should be max according to the specifications of this unit.

  Good bye