Tecra S1, Hibernation and power

Similar Questions

• How to remove the front rear of the Tecra S1 PT831A to check cable and power?

  Hello

  I need to "check the cables and power," following the Seatools for test back and start-up message 'failure to support, check cable PXE - E61'. I also have a message for the CHKDSK using the XP Pro CD, saying after 26% that "the volumn appears to contain one or more unrecoverable problems".

  Remove all screws B6 or what else - to remove the back cover for "check cable"?

  Startup by default, without failure, then to BSOD Mode screen whatever the choice is taken, the BSOD is too short a period to read the message, and there is no option in the choice of Safe Mode to disable "Restart in case of failure".

  I removed and reinserted the RAM and HARD drive without change to issue.

  Hope this makes sense and someone can give advice.

  Concerning

  Wagga

  Hello

  Each laptop has in the list of all bootable devices BIOS. If none of them can be used the last of them, LAN port, is checked, and then you'll see this message PXE - E61.
  If the problem may be your HARD drive.

  First check HARD drive. Enter the BIOS and set it to default settings. Restart the laptop and check if the HARD drive is recognized and registered properly in the BIOS settings. If so he has no problem with connectors.

  I recommend get you the new HARD drive for testing purposes. Put the new HARD drive and try to install the OS by using the original Toshiba recovery disc.
  Please post comments.

• Satellite A30 hibernation and activation problems

  Hello

  I got my PC toshiba laptop satellite A30 for 14 months now and have had no major problems so far. whenever I have disable my laptop or put it into hibernation, it restart normally the next time I use it, it is just like if it starts, then stops and turns off by itself and will be repeated again and again until I have remove the power cable and remove the battery, then put it back in and restart, and then it is normally.

  I checked and remove all viruses on my hard drive, but this issue concerns me.

  does anyone have an idea why this is happening?

  Thank you

  Hello

  have you tried to reinstall the Toshiba Power Saver again?

  One of my friends has also had problems of hibernation, and he relocated the energy saver!
  We dicussed on this subject and it may be that the hibernation file is damaged and must be obtained from new!

  To bye chris

• Put into hibernation, and then restart the two computer sending to a complete stop

  Totally out of the Blue yesterday (20 December 2010) my laptop running XP Pro SP3 with full updates developed a need where Hibernate (via the shutdown menu and pressing the on/off switch) sends the computer to a complete stop after briefly posting the 'Preparing to Hibernate' screen but is progressing not not to the Windows XP screen. Similarly, Restart completely shuts down the computer and does not restart automatically.  I checked, disarmed and reset the settings to the hibernation effect power management.  Any ideas?

  For aand Stand By issues of hibernation, I always start with video dirvers.

  Can you think of changes in the field of video drivers since finally things worked?

  So far, all we know is that you have a laptop computer with Service Pack 3.

  It is good that you have SP3, because there were some problems with Hibernate and Stand By fixed in SP3.  You can read about them here:

  http://support.Microsoft.com/kb/946480

  If you want to see what you have now, or if you have problems later, follow these steps:

  Usually and easy to check and correct, is the video drivers for your system that must be downloaded to your global manufacturers Web site. Download the correct (recent) video drivers for your graphics card, install the correct video drivers, reboot your system, and then test.

  If you can not know how to check if your video drivers are correct, may not know how to get to the World Wide Web of manufacturers or can not know what to do then, maybe we can look at it for you if you provide more information.

  What is your system brand and model?

  If you are not sure what you have, or need another set of eyeballs on it, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete it.

  This minimize back Q & A and eliminate guesswork, trying things and assumptions.

  Do, or do not. There is no test.

  Someone please tell me how to make figgy pudding like these kids keep saying they won't until they get some.

  I decided to implement the points for a new puppy instead of a pony!

• Hibernation and Eve does not!

  Don s. says:
  : Hi
  : I have just install Office 2007 and Outlook
  : Connector.  It took me about 2 weeks to set "switches".
  : the settings I want, updated or imported by personal folders,
  : Contacts, etc.
  ::
  : Now I find that my sleep on the keyboard button not working,
  : - the start/stop only gives me two options and restart -.
  : with the sleep button dimmed.
  ::
  : I went for the power settings in the Control Panel, as well as
  : Display Power Options, but no luck there either.
  ::
  : I do no like to leave my PC all the time and I don't like
  : stop it because it takes a long time to restart.
  ::
  : How to get back my hibernation and the day before?
  ::
  : Help
  ::
  : Thank you
  ::
  : Don S.

  Hi, did you add a new device to your pc, you may have a missing driver.

  Go to the heart Control Panel and start the Device Manager and see if there are any exclamation point, if they are a driver missing. Once you add each of them that the day before should illuminate again. Follow these steps to open it, fast.

  1. Click on Start and then run.

  2. Type the following command in the Open: area of text and then hit the Enter key or click the OK button.

     devmgmt.msc

     Device Manager displays immediately.

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• Qosmio X X 770-11 - new motherboard and power supply for sale

  Brand new motherboard and power supply for sale

  Posted by jtk
  

  Brand new motherboard and power supply for sale

  Also Intel® Core i7-2670QM CPU
  4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
  1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
  Jim Kerr sent from my iPad

• Satellite A210-1AP - battery and power supply problem

  A few weeks ago I received my laptop (Satellite A210) reapair and the motherboard was changed.

  Since then, I got problem with the battery when it is inside and power cable is pluged.
  When the cable is in the laptop running on battery power I do not know why. Then when I turn it off battery led is lit Orange and the battery is charging.
  When the PC is turned on, the indicator light does not work and the battery becomes lower.

  So I wonder what the problem is.
  I read somewhere that this problem could solve the BIOS update.
  So anyone have experience like this.
  Also how is installed BIOS, I saw there is an installer for windows (so I guess it isn't hard).

  And somehow can back up old BIOS so I can go back if something bad happens.

  > A few weeks I got my laptop (Satellite A210) reapair and the motherboard was changed.
  > Since then, I had problem with the battery when it is inside and power cable is pluged.

  In my opinion, the technician has done something wrong
  The point is that this problem occurs after the exchange of motherboard and I think what this is about.

  Contact the ASP who repaired the laptop and explain your problem.
  I doubt that a BIOS update would solve this problem. I think it s a question an electrician

• Equium L10-273 kept switching between battery and power

  Hello

  I saw a similar post here and I was wondering if anyone could tell me if they have had this problem sorted? My Equium L10-273 kept switching between battery and power all others second, which made it impossible to type, it's got worse and worse. I thought it was a problem with the power supply, but when I removed the battery from the laptop is ok running of the adapter.

  He kept also make a noise of hissing/crackling growing fan region, which stopped when I removed the AC adapter. The adapter was unusually hot, and the fan area became too hot to the touch. This stopped now, I removed the battery, so I want to know is what someone has solved this problem by replacing the battery or it should be returned?

  This laptop is less than 2 years old, but apart from his one year warranty.

  Hello

  According to the description of your problem, I think there is a problem of electronic power supply. Sorry but there is not a universal solution, and I recommend you contact the service authorized in your country. Explain the situation and see what they say.

• Looking for an AC adapter and power cord for a HP Pavilion 2 p-1105, PN:QW819AA. Parts order fiasco.

  Not my computer, but my father, apparently he has lost the power adapter and power cord before he surrendered.

  I have never had a difficult experience find a part, it's like the HP support site is this circular black hole. I understand that this isn't a standard power supply, but HP power cord... Seriously, why the specifications list and the list is not part numbers.

  Call the customer support isn't much better, was routed from the line parts store to the HP Shopping, back to the parts store channel. Each single representative that I spoke too cannot identify this part.

  a guy tried to tell me everything that I needed was a rope, according to the installation instructions, is not correct.

  At this point, I'm extremely frustrated and very unlikely never recommend or buy an HP product again.

  Here are the specifications of the desktop HP Pavilion p2-1105. According to the specifications of the computer, this model requires an external power supply with the following features;

  External 90W power supply (100V-240V)

  Total wattage: 90W

  Input voltage:

  100-127V/3A (50-60 Hz)

  200-240 v/2A (50-60 Hz)

  Output voltage: 19V

  Based on the HP part Surfer parts list for the product number: QW819AA - model name: desktop HP PAVILION P2 - 1105, the following seem to be what you are looking for.

  HP P/N 213349-001 - cord (black) - three sons, 3.0 m (9.8 ft) long - right taken C5 (F) (Canada and United States)
  HP P/N 619752-001 - food - Ext AC Adpt Lolonis-r RT Angle Connector 90W

  HP P/N 695835-001 - 90W square EPS (Domino) 3 p (which seems to be an alternative to the HP P/N 619752-001)

  Please send Bravo

• W500 freezes during hibernation and standby

  I have a W500 with XP Pro. Not so long ago, it started to freeze during hibernation and the day before.

  Any ideas? Thank you!

  I made a number of updates and I suspect it is the Bluetooth driver that does not allow to happen.

  It seems to be ok now.

  Thank you all for the replies!

• Replacement card wireless and power p7-1254

  1. what type and where can I find the exact same as found in the tech specs page in the link below?
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5187022&... Also, where can I find this card on the motherboard? I don't see or I could have missed it.
  
  3. Moreover, if I were to upgrade the processor, which will be I need and how to replace the CPU?
  
  4. What is the recommended CPU to run at the same power original power supplied with my computer when I first bought it?
  
  5 How can. one last thing, I upgrade and replace the graphics card if this computer comes with the integrated graphics card of base/stock/default on this computer?
  
  I'm not very tech savy, or a computer programmer/Assistant. Help, please. Thank you!

  This is the original factory specifications for your desktop HP Pavilion p7-1254. Here are the specifications of the card mother AAHD2-HY (Holly) installed on your computer.

  (1) wireless card and its location;

   

  

  (2) CPU upgrades;

  Image AMD A8-3850 (Liano) 100W
  Image AMD A8-3800 (Liano) 65W
  Image AMD A6-3650 (Liano) 100W

  No need to replace the power supply to allow an upgrade of the CPU.

  (3) graph and power upgrade;

  This computer using integrated graphics supported by the motherboard and APU. Installation of a discrete graphics card will automatically disable the integrated graphics card. This model supports a v2.0, v2.1 or card discrete graphics PCIe x 16 v3.0 Specification v2.0. For all but the most basic graphics cards, you will need to supply. I suggest using the power supply Corsair CX500, CX600, CX500M, and CX600M.

  Please see HP - addition / replacement of material and select the appropriate necessary topic for instructions.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• In the notification area, volume, network and power icons have disappeared.

  In the notification area, volume, network and power icons have disappeared. When I go into properties, in the area of system icons the same selections are grey, when I click on them that no check mark. How to make the grey selections to become black (active), so when I click on them the check marks appear?

  [Moved from comments]

  Johnny D.81 responded on November 2, 2012

  Try these steps and check if that helps:

  ** Turn it back on. Sometimes a reboot will solve this problem.* *.

  1. close all programs and stop the laptop.

  2. remove all power supplies (battery and power cord)

  3. empty the remaining power by pressing the power on button for 30 seconds (even if you have no power).

  4. put the battery back and start the computer

  5. once fully loaded, right-click on the system tray and select Properties.

  6. This will bring to the top of the "Taskbar and Start Menu Properties" dialog box. The "Notification area" tab.

  7. at the bottom of the tab, is the area 'icons systems. " There is a checkbox for "Power". "check" the box and click on apply or OK.

  Also update your graphics card drivers.

  It works! Tanks a lot Johnny D.81!

• I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024. Restart gave a different stop error message: 0 x 00000050.

  Original title: Blue screen problems - Stop 0 x 24 and 0 x 50

  I'm not being updated hardware or software on my Dell Latitude D8380.

  I ran the Windows tool to check if the laptop is suitable for upgrading to Windows 7, but did not install any software.

  I put the machine into hibernation and when I restarted, I got a blue screen with stop: 0 x 00000024 (0x001902fe, oxba4f7948, 0xba4f7644, 0xb9d31ae8) ntfs.sys address b9d31ae8 base at bpcef000, datestamp h8025be5.

  Restart gave a different stop error message: 0 x 00000050(0xffffffff,0x00000000,0xba1bef42,0x00000000) i8042prt.sys address ba1bef42 base at ba1b8000, date stamp 48025c 67.

  Please can you help. Thank you, Sue Dixon

  Hello

  Step 1: Check if you are able to boot in safe mode. If you are able to boot into safe mode, and then try to perform the clean boot to safe mode and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Run the check disk hard disk command. (You will be able to try this step if you are able to start in safe mode or in normal mode with success)

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Let us know the status of the issue.

• missing volume and power battery icon

  icon missing battery volume and power for laptop under vista, I tried the fix he suggestion

  Hello

  Try Method 1 and if it is not available, try Method 3 in the link:

  "How to activate or disable the Notification area system icons in Vista"

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can also try a system restore to before that was the problem:

  «How to make a Vista system restore»

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.