Telephone problems Wireless 2.4 GHZ WRT160N Ultra Rangeplus Wireless N Broadband Router and GE

Similar Questions

• I am running winXP home on laptop wireless via a router, and I continue to have an effect on the net.

  login procedure

  I am running winXP home on laptop wireless via a router and I continue to have an effect on the net, and a window saying I need to go through a certain procedure of connectivity in order to return on the net than what seems to come regularly and after that I went through the procedure, I'm back on the net could you please inform me how to eliminate this problem.

  Hi conorcloris,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242/en-us

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006/en-us

• Connect a printer to lan-card Wireless - G Broadband Router WRT54G2

  I just bought a Wireless-G Broadband Router WRT54G2 and it works very well with my wireless computer, but I can not connect my printer. I use the Linksys Advisor program to search for the printer, but it does not. I see that my router starts by IP 192.le xx and my printers IP is 172.xx. May this be the problem? I had no problem when the printer is connected with a router not wireless.

  Hello

  I installed the printer again and now it works. Thanks for your help.

  Frejlev

• Cisco Linksys WRT54GS Wireless-G BroadBand Router

  I recently bought a new laptop with Win7 and tried to connect it to my Wireless Linksys Wireless-G WRT54GS router, who is listed as compatible.  The problem is that the signal continues to decline; I have to keep unplugging the router and reconnect the signal.  I put in the Linksys Setup disc, a window will appear indicating that it is not compatible with this system.  Please notify.  Thank you.

  I recently bought a new laptop with Win7 and tried to connect it to my Wireless Linksys Wireless-G WRT54GS router, who is listed as compatible.  The problem is that the signal continues to decline; I have to keep unplugging the router and reconnect the signal.  I put in the Linksys Setup disc, a window will appear indicating that it is not compatible with this system.  Please notify.  Thank you.

  Unless you are connected to the router via USB - the likely router isn't the issue.  There is no need of drivers for your system (Windows XP, Vista, 7;) Linux; OS X; Android; iOS...) for the router itself - only wireless computer device used to connect to ANY wireless access point.

  -Discover drivers for any wireless network is installed in your laptop that allows it to connect to wireless access points - and visit the manufacturer for drivers and software updated.

• Wireless-G Broadband Router questions

  I have a router wireless g broadband. Its model name is WRT54GL and 4 people use 2 using son him & 2 others using Wi - Fi to it. I use a wired connection to the router & for some reason any I'm deformation when I race Nascar Legends online. NASCAR Legends was released in 1999. Is there a way to get rid of this distortion issue I have? Let me know in advance. Thank you.

  Try upgrading the firmware on the router and reconfigure the router from scratch.

• Factory reset N300 WIRELESS Cable Modem Router and now can't access the internet via a browser

  I have reset my modem/router to factory reset through my laptop to try to solve a problem. Now it will not allow Internet access through browsers at all, but I can still ping via the CMD prompt

  .. After a couple of hours trying to solve this problem, I solved the problem by logging into the router... tab basically fixed IP/DNS auto and back to auto settings once again... He was somehow glitches.

• Can I use as a point of access Wireless-G broadband router?

  I use a router broadband wireless Netgear as main router to the ground floor and connected to the internet. I connected an access point wireless of LinkSys (WAP54G) as a wireless Repeater. Same SSID however, I turned wide dissemination. My office upstairs, I have wifi internet access very well and remain connected indefinitely. However, shortly after connecting to the Office VPN (off-site), the connection drops-both internet and VPN! I ran a loooong cat5 to the office on the floor and when it is connected to WAN I remains connected to two connections indefinitely. I do not have another AP, but I do not have a router Wireless G (WRT - 54G). Can I use this router as an AP, the same SSID, but I noticed on previous posts I should reactivate broadcast on all devices and change the channel settings. I noticed, when I went into the Setup utility 192.168.1.1, I access my netgear router, how to enter the Linksys router?

  Thank you

  Ken

  Nothing beats an AP on the WRT mode. It's just connecting it via the main router LAN port, you can use the access point without going through the router within the WRT component.

  You will have to do exactly what I wrote. Don't change anything on the Netgear.

  1. disconnect your network WRT. Wire a single computer to a LAN of the WRT port.

  2. open the web interface of the WRT to http://192.168.1.1/ since the computer you plugged on the WRT.

  3. on the main change WRT configuration page the LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server.

  4. save the settings. Unplug the computer.

  5. wire one of the LAN ports of the WRT to the Netgear. Do not use the internet port of the WRT!

  That's all. You don't change anything after that. It is the final configuration. You can now access the web interface Netgear http://192.168.1.1/ and the web interface WRT to http://192.168.1.2/

• Wireless-G Broadband Router with SpeedBooster WRT54GS does not work

  Hello, I need your help. I got the WRT54GS Wirelles-G and I am trying to install it, but at the end of the installation it says the system does not recognize the router, it lights up for internet and Ethernet, but it didn't recognize it.

  I have Windows Vista Home Premium and it has the latest updates, my internet provider is AT & T, but I don't know what the problem, everything goes perfectly hollow installation but in the end, nothing! Help me please.

  Thank you.

  Thank you so much sabretooth, finally working. I have a final request for help. I want to know how can I protect my signal to intruders from the internet, it is possible to configure as a user name and password to access my router? I'll appreciate your help.

  Greetings.

• HP Officejet Pro 8500 all-in-One Incompatible with D-Link Wireless N 300 Router?

  We have upgraded to a new D-Link Wireless N 300 Router and have consulted successfully the router using the key to safety with two cell phones and a desktop based ethernet but am getting an error "password WPA not valid" when you use the Wireless Setup Wizzard of the HP Officejet Pro 8500 Wireless all-in-One.  We have administrator access rights to the D-Link router using the desktop computer but not sure what to change.  We have restored factory on the 8500 and am not sure what next step to take to try to get it connected.

  New technology of security of this router is not compatible with the all-in-one series 8500 or y at - it fixation or modification which could be considered to get this connected with the new router?

  This problem has been resolved.  We 'Restored default network' in the network menu of the 8500, however, we needed "Restore Factory Defaults" in the Tools menu that solved the problem and allowed us to use the wireless configuration Wizzard correctly.

• Looking for Wireless-N Gigabit Router with VPN

  Hi all

  I recently bought the WRT310N Wireless - N Gigabit Router and I'm in love! I've updated from an old Netgear router, so now I'm enjoying performance gigabit.

  After buying my SIN, I now use VPN to connect to my NAS when I'm remote.  I started to look at installing openVPN on my NAS, but it seemed complicated and buggy, so who's got when I read that a large number of routers today include built-in VPN features.

  I searched but did not find any Wireless-N Gigabit router that also included the VPN features.  I found 10/100 routers with VPN, but not Gigabit Wireless-N.

  Linksys Wireless - N Gigabit routers with VPN integrated?  If Yes, can you tell me what model should I buy?

  In summary, I like to keep my Wireless-N Gigabit performance and (hopefullly!) the use of the VPN on the Linksys router so that I don't have to worry about the complex and buggy software VPN installs on my NAS.  How can I do this?

  Thank you!

  As far as I know model onlyh 1 that is suited to your requirement is WRVS4400N. Its a Wireless Gigabit router.

• Satellite A100-014: connection Wireless D-link router problem

  I think that it is working properly. I keep getting kicked from WLAN (connected to the dlink DWL 900AP), but if I plug the Ethernet cable it works very well.

  This vista software is a major pain. It will let me install the d-link software.

  Does anyone have any knowledge about it?

  If you need the d-link software you must ask the manufacturing of router for these updates or visit the support site for manufacturing.

  What WLan encryption are you using? I used WPA2 and I had similar problems.
  My router and the wireless network card were not 100% compatible with this encryption.

  Now I use the WPA or WEP and it works.

• Problem wireless on my HP DM4 1024tx button - it remains OFF (orange) after the installation of Windows 8 CP

  The wireless button was working normally on my HP DM4 1024TX but a few days ago, I installed Windows8 overview consumer since, then the button wireless OFF rest (orange) and no little matter how many times I press on / reboot/reinstall drivers/reinstall the operating system. Any body please help!

  After a lot of House work, I was able able to solve the problem by myself.

  The Solution is:

  1 remove the battery.

  2. remove the memory card Panel.

  3. remove the black and white wires wireless, stay for a minute and keep returning.

  4. remove the CMOS battery, stay 10 dry and keep it back.

  5. keep the Panel memory card and the battery into the slot.

  Start the laptop normally, Voila it worked

• Problems connecting to wireless G Linksys router

  I have problems with connectivity issues with my wireless router. I have a Verizon DSL modem which is wired to a Windows XP computer and the wireless router. I have a total of 3 computers wireless (1 Office XP wireless, 1 laptop Vista) and XP wireless laptop 1. For these last months, I had intermittent connection dropping issues. I tried to change the channel on the parameters 9-05:49 wireless and so on and so forth, but the only channels that work for a while are 9 and 11, but I still feel the droppings of connection. It's very frustrating and confusing especiall since the signal strength of connection seems to be good to excellent. There are moments when (very little) when the connection works very well, but 90% of the time I can't go on the internet or connect to my VPN for the job.  Any help will be appreciated. Thank you.

  Try this:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  On the Configuration tab change MTU size to 1300, then click on save settings...

  Click the settings advanced wireless

  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• Windows Vista problems wireless on laptop

  First of all thanks in advance to anyone who can help me solve this problem. It really starts to drive me crazy. I have a laptop HP under Windows Vista Home Premium SP2, I built in adapter wireless and until a year ago it was working fine. I used a public WiFi access point, and I honestly think it crashed my adapter because it has never worked since. At the time I didn't it was something important.
  I can be right next to a wireless router (at home) and a laptop shows excellent signal and my HP link see the strength... until I hit... Then he throws a "Windows cannot connect to"
  I click on diagnose the problem and told me "Wireless association failed because Windows did not receive response from the access point or wireless router.
  I am looking for the extra wireless and it shows the same thing but this time one that I want to connect to is now the low signal strength... I tried a signal booster and I have tweeked every setting I can think. I'm lost. Here is a partial of my ipconfig and my all in the event log. (btw, this is the same event log whenever I try to connect to the same wireless connection)

  I ran ipconfig/all and my share wireless is as follows:

  Windows IP configuration

  Name of the host...: laptop
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Provider of
  [Name]      Microsoft-Windows-Diagnostics-Networking
  [Guid]        {36c23e18-0e66-11d9-bbeb-505054503030}
  EventID 6100
  Version 0
  Level 4
  Task 12
  Opcode 0
  Keywords 0 x 4000000000000002
  TimeCreated
  [SystemTime] 2010-05 - 28 T 19: 47:37.970Z
  EventRecordID 110433
  Correlation
  [ActivityID]         {E3C3235D-A145-4653-96D0-4B65A10B8578}
  Execution of
  [ProcessID] 1428
  [ThreadID] 3100
  Channel system
  Laptop
  Security
  [User name] S-1-5-19
  EventData
  MSM HelperClassName RNWF helper class
  EventDescription Wireless Diagnostic Helper Class event for all the info on this session see the Wireless Diagnostic informational event.
  Helper class: Native WiFi MSM
  Initialize status: success being a diagnosis Interface login information
  GUID: 62817a68-3074-4e07-8417-4f39d20b6c9a
  Name of the interface: Atheros AR5009 802.11a/g/n
  Interface WiFi adapter type: Native
  WiFi profile: Discovery connection
  SSID: hhonors
  SSID length: 7
  Connection mode: Infra
  Security: No.
  Connect even if the network is not broadcasting: No.
  Result of diagnosis: problem found
  Root cause: Windows cannot connect to "hhonors.
  Wireless connection failed because Windows did not receive response from the access point or wireless router.
  Detailed root cause: the association to this wireless network failed. Windows has not received response from the router or access point wireless.
  Disturbances: click for more information on troubleshooting low wireless signal quality problems
  I hope this information is to help you to help me take care of this annoying problem. If need be I will bring my OS, but this is my last resort.
  DJGabby

  Hi DJGabby,

  • What is the only computer that is connected to the wireless network?

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer wireless.

  If the steps above do not help, try resetting the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box
   
  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.
   
  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.