Cisco Linksys WRT54GS Wireless-G BroadBand Router

Similar Questions

• Cisco Linksys E1000 Wireless-N Router

  If anyone knows please tell me about "Cisco Linksys E1000 Wireless - N Router" and how it is maximum cost?, coz one of my friends have this router and I think to buy it. so I want to know that all the failures have in this series of router. I would really appreciate it.

  Hi supun.aka,

  I can say that it is one of the stable the Linksys routers.  Once you have configured, make sure that the network is secure and the router's firmware is up to date.

• Connect a printer to lan-card Wireless - G Broadband Router WRT54G2

  I just bought a Wireless-G Broadband Router WRT54G2 and it works very well with my wireless computer, but I can not connect my printer. I use the Linksys Advisor program to search for the printer, but it does not. I see that my router starts by IP 192.le xx and my printers IP is 172.xx. May this be the problem? I had no problem when the printer is connected with a router not wireless.

  Hello

  I installed the printer again and now it works. Thanks for your help.

  Frejlev

• Telephone problems Wireless 2.4 GHZ WRT160N Ultra Rangeplus Wireless N Broadband Router and GE

  I bought the WRT160N Ultra RangePlus wireless N Broadband Router 2 weeks ago and the internet works excellent, but any when I make a phone call or make a phone call using the GE 2.4 ghz Cordless Phone my internet connection is very slow and drops end. I am able to recover the full Internet speed a few minutes later after I hang up the phone. What can I do to fix this?

  Any 5.8 or 6.0 will be fine.

• Wireless-G Broadband Router questions

  I have a router wireless g broadband. Its model name is WRT54GL and 4 people use 2 using son him & 2 others using Wi - Fi to it. I use a wired connection to the router & for some reason any I'm deformation when I race Nascar Legends online. NASCAR Legends was released in 1999. Is there a way to get rid of this distortion issue I have? Let me know in advance. Thank you.

  Try upgrading the firmware on the router and reconfigure the router from scratch.

• Assistance using Windows using Linksys WRT54G wireless remote

  Please someone help me. I have Qwest DSL service, ActionTec Gt701R and Linksys WRT54G - Version 6.

  If I connect directly to the Modem, send a request for Assistance from a distance, the Expert can connect to me without any problems. Here is the IP ticket RA information-

  RCTICKET = "65538,1,71.215.174.28:38861;192.168.0.2:3389; trippc:3389, *.

  When I'm connected wireless using the WRT54G, send a request for Assistance from a distance, the Expert cannot connect to me with an error that the DNS cannot resolve the host name. I assigned a static IP address to my laptop and the Port 3389 to sent to this IP address, according to the Linksys support. She is the information the RA ticket IP for failure.

  RCTICKET = "65538,1,192.168.0.4:1293;10.10.10.50:3389; trippc:3389, *.

  The IP address in this post are internal addresses, the Expert cannot find them on the Internet.

  Anyone have this working? If you have, please send the instructions step by step that followed you.

  Thanks in advance for your help.

  Problem solved on the Forum of Qwest. The modem must be changed to use "a transparent bridging. The the WRT54G must be changed from automatic DHCP to PPPoE.

  Public static IP and Port Forwarding have nothing to do with this issue.

  Thanks for your help.

• Wireless-G Broadband Router with SpeedBooster WRT54GS does not work

  Hello, I need your help. I got the WRT54GS Wirelles-G and I am trying to install it, but at the end of the installation it says the system does not recognize the router, it lights up for internet and Ethernet, but it didn't recognize it.

  I have Windows Vista Home Premium and it has the latest updates, my internet provider is AT & T, but I don't know what the problem, everything goes perfectly hollow installation but in the end, nothing! Help me please.

  Thank you.

  Thank you so much sabretooth, finally working. I have a final request for help. I want to know how can I protect my signal to intruders from the internet, it is possible to configure as a user name and password to access my router? I'll appreciate your help.

  Greetings.

• Can I use as a point of access Wireless-G broadband router?

  I use a router broadband wireless Netgear as main router to the ground floor and connected to the internet. I connected an access point wireless of LinkSys (WAP54G) as a wireless Repeater. Same SSID however, I turned wide dissemination. My office upstairs, I have wifi internet access very well and remain connected indefinitely. However, shortly after connecting to the Office VPN (off-site), the connection drops-both internet and VPN! I ran a loooong cat5 to the office on the floor and when it is connected to WAN I remains connected to two connections indefinitely. I do not have another AP, but I do not have a router Wireless G (WRT - 54G). Can I use this router as an AP, the same SSID, but I noticed on previous posts I should reactivate broadcast on all devices and change the channel settings. I noticed, when I went into the Setup utility 192.168.1.1, I access my netgear router, how to enter the Linksys router?

  Thank you

  Ken

  Nothing beats an AP on the WRT mode. It's just connecting it via the main router LAN port, you can use the access point without going through the router within the WRT component.

  You will have to do exactly what I wrote. Don't change anything on the Netgear.

  1. disconnect your network WRT. Wire a single computer to a LAN of the WRT port.

  2. open the web interface of the WRT to http://192.168.1.1/ since the computer you plugged on the WRT.

  3. on the main change WRT configuration page the LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server.

  4. save the settings. Unplug the computer.

  5. wire one of the LAN ports of the WRT to the Netgear. Do not use the internet port of the WRT!

  That's all. You don't change anything after that. It is the final configuration. You can now access the web interface Netgear http://192.168.1.1/ and the web interface WRT to http://192.168.1.2/

• Wireless and wired router, DHCP and "visibility".

  Okay, it's a bit complicated, but I'll explain better than I can.

  I have a wired Linksys RV082 router. It works very well but is not wireless.  I have a Cisco/Linksys E2500 wireless router for my wireless devices to use.  the RV082 is the network of 192.168.1.x. The E2500 is the network of 192.168.0.x.  Cable Internet goes to the RV082 Wired, and a line out from there to the wireless router.  This all works fine except for a few disadvantages.

  I have an iPad that connects wireless and some of the apps offer a http:// option, so I can transfer files to this application.  I also have a network printer connected to wired and wireless devices do not.

  I have 2 problems:

  (1) in order to transfer files from my laptop (that I hung on the cable network most of the time), I disconnect the wire, wireless, then I can transfer files.  Œuvres, but it's embarrassing.

  (2) I want a netbook that I have on the wireless connection to print on my printer wired network.

  It seems that the 2 networks do not see each other.  Here are the things I've tried:

  (1) I disabled DHCP on the wireless router.  My thought is that requests for an IP address to the wireless router has sent will be transmitted along my wired router... NOT.  On my iPad and Wii, they could no longer connect wirelessly. Strangely enough, with the disconnected wire and wireless connection with my laptop, I've still was getting a 192.168.0.x IP address, even if the DHCP service is disabled on the wireless router.

  (2) thinking I would put manually the wireless router on the 192.168.1.x network, instead of saying things to get an Internet connection IP dynamicaly, I manually the IP value is 192.168.1.245.  Serious mistake.  I couldn't connect at all anywhere then.  The only way I could fix it was to hang on to my laptop computer, assign a static IP address to my laptop on the same network as the router, then I was able to get to the configuration page and to put things like he was.

  Another thing... Even when I'm connected only plugged on my laptop and wireless is disabled, I ping 192.168.0.1 (the wireless gateway) and it returns a value. But, when I try to go in a browser, I get a "page not found" error

  So, how can I get these two networks to play well and see each other?

  Thank you

  Jesse

  Put the router E2500 'bridge' mode and it will transmit the RV082.

  Assign E2500 DHCP, an IP address for itself of thje RV082, it will just be for access to the web administration E2500. System powered via the E2500 wired or wireless IP addresses will be obtained from the DHCP server on the RV082, and these will all be on the same subnet as designed to be plugged into the side of the RV082 LAN.

  Should allow you to do exactly what you want to do.

  I have a similar setup here works well with an E4200V2 right now.

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• Wireless router to modem Homeportal 1800 HG 2wire Linksys WRT54G with questions

  I have the Linksys WRT54G, and I'm trying to use it as the router to my modem 2wire Homeportal 1800 HG wireless.  The 2wire has four ethernet Sockets in the back marked from 1 to 4 and a telephone jack to connect to the wall for AT & T DSL service.

  I have the phone jack connected, and:

  -an ethernet cable

  -to one of the sockets at the back of the 2wire ethernet

  -to the 'Internet' on the Linksys ethernet jack

  - and an ethernet cable

  -to one of the ethernet (1-4) at the back of the linksys

  -to the ethernet port on the computer

  The Linksys is unable to connect via the modem and reports that it may not get an IP address from the PPPoE server.  (Directly connect to the 2wire works well though.)

  Who am I wrong configuration?

  There is no side effect of bridge mode... It is one of the mode in which the modem function. When the modem is in bridge mode, you cannot go online with the computer connected directly to the modem... and you will get a 169.254.x.x ip address.

  So after you convert the modem into bridge mode, you must do the PPPoE settings on the router to go online via router.

• Cisco linksys router and cannot access the wireless network

  We have cisco linksys wireless router.  When we installed everything first, we could connect our wireless laptops to the network.  Now, however, the network is detected, but there is no access to the internet.  We have even a guy from ATT were out and he said that the wireless router has been installed backwards?  He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first.  We can also connect iPod to the wireless network.  They detect the network, but when we enter the password cannot connect.

  Hi JC_3094,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you aren't able to access the Internet.

  The likely causes of this problem is if the router is not configured properly.

  Here are some steps that should help you to solve this problem.

  Method 1:

  Check if the router is configured properly to get access to the Internet.

  Method 2:

  Try the steps mentioned in this link and check:

  This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

   

  If there is a frequent disconnection try to update the firmware on the router and check.

   

  In addition, visit these links for more information:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

• Linksys WRT54G broadcasts simultaneously two wireless signals.

  Everyone knows the Linksys WRT54G Router broadcast two signals?  I did a wirelss security reset in my modem the other day and changed the name of the SSID broadcast.  Now I have the old and the new SSID broadcast at the sametime.  When I go into my router I see that a new figure.  My problem is that the new SSID I created is encrypted with WPA Personal and older SSID broadcasting still is not encrypted, anyone can jump on the signal.  The older SSID has been initially encrypted in WEP... I can't understand this.  Can anyone help?

  FYI... the new SSID signal is very strong and the most original is weak.

  I turned on MAC filtering wireless in order to prevent anyone with a laptop that is close to my network.

  Your router can broadcast only one SSID. If you have changed and configure WPA Personal then that's for sure.

  The unsecured "linksys" network is your neighbor. If you check the web interface of the unsecured "linksys" network you will see that it is another. See the status page.

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• Can't make an Apple iPod Touch to connect to my new Linksys WRT54GL Wireless router.

  Hello.

  I'm trying to set up the iPod Touch (bought for more than a year; using v2.2 (5 G 77) firmware) of the of my client to connect to my new encrypted Linksys WRT54GL Wireless router. After we entered the password (too many sensitive cases and WPA shared key) as five times, he said "Failed to join"FooBarWRT54GL"" immediately.

  The router uses the latest firmware v4.30.13 with these wireless settings:
  Wireless network mode: Mixed (you want to support the devices/clients and B).
  Wireless Network Name (SSID) example: FooBarWRT54GL
  Wireless channel: 1-2, 412 GHZ
  Security mode: WPA2 Personal
  WPA algorithms: TKIP + AES
  Example of WPA Shared key: Abunchofletters aspacetoo

  I guess that this device can do WPA Personal as she saw the WAP and requested a password. We have not had any problems with a year old 15 "MacBook Pro (2.4 Ghz and Mac OS X 10.5.8) and it's easy as cake.

  Any ideas? Thank you in advance.

  I finally got to work, with the help of Apple at the forum: http://discussions.apple.com/thread.jspa?messageID=10650288... I had to do a manual configuration. Don't know why selecting the WAP and entering his password/password didn't work.