T550 vPro

Similar Questions

• Types of POWER connectors required on HP Pavilion t550.uk

  I need to replace the power supply of my HP Pavilion t550.uk to accommodate a new graphics that require 300 Watts. The PSU existing according to me is a BESTEC ATX-250-12Z REC: C.

  Open the machine up there seem to be 5 existing connections:

  (1) CD and DVD - these two players have a rectangular connector with sections of 4 x 1 and 8 wires

  (2) hard - this is very similar to the above but maybe a bit bigger in size.

  (3) motherboard - a large rectangular connector with sections of 10 x 2. Many sons.

  (4) motherboard - a connector 2 x 2 with 4 wire square.

  The new graphics card also requires a 4 pin connection.

  The existing power supply dimensions are 6 inches x 5 1/2 in. x 3 1/2 inches.

  I was considering an Antec E380 or something similar, but I am concerned about the type of connectors that I need. I think that the existing motherboard connectors are compatible with most modern power supplies, but I'm not sure about the others.

  Other http://www.itwinkle.com/be25posuba.html , which is not the same exact model, I can't find any online form describing the connectors on the Bestec. Here, they are described as 4 x PATA.

  -L'Antec has 6 x Molex (4 x SATA, which look completely different from me). http://www.Antec.com/connectors.php?ProdID=04639

  -The Cosair 430CX has 3 x 4 Pin peripheral connectors (4 x SATA).

  Are these Molex or 4 peripheral connectors that I need or do I have to seek alternatives or adapters might be?

  Would appreciate some advice.

  Thank you

  Yes, it's a 4 pin Molex. The same as that used to power the old hard disks IDE/PATA.

• HP dc7700 vpro: cache dc7700 problem

  I upgraded the cpu in my vpro dc7700 pc after upgrading the bios processor cache: l1 l2 and x 2 0bx1 0000bkb 00064kb0a
  Like this and I check with cpuid excessive wristwatch x 6 current and maximum cpu speed x10.5
  I thing my new processor uses half Max so please help me what I do?

  The only thing you can do is to use this software.

  HP will not release patches for this issue.

  The permanent solution is to install a supported processor.

  The best support is the E6700 2.66 Ghz Conroe.

• ThinkPad T550 and VBOX = nogo

  * Cross-posted on the forum of Virtualbox too *.

  Hi all

  have just taken out of service with my trusty X 230 and installed the SSD in a Thinkpad T550 (I7 5600U). In the X 230, everything worked as it was supposed to with this config - 8 Debian, Kernel 3.19.3 and Vbox 4.3.26. 16 GB of memory and hard drive SSD overall.

  When I try to transfer the above configuration to the T550 (kernel compile in the period of transition also) all I get is panic the kernel. I tried with another guest of OS (Linux Mint) under VB to rule out the possibility that doze 8.1 could be the culprit, no joy. Start VB on the new box and lights out. Given that the T550 is executed on a different generation of the Intel compared to the X 230 (Broadwell vs Ivy Bridge).

  Once the kernel has re - compile on the new box, DKMS is obviously something.

  The most popular ideas.

  Kind regards

  Propodopolus

  I'm at a loss to understand your question.

  A workarounf/workaround has been found-

  The nosmap parameter in grub.cfg online "/vmlinuz - linux... "will avoid the lights go out at the start of the VB.

  https://www.VirtualBox.org/ticket/13820 or here https://www.virtualbox.org/ticket/13961.

  Kind regards

  Propodopolus

• T550 - lack of RAM

  Dear Forum,

  So I decided to change the RAM in my T550.

  However, the machine does not start and I get 4 beeps loud.

  Obviously, it is because of the RAM - but is there a reason to explain why it does not work?

  New RAM

  Best regards

  Martin young

  No, voltade normal (1.5V) is a feature of revenge RAM to achieve high performance (high frequency, low latency). Thus, the SPD support low voltage could be restricted.

  Menu, Setup of the BIOS has RAM sticks voltage management, even the hidden Advanced menu. At least SandyBridge on BIOS of Lenovo, laptops IvyBridge.

• Lenovo T530 how to activate vPro

  Hello, my client has bought about 80 T530 portable. They have i5 CPUs.

  He wants to use the vpro technology, but there is no ME configuration in the BIOS.

  Y at - there a Posibility to activate it?

  Thank you very much

  AMT is an optional feature. My understanding is that card mother FRU numbers 04W6823, 04W6824, 04W6825 and 04W6826 have. 04Y1429, 04Y1430, 04Y1431 and 04Y1432 are not. Here is a link to the list of parts for T530:
  http://download.Lenovo.com/parts/ThinkPad/T530_FRU_BOM.PDF

• T550 screen and processor

  Hi, I am looking to buy a T550. However, I am torn when it comes to the processor and the choice of the screen.

  I use my laptop for businesses, use several applications at the same time, which can be quite CPU intensive, but I'm not a graphic designer or anything. The i5-5200 would be enough or it is better past to 5300-i5 or i7?

  My eyesight isn't great as I have so I'm worried that high resolutions will make things too small astigmatism. I have also heard that PWM can be a problem, but I don't know if it's on all the options screen or just a red herring? I do not tend to sit down with clients and show them so ideally I wish the screen to be seen from different angles, so I thought the IPS but can this questions of cause to do the small things on the computer?

  Any advice would be very welcome.

  The DPI scaling is a bit less advanced on Windows 7 than Windows 8.1, especially for programs that are not aware of the DPI scaling. I think that since the Office is by Microsoft that he would support scaling properly in resolution.

  Lower resolution always works the same, of course.

• Uninstalling vpro app from my computer, how can I get rid of the pop-up?

  As above, how can I remove popup approx. vpro?

  Hello

  1. What is the exact message is displayed on the pop-up window?

  I suggest you perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• where can download the drivers in my DELL Dimension XPS T550

  I have a DELL Dimension XPS T550 uses windows xp with processor Pentium III, HDD 20 GB, 512 MB SDRAM (divided into two sticks), 32 MB video card, sound card, modem, usb and dvd - rom card. I want to format but I'm worried because all my cd to install my driver was missing. Someone help where I can download all my drivers. Here is the list:

  Motherboard: Intel Corporation SE440BX-3 AA722396-108
  Serial number: 0007335T1246197B01FV

  Video card: NVIDIA RIVA TNT2 Model 64 Pro 64/model

  Sound card: Creative SB Live! Value (WDM)

  Multimedia: CineMaster C 3.0 WDM main Driver

  Modem: Generic SoftK56 #2

  USB Card: NEC PCI

  DVD - ROM drive: TOSHIBA DVD - ROM SD-M1212

  I'm trying to find all the drivers of this on dell.com using my service tag (R3BQ7), but there is not available for download.

  I'm trying to find all the drivers of this on dell.com using my service tag (R3BQ7), but there is not available for download.

  It seems that this computer is so old that Dell isn't fully can't stand it anymore.  Pages that appear to relate to your system in a generic way, all seem to suggest that you have added a new video card, at least his new card and perhaps other devices.  You can search the drivers for those devices on the websites of their respective manufacturers.
  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals
  http://support.Dell.com/support/eDOCS/systems/DKUB/
  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/

  In any case, it does not appear in the documentation above that this computer has never provided with Windows XP or that Dell had XP drivers for everything.

  How did you install XP first?

  See what 2004 post (it's underlining):

  > My machine is an old DELL Dimension XPS T550 with 384 meg RAM. A
  > A few years ago, DELL told me that WIN XP cannot be installed
  > on my machine.
  >
  > Has this changed? Will WIN XP install without problem on this machine
  > nowdays?
  >

  Dell should have said they will not support XP on XPS T parts series in
  General XP will work fine on your PC. There is a tool of material control on the
  CD, run first to see if it detects problems. Most of the problems are
  come from things like maps its etc. In addition, he was notified of this update
  you the BIOS with the latest version.

• HP EliteBook 8470p: Vpro Configuration not supported (reading) Errorlevel = 7

  I used AMTBrand tool for error "machine warning is not in condition.

  but this output with error "Vpro Configuration not supported (reading) Errorlevel = 7"

  any suggestion?

  Now all Ok Guy

  Put in touch with Hp Support.

  they sent the files and the instructions, as they provide guidance and now everything is ok.

  Thank you all for Guide.

• Place 11 7130 vPro freezing problems

  So I just got my vPro 11 place, 7130 today (and I really like it so far) but I noticed that I've met a few technical problems.  I tried searching for similar problems, but nothing helped.

  My problem is that the entire Tablet freezes periodically when not directly connected to the power source.  Sometimes the screen goes all black, but I can feel the haptic of the Windows key.  Sometimes the 80% upper of the screen turns into what looks like a field of stars.  It is quite difficult to explain, and I try to take a picture of it the next time it happens.  When one of these problems occur, it is a quick reset and the problem is solved, but it was kind of annoying.

  Everyone knows these same problems?  Let me know if I need to provide any other information.

  Thank you!

  Click Start-> all-> Intel HD Graphics Control Panel Apps. Click on 'Power', then click on "Off" next to Panel to refresh.

• T550 laptop keyboard light

  How can I get the backlight to work on the keyboard?

  Assuming that you have the option-backlit keyboard, Fn + SPACEBAR

• Venue Pro 11 vPro 7130 TPM issue (now brick)

  Power of my Tablet and I get this message at startup;

  A configuration change was requested to clear TPM (Trusted Platform Module) computer

  Press F12 to clear the TPM

  Press ESC to reject this change request and continue

  TPM has not been configured. And support could find no way to press ESC...

  There's nothing that will bring this back, USB keyboard, gets no power from USB port again... so it cannot ESC or F12

  on the dock of the tablet with USB connected keyboard will not see the keyboard.

  PWR + flight + gets selected... diagnosis starts and that's it. Flight or flight + does nothing (can't see any menu)

  PWR + flight - does nothing

  Dell support across the pond of ideas... scripts are very short in this area...

  Any ideas?

  Monty

  This occurs because the BIOS is not enumerate the USB hub before posting the error message.   This was done to meet the needs of Microsoft QuickStart.  Unfortunately, this means that there is no way out of the loop of the error in the fact that you're stuck.   The new BIOS will solve this problem to proceed by turning the volume up and down to interact with this prompt, but which obviously does not help at this point.    At this point, the only solution is to swap the unit.   This probably occurred because the TPM secure has been activated and data property has been changed after that.

  When you get your new machine, you can change the behavior of the PUBLICATION of the minimum depth (for that lists the USB), or flash A07 to resolve (when available).

  Sorry for the trouble.

• 11 venue Pro i3 (non-vPro) trouble quitting hybrid

  Hello

  I met two issues that prevent me to take advantage of the hybrid Windows 8.1 shutdown mode and 10: if it is activated, the system will occasionally (up to half of the time) fail to start after the Dell logo is displayed. This can be caused by using Windows 10 (build 10130 right now), but I have not seen this problem on my desktop PC running the same version. Disabling the feature or restart of work, however.

  Another issue is that even once with the stop of the hybrid has allowed sometimes the power button does not work, return to work perfectly after a reboot or by disabling the feature of the hybrid, turn it off and turn it back on again. Given that perform a reboot does not use the hybrid of hibernation feature the session of the kernel, it seems to be somehow related.

  We will free qualified pilots and an update of the BIOS for Windows 10 fairly quickly.   I think your problem will be solved.

• Place 11 Pro 7130 i3 (model no-VPro) connected ongoing sleep issues again?

  Hello

  I noticed that despite a number of improvements with the last firmware panel touch (the rare involuntary repetition of letters) and still a problem of firmware (no more wifi from the A13 firmware problem) device always on my 11 venue Pro model i3: during sleep sessions connected excessive battery drain.

  What happens is that, after leaving the appliance for 8 hours (overnight) connected standby battery has already drained almost 50%, which, as far as I understand, is much higher than that should be the case, while often after the awakening of the device, I found that another application may have open or some kind of parasite entries occurred.

  For now I've worked around the issue by disabling connected standby mode of the registry, which has the additional advantage of allowing hybernation in the stop menu. This, however, is a suboptimal solution because it seems necessary to either press the Windows logo on the chassis of tablets and THEN press the power button for a good second to wake up the unit, or with the keyboard connected, it is necessary to close the Tablet and re - open, followed by the same press the power button.

  Given that I seem to not be the only one with this problem and the lack of software updates for the device-specific over the past months, I would ask Dell if these issues of connected intelligence are still studied on the 7130 with a possible solution to come in the form of firmware updates or otherwise , or if attention was completely shifted to the model with processor Broadwell followed 7140.

  Update for the people of the future: using this version of the SD card reader driver seems to fix the problem, which should have returned to a default restart driver driver specified on the support of the 11 Pro place Web site must be installed in Windows.