Similar Questions

• The repetitive Image defects appear on the printed Page

  Hi there I'm having trouble with my HP LaserJet 6 p printer repetitive Image defects appear on the printed Page. Can someone help me with this. Please, I beg you.

  Here is a link that can help you with faults.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 110 & prodSeriesId = 25477 & prodTypeId = 18972 & prodSeriesId = 25477 & objectid = bpl10515

  Let me know if it works, or that it is useful, thank you.

• HP Officejet 7310 all-in-one: on the printed page without is not the margin settings and are shredded

  During a few days ago only, printer started the show message paper jam when the printed page was all but probably 1/8 "already out.  Flicking the paper really brought the page on the rest of the way.

  I remove the paper two-sided accessory to find any paper, but there is no paper jam that I can see.

  Also, in the middle of printing, sometimes it makes a loud squeaking (I guess), but kept in printing and sends the page completely.

  Then I started to notice that the left margin could tilt inward I look towards the bottom of the page or it can be different from one Word page to another and a blur occurs in a word here and there.

  Finally, on the printing of Excel pages, I see a different left margin on what I consider every 2 lines.  This, of course, affect the right margin in the same Manor, and the vertical cell lines also vary according to the variation in the left margin.

  The HP software tells me there is no update for me to download.  However, I do know she never talked about everything.  I have not seen this specific problem listed.

  @Sunny-Gal Hello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are experiencing printing problems. I would like to help!

  I suggest to remove the cartridges and perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Why my image does not reach the edges of the printed page, but seems in good condition in pdf?

  Most desktop printers cannot image all the way at the edge of the page.

• Why can't put 2 text boxes on the same page?

  I am trying to put 2 text boxes on the same page, but the 2nd box is still empty. However, if I move the 2nd box on the next page, or even on a previous page, the text block appears suddenly.

  Why can't put 2 text boxes on the same page?

  The little thing at the end of this first page must be a page break. Which is just what its supposed to change it to a Frame break or break column if you want to have the text to jump to the next available section.

• Text on the printed page is turned

  I have a strange problem with my printer. All printed pages have text turned on him by a few degrees.

  This is example:

  

  I tried to calibrate it in all its possible forms, but the problem is still pending.

  My printer model is: JaserJet Pro M275
  I use Wubdiws 8.1

  the problem remeins the two when I print from pc or copy directly from the scanner.

  What can I do about it?

  If the paper is will minimize (at an angle) of the plateau that it will certainly lead to the question you see.  I would say in making sure that the paper guides are properly snugged against the paper as shown on page 17 of the manual ite.  Also, make sure that the paper tray is firmly engaged (a "click" on each side) as shown on page 8, figure 11 of the manual here.

  Is your printer still under warranty?  You can check on the page here.  If the unit is under warranty and the previous steps do not resolve the problem then I suggest certainly call to HP.

• printer-i can, t get my text to reduce the print size, it is also biased

  the size of my text has been o.k., then the next day, the print size was too large, the entire page is now off to the right. I tried to reduce the size of printing with the settings, but it

  won, t downsize.what can I do to get gauged right?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  Method 1:

  If you use windows7, I suggest you to follow the links and check out them.

  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 2:

  I also suggest you to check the printing preferences. Go through the printer manual on how to change the printing preferences

  For Windows Vista

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  For Windows 7

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

• The printer page size setting does not work in Photoshop 5.1 with printer Xerox

  I am trying to print a size over 8.5 x 11 and Photoshop will not change the size, even if the setting of the printer is now in the largest size.  Illustrator and other programs will print but this Photoshop fails.  This is a problem in 32 and 64 bit versions.  Help!

  I found the following on the Xerox site... hats off to T Robinson:

  Re: Photoshop CS6 on Win 7 x 64 only prints the format letter on Workcentre 7655

  20/03/2013 12:28

  We have a Xerox WorkCentre 7435 PCL6, and I had a similar problem. I found a workaround in Photoshop CS5, I will describe where it is useful to others. I just upgraded to Photoshop CS6 however, and workaround no longer works with it. Instead, I get an error message if I print a report of the story of Job. The message is partially cut off at the right margin of the page, but the part I read says: "done with error(016-799): print educatio... failure detected in decomposer.» (The selection button indicates the part of the message that is cut off. What follows it appears on the next line down. I downloaded all updates to CS6 to see if that would help, but it didn't.

  Here's the solution that worked for me on CS5:

  1) click on "Printer setup" in the print dialog box

  (2) on paper in the drop-down menu, select 'Advanced paper selection.

  (3) select the status bar where your tabloid (or legal) size of paper is loaded

  4) click the button at the right end of the "Paper size" field to display the paper size dialog box.

  5) click on the down arrow button at the right end of the field 'Of the Original Document size' and select 'Tabloïd' (or 'Moral') in the menu.

  6) click OK to close each of the open dialog boxes until you return to the print dialog box and print your document. Print preview should update to show you a preview which reflects the selected paper size. (This can take a few seconds to arrive).

  It worked for me in CS5. Unfortunately, as indicated above, it doesn't seem to work on the CS6. The only solution I can offer for CS6 is to save the file as a PDF and print from Acrobat. It works without problem, but there are a lot of trouble to go whenever I need to print something other than letter size.

  If someone finds a better solution to workaround in CS6, let me know.

• Adobe Photoshop CS4 Question adding Image to the printed Page

  Hello

  My images (more often. TIFF - but .jpg and .png) 'fade' through the pages of old that I print on. I pull the image in Photoshop and have tried all kinds of variations (compared to my help of Photoshop and Photoshop books) and then I print the images on the pages of old books. He has also done this with color images that I scanned in. How I do my non-transparent image on the page of the book? I have attached a sample of what's going on. Also the image before I add it to the page of the book. I don't know that I just need to do something simple. Thanks in advance for any help you can provide.

  Jaci

  

  

  If you use a standard inkjet or LaserJet printer this problem still occurs.  You have to look in screen printing, if you want your image of the clown to appear as if he's sitting on top the text rather than the text of bleeding through it.  Silkscreen, although not in all cases, can use ink opaque (it's like paint, but it's called ink).

• The print page opens not when I try to print a Web page.

  I use Firefox for many months and so far I have had no problem printing a Web page. I was away for a week and discovered this problem yesterday when I tried to print a Web page. Maybe there was some changes during the week that I'm not aware of?

  This happens on all websites or is it on particular websites?

  Normally, a button to launch a page in the print format appears in a new window. Blocker integrated in Firefox allows popups generated by a user by clicking, but if you have additional security modules, maybe one of them is blocking those.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

• Change the order of the printed pages

  My Deskjet 2540 prints page 2 before page 1; can I change the order so that it prints page 1, page 2, page 3, etc and if so, HOW?

  Ah... I'm sorry.  This printer does not have a duplexer, if you can't do two sided.  You must do it manually print the odd pages first and then put them back in and print the even pages.  I'm sorry.

• Series of HP Photosmart C5100: only half of the print page

  Original page version:

  

  my printer of the page version:

  

  How can I solve this problem?

  Hey @OMGEngi,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see you have some problems with the all-in-one Photosmart C5100 printer do not print in the right place on the page. I can help with that.

  First of all, make sure that the printer is plugged directly into a wall outlet , not a surge protector. It is this document explains How to solve problems of choice with the printer. This document describes a slightly different issue from what you describe, but it provides the same troubleshooting steps.

  If after completing the document, you still experience this problem then the printer must be replaced. You can contact HP support by clicking here and filling out the form below.

  I hope this helps and I hope you have a great week!

  If this resolve that your problem then please let others know by clicking on accept as Solution below my post.

  If you want to let others know that you will appreciate my help then please click on thumbs to the top of the icon on my post.

• Stops at halfway through the printing page...

  My Officejet 6700 Premium printer stops printing half way through the page. How can I fix?

  Hi @springie,

  Welcome to the HP Forums!

  I understand that your printer HP Officejet 6700 Premium stops printing half way through the page. I'm happy to discuss this issue for you!

  A few questions for you:

  • What happens when the printer stops printing? You get an error message? A paper jam? A blank page?
  • What operating system do you use? Windows or Mac? What version? http://www.whatsmyos.com.
  • How is the printer connected? Wireless, Ethernet or USB?
  • You use genuine HP cartridges or refills?
  • None of your ink cartridges are low or empty?

  In the meantime, if you are using Windows, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• Remove header and footer on the print page

  Hi, I need to have removed the header & footer when you print a page.

  How would I implement this.

  I need to print from the AOL 9.7 software and the printer is a HP Officejet J4580

  Thank you

  It is a function of your printer software.  You will need to find the settings in the software.

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.